No description available.

No description available.

No description available.

Systems Engineering was applied to Terraset, a school underground, heated and cooled via the sun. The Systems Engineering process (since it occurred after design) consisted of Needs Analysis, Functional Analysis, Test Requirements Analysis and System Life Cycle Cost Analysis. The school had never been Systems Engineered and the processes revealed a long list of requirements still lacking. The results of the thesis are applicable to a new design taking place at the Burke Center Elementary School. / M.S.

M.S.

A model was developed to predict velocity profiles of radial wall jets produced by ceiling fans and flowing over broiler chickens. Broilers were modeled by balloons with paper cylinders simulating the necks. Wall jet data was recorded for 91.5, 83.8 and 71.1 cm radius fans that were rated at 220, 160, and 108 W, respectively. Each fan was suspended 2.44 m above the floor and operated at four speeds. Applications of the model include 1) calculation of optimum design specifications for ceiling fan applications in broiler houses and 2) prediction of data for managerial decisions concerning existing ceiling fan applications. Model inputs are the fan radius and the characteristic velocity. The characteristic velocity was defined as the maximum air velocity 30 cm below the blades. The wall jet model was interfaced with a broiler growth model for heat stressed broilers to simulate summer conditions and to predict the additional weight gain due to the wall jet. Also, the wall jet was developed to predict the air velocity near the litter to aid litter management decisions. Ceiling fan applications in the southeast, used in conjunction with the summer model, have the potential of increasing summer broiler production by 10% and decreasing fan energy consumption by 8 to 12%. The model may be used to optimize the benefit to the producer. / Ph. D.

Past research has shown that natural ventilation can be used to satisfy upwards of 98% of the yearly cooling demand when utilized in the appropriate climate zone. Yet widespread implementation of natural ventilation has been limited in practice. This delay in market adoption is mainly due to lack of effective and reliable control. Historically, control of natural ventilation was left to the occupant (i.e. they are responsible for opening and closing their windows) because occupants are more readily satisfied when given control of the indoor environment. This strategy has been shown to be effective during summer months, but can lead to both over and under ventilation, as well as the associated unnecessary energy waste during the winter months. This research presents the development and evaluation of a model-based control algorithm for natural ventilation. The proposed controller is designed to modulate the operable windows based on ambient temperature, wind speed, wind direction, solar radiation, indoor temperature and other building characteristics to ensure adequate ventilation and thermal comfort throughout the year without the use of mechanical ventilation and cooling systems. A midrise student dormitory building, located in Portland OR, has been used to demonstrate the performance of the proposed controller. Simulation results show that the model-based controller is able to reduce under-ventilated hours to 6.2% of the summer season (June - September) and 2.5% of the winter (October - May) while preventing over-heating during 99% of the year. In addition, the model-based-controller reduces the yearly energy cost by 33% when compared to a conventional heat pump system. As a proactive control, model-based control has been used in a wide range of building control applications. This research serves as proof-of-concept that it can be used to control operable windows to provide adequate ventilation year-round without significantly affecting thermal comfort. The resulting control algorithm significantly improves the reliability of natural ventilation design and could lead to a wider adoption of natural ventilation in appropriate climate zones.

published_or_final_version / Environmental Management / Master / Master of Science in Environmental Management

<p>The present environmental concerns and the rising human requirement for solutions with better comfort and lower costs have resulted in an increased awareness for the energy use in the built environment. Technical advances in building structural systems and materials, heating and other comfort-providing systems and controlling strategies all lead to the integration of building technology with the function of buildings and the aesthetics. Therefore, in the process of improving the performance of energy systems and increasing the energy efficiency, integrated system approaches are of high importance. Performing the necessary energy analysis before any construction-installation occurs can help designers and decision makers reach guided solutions. Hence, a broad range of calculation tools for evaluating the operation of energy systems and the controls in buildings have been developed the latest years with different levels of complexity and angles of focus.</p><p>However, research and development regarding holistic energy system designs and techniques are in their infancy. The standard tactic has been to isolate system parts, study them as stand-alone sub-systems and focus on optimising components or processes of a complex function. In the present study, it is demonstrated the necessity for uniting energy engineers, architects, installers and technicians regarding decision making upon the energy use for heating, ventilation and air-conditioning (HVAC) in the built environment. Systems approach has been employed for studying the research issue that is presented in the current thesis. An extended part of this treatise has been devoted to systems thinking in practice.</p><p>The thesis demonstrates systematic methods of modelling and analysing certain, integrated, domestic, HVAC applications. The reference system boundaries enclose the building as a construction and as a dynamic function, a comfort-providing system based on a heat pump, a low-temperature hydronic heat distribution system and controls in a residential application. Obviously, these are not the only components met in a hydronic heating system. Numerous pieces of equipment, as piping, circulating pumps, expansion tanks, zone valves, relief valves and other essential elements are needed to make a safe and functional heating system. However, this study focuses on the analysis of the chosen reference system. Several models have been developed in the computational tools of TRNSYS and EES. These tools have been employed because they allow co-solving, hence the integrated system as well as the interaction between the different parts of the system can be studied.</p><p>The foremost result of this study is that approaching the system as a whole provides a better picture of the operation of every system component and the interaction between them. Explanations are given for the parameters that have a significant impact on the system’s performance. The thesis shows the importance of factors that are not easy to predict, as well as the difference in the building’s behaviour under fast changing thermal loads when the incorporated thermal mass is altered. Finally, implementing sophisticated controls for reducing the energy costs without compromising thermal comfort is vital.</p>

The present environmental concerns and the rising human requirement for solutions with better comfort and lower costs have resulted in an increased awareness for the energy use in the built environment. Technical advances in building structural systems and materials, heating and other comfort-providing systems and controlling strategies all lead to the integration of building technology with the function of buildings and the aesthetics. Therefore, in the process of improving the performance of energy systems and increasing the energy efficiency, integrated system approaches are of high importance. Performing the necessary energy analysis before any construction-installation occurs can help designers and decision makers reach guided solutions. Hence, a broad range of calculation tools for evaluating the operation of energy systems and the controls in buildings have been developed the latest years with different levels of complexity and angles of focus. However, research and development regarding holistic energy system designs and techniques are in their infancy. The standard tactic has been to isolate system parts, study them as stand-alone sub-systems and focus on optimising components or processes of a complex function. In the present study, it is demonstrated the necessity for uniting energy engineers, architects, installers and technicians regarding decision making upon the energy use for heating, ventilation and air-conditioning (HVAC) in the built environment. Systems approach has been employed for studying the research issue that is presented in the current thesis. An extended part of this treatise has been devoted to systems thinking in practice. The thesis demonstrates systematic methods of modelling and analysing certain, integrated, domestic, HVAC applications. The reference system boundaries enclose the building as a construction and as a dynamic function, a comfort-providing system based on a heat pump, a low-temperature hydronic heat distribution system and controls in a residential application. Obviously, these are not the only components met in a hydronic heating system. Numerous pieces of equipment, as piping, circulating pumps, expansion tanks, zone valves, relief valves and other essential elements are needed to make a safe and functional heating system. However, this study focuses on the analysis of the chosen reference system. Several models have been developed in the computational tools of TRNSYS and EES. These tools have been employed because they allow co-solving, hence the integrated system as well as the interaction between the different parts of the system can be studied. The foremost result of this study is that approaching the system as a whole provides a better picture of the operation of every system component and the interaction between them. Explanations are given for the parameters that have a significant impact on the system’s performance. The thesis shows the importance of factors that are not easy to predict, as well as the difference in the building’s behaviour under fast changing thermal loads when the incorporated thermal mass is altered. Finally, implementing sophisticated controls for reducing the energy costs without compromising thermal comfort is vital. / QC 20101008