The thesis reviews current admission control schemes in cellular IP networks. It proposes an improved version of Threshold Access Sharing and a new scheme: weight-based scheme. Finally, an admission control scheme for hierarchical cellular network is introduced.

The asymmetrical arrangement of cellular structure allows for an accurate functional adaptation at all levels of hierarchy, which derives excellent features for the development of new materials. The main objective of introducing a hierarchy into cellular structures is to improve the mechanical behaviour of the material while maintaining its elastic properties. A part of this work is devoted to the literature review related to the lightened cellular polymeric materials with hierarchical cellular structure. The rest is focused on the preparation of PLA based polymer structures using 3D printing, followed by a saturation in CO2 and a foaming in a silicon oil at elevated temperature. Samples were prepared from natural and white PLA filaments. Based on a series of experiments, optimal conditions for the saturation and foaming process were identified. Through 3D printing and foaming, a one-, two- and three-level hierarchy was introduced into the beam-shaped samples and the effect of the internal cell arrangement on the strain response of the material was examined by the means of a mechanical three-point bending test. Increasing the level of the hierarchy led to an increase in material resistance, which resulted in high values of strength and strain energy (toughness) based on the samples density. The best results were achieved by samples with “sandwich” structure with three levels of hierarchy and 30% filling. Despite the shorter plateau, there was a significant increase in strength and strain energy compared to gradient structures. At the same time, the contribution of the polymer structures prepared in this field of research was demonstrated by comparison with the theoretical model.

Over recent years, wireless communication systems have been experiencing a dramatic and continuous growth in the number of subscribers, thus placing extra demands on system capacity. At the same time, keeping Quality of Service (QoS) at an acceptable level is a critical concern and a challenge to the wireless network designer. In this sense, performance analysis must be the first step in designing or improving a network. Thus, powerful mathematical tools for analysing most of the performance metrics in the network are required. A good modelling and analysis of the wireless cellular networks will lead to a high level of QoS. In this thesis, different analytical models of various handoff schemes and resource re-allocation in homogeneous and heterogeneous wireless cellular networks are developed and investigated. The sustained increase in users and the request for advanced services are some of the key motivations for considering the designing of Hierarchical Cellular Networks (HCN). In this type of system, calls can be blocked in a microcell flow over to an overlay macrocell. Microcells in the HCN can be replaced by WLANs as this can provide high bandwidth and its users have limited mobility features. Efficient sharing of resources between wireless cellular networks and WLANs will improve the capacity as well as QoS metrics. This thesis first presents an analytical model for priority handoff mechanisms, where new calls and handoff calls are captured by two different traffic arrival processes, respectively. Using this analytical model, the optimised number of channels assigned to II handover calls, with the aim of minimising the drop probability under given network scenarios, has been investigated. Also, an analytical model of a network containing two cells has been developed to measure the different performance parameters for each of the cells in the network, as well as altogether as one network system. Secondly, a new solution is proposed to manage the bandwidth and re-allocate it in a proper way to maintain the QoS for all types of calls. Thirdly, performance models for microcells and macrocells in hierarchical cellular networks have been developed by using a combination of different handoff schemes. Finally, the microcell in HCN is replaced by WLANs and a prioritised vertical handoff scheme in an integrated UMTS/WLAN network has been developed. Simulation experiments have been conducted to validate the accuracy of these analytical models. The models have then been used to investigate the performance of the networks under different scenarios.

Over recent years, wireless communication systems have been experiencing a dramatic and continuous growth in the number of subscribers, thus placing extra demands on system capacity. At the same time, keeping Quality of Service (QoS) at an acceptable level is a critical concern and a challenge to the wireless network designer. In this sense, performance analysis must be the first step in designing or improving a network. Thus, powerful mathematical tools for analysing most of the performance metrics in the network are required. A good modelling and analysis of the wireless cellular networks will lead to a high level of QoS. In this thesis, different analytical models of various handoff schemes and resource re-allocation in homogeneous and heterogeneous wireless cellular networks are developed and investigated. The sustained increase in users and the request for advanced services are some of the key motivations for considering the designing of Hierarchical Cellular Networks (HCN). In this type of system, calls can be blocked in a microcell flow over to an overlay macrocell. Microcells in the HCN can be replaced by WLANs as this can provide high bandwidth and its users have limited mobility features. Efficient sharing of resources between wireless cellular networks and WLANs will improve the capacity as well as QoS metrics. This thesis first presents an analytical model for priority handoff mechanisms, where new calls and handoff calls are captured by two different traffic arrival processes, respectively. Using this analytical model, the optimised number of channels assigned to II handover calls, with the aim of minimising the drop probability under given network scenarios, has been investigated. Also, an analytical model of a network containing two cells has been developed to measure the different performance parameters for each of the cells in the network, as well as altogether as one network system. Secondly, a new solution is proposed to manage the bandwidth and re-allocate it in a proper way to maintain the QoS for all types of calls. Thirdly, performance models for microcells and macrocells in hierarchical cellular networks have been developed by using a combination of different handoff schemes. Finally, the microcell in HCN is replaced by WLANs and a prioritised vertical handoff scheme in an integrated UMTS/WLAN network has been developed. Simulation experiments have been conducted to validate the accuracy of these analytical models. The models have then been used to investigate the performance of the networks under different scenarios.