Spelling suggestions: "subject:"cooked®"" "subject:"booked®""
1 |
Rug making : an exploration /Cooper, Karen Breen. January 1990 (has links)
Thesis (M.F.A.)--Rochester Institute of Technology, 1990. / "Selected bibliography by subject": leaves 39-40.
|
2 |
Code provisions and practical design examples of hooked bar anchorageKim, Young Hye 2009 August 1900 (has links)
In structural concrete, hooked bars are used to shorten anchorage length when the requirements for straight bar anchorage cannot be provided within the available dimensions of elements. The objective of this study was to provide an overview of hooked bar anchorage. Design examples and structural details are based on Building code requirements for structural concrete (ACI 318-08) and commentary. Examples of standard hooks in exterior beam-column joint and hooked bar anchorage details for reinforced concrete beam-SRC column joints are discussed. The general behavior of anchorage of hooked reinforcing bars is summarized from a review of previous studies. Then, design requirements for the development length of standard hook are discussed and used in an example. An example of the use of hooked bars in reinforced concrete beam-SRC column joint is provided. Four options for short development length are presented and compared: Adding more reinforcement, welding bars, confinement by steel column flanges, and anchorage by plate welded between flanges. / text
|
3 |
A survey of mat hooking traditions in central Nova Scotia, 1900-1985 /MacDonald, Lynn Marie. January 1988 (has links)
Thesis (M.A.)--Memorial University of Newfoundland. / Typescript. Bibliography: leaves 245-255. Also available online.
|
4 |
Improving an Application Using GamificationUthman, Diaco, Åkerman, William January 2020 (has links)
It is believed that roughly two out of three users stop using a new application within 90 days. This causes problems for developers, trying to produce a successful application with many users. A strategy that has proven to be beneficial is gamification. However, as a developer, it is difficult to know which functionalities to use. Therefore, this thesis looks at which functionalities can increase the likelihood that an application is successful. Knowledge about the subject was collected through a literature study. Nir Eyal’s theories about gamification in his book “Hooked” and related works about gamification was two ways of collecting this knowledge. Also, through performing a case study, where existing applications were observed, it was possible to observe applications with gamification in mind. Thereafter, an attempt was made to implement gamification functionalities into The Bronson Project’s application. Four functionalities were chosen based on the literature study and case study. They are points, own goals, progress bars and achievements. The implementation was evaluated with the conduction of a qualitative interview study, where 9 testers of the application were interviewed. The overall response from the interviews was positive. Interviewees were positive towards the implemented functionalities and believed that the decision to let users decide their own goals was positive. Finally, it was concluded that two functionalities seem to be important for a successful gamification in an application. A progress is important in the application, and a way to count the progress. The conclusions were drawn based on the interviews, along with our own opinions from the case study. / Uppskattningsvis lämnar två av tre användare en applikation inom 90 dagar. Det skapar problem för utvecklare, när de försöker skapa en lyckad applikation med många användare som stannar. En strategi som visat sig vara framgångsrik är spelifiering. Däremot är det svårt för utvecklare att veta vilka funktionaliteter som är bäst att använda. Därför tittar denna uppsats på vilka funktionaliteter som är viktiga för en lyckad implementation av spelifiering. Kunskap om ämnet samlades genom en litteraturstudie. Nir Eyals teorier om spelifiering i boken ”Hooked”, och relaterade arbeten var två sätt att samla kunskapen. Dessutom genomfördes en fallstudie, där existerande applikationer med spelifiering observerades. Därefter gjordes ett försök att implementera spelifieringsfunktionaliteter i The Bronson Projects applikation. Fyra funktionaliteter valdes ut baserat på litteraturstudien och fallstudien. Dessa var funktionalitet för poäng, framstegsfält, egna mål och prestationer. Implementationen evaluerades genom att intervjua 9 testare av applikationen. Den generella responsen från dessa intervjuer var positiv. En positiv respons som vi fick var att de intervjuade uppskattade funktionen att kunna bestämma sina egna mål. Avslutningsvis kan man säga att två funktionaliteter är viktiga för en lyckad spelifiering. Den ena är att användaren ska kunna utvecklas på något sätt. Och den andra är att man ska kunna se utveckling på något sätt.
|
5 |
Bonding mechanisms and strength of hooked-end steel fibre reinforced cementitious compositesAbdallah, Sadoon Mushrif January 2017 (has links)
Concrete is a strong material as to its compressive strength. However, it is a material with a low tensile and shear strength, and brittleness at failure. Concrete has to be reinforced with appropriate materials. Steel fibre is one of the most common materials currently being used to develop reinforced concrete, which may replace partially or completely conventional steel reinforcement. Successful reinforcement of concrete composite is closely related to the bond characteristics between the reinforcing fibre and matrix. The effective utilisation of steel fibre reinforced concrete (SFRC) requires in-depth and detailed understanding of bonding mechanisms governing the tensile behaviour. In response to this demand, this study embraced two main areas: understanding the reinforcing mechanisms of fibres in SFRC and material's post-cracking behaviour. Comprehensive experimental and theoretical programmes have therefore been developed: the experimental work is subdivided into three parts. The first part was to investigate the effect of various physical parameters, such as fibre characteristics (i.e. geometry, inclination angle, embedded length, diameter and tensile strength) and matrix strength which controls the pull-out behaviour of steel fibres. The second part is concerned with the assessment of the bond mechanisms of straight and hooked end fibres after exposure to elevated temperatures and varying matrix strength. The third part is devoted to gain further insight on the bond mechanisms governing the post-cracking behaviour through uniaxial and bending tests. It was found that the varying hook geometry and matrix strength each had a major influence on the pull-out response of hooked end fibres. As the number of the hook's bends increased, the mechanical anchorage provided by fibre resulted in significant improvement of mechanical properties of SFRC. The reduction in bond strength at elevated temperatures is found to be strongly related to the degradation in properties of the constituent materials, i.e. the fibre and concrete. The most effective combination of matrix strength and fibre geometry was found to be as follows: 3DH (single bend) fibre with normal-medium strength matrix, 4DH (double bend) fibre with high strength matrix and 5DH (triple bend) fibre with ultra-high performance matrix. Two analytical models to predict the pull-out behaviour of hooked end fibres were developed. Both models were able to predict the pull-out response of SFRC made from a variety of fibre and matrix characteristics at ambient temperature. This work has established a comprehensive database to illustrate the bonding mechanisms of SFRC and anchorage strengthening of various hooked end fibres, and this should contribute towards an increasing interest and growing number of structural applications of SFRC in construction.
|
6 |
Morphodynamique des deltas de jusant et des flèches sableuses en domaine macrotidal : les embouchures de l'Orne et de la Dives / Ebb-tidal delta and sandspit morphodynamics in macrotidal environment : Orne and Dives inletsPellerin Le Bas, Xavier 18 December 2018 (has links)
L'objectif de ce mémoire est de comprendre le fonctionnement hydro-sédimentaire des embouchures tidales dominées par la marée et la construction d'une flèche sableuse à crochets perpendiculaires. Deux sites voisins ont été choisis : les embouchures de l'Orne et de la Dives sur la côte du Calvados (Normandie). L'utilisation de données d'agitation et topographiques, acquises selon plusieurs échelles spatio-temporelles, permet d'étudier la morphodynamique de ces deux embouchures.L'embouchure de l'Orne possède une évolution soumise à une forte pression anthropique causée par de nombreuses infrastructures portuaires. Elle est comparée à celle de l'embouchure de la Dives, où l'impact anthropique est plus limité. Il apparaît que ces deux embouchures partagent les mêmes mécanismes de transports sédimentaires, avec une composante transversale importante. Ce transport vers la côte est assuré par la migration de barres de swash sur les parties aval-dérive des deltas de jusant. Ces barres de swash possèdent des volumes et des vitesses de migration similaires, comprises entre 3.5 et 8.0 m/mois.Contrairement à la Dives, les côtes en amont et en aval-dérive de l'embouchure de l'Orne sont en accrétion. Si en amont, cette accrétion suit les nombreuses phases de construction du port de Caen-Ouistreham, en aval se développe depuis un peu plus d'un siècle une flèche sableuse à la morphologie atypique. En effet, cette flèche possède plusieurs crochons emboités, dont les extrémités - les crochets - sont perpendiculaires au corps à la flèche. Il est démontré que l'attachement des barres de swash à la côte est responsable de la formation d'un nouveau crochon. La diffraction des vagues au niveau de l'extrémité des barres de swash et des crochons, ainsi que les directions locales de l'agitation, expliquent la formation des crochets perpendiculaires à l'extrémité des crochons. / The aim of this thesis is to understand the mechanisms of sediment bypassing at tidal inlets in a macrotidal environment and the formation of a sandspit with perpendicular hooks. Two closed areas are studied, the Orne and Dives inlets on the coast of Normandy (France). Wave and topographic data, at several space-time scales, are used to study the inlet morphodynamics.The Orne inlet is affected by strong human impacts due to several port facilities whereas the Dives inlet knows a limited anthropogenic impact. The study of the two inlets allows to deduce the impact of the human activities in the sediment transport patterns. The Orne and Dives inlets share the same mechanisms of sediment transport. Both show a major cross-shore component of the transport, underlines by the swash bars migration over the ebb-tidal deltas. All swash bars have similar volumes and migration rates, between 3.5 and 8.0 m/month.The Orne inlet shows deposition on both sides. The accretion on the updrift coast follows the building stages of the harbour of Caen-Ouistreham. On the downdrift coast, the deposition creates the Merville spit, which has several interlocked ridges. A perpendicular hook is present on the distal part of each ridge. This work shows that the swash bar attachment at the shoreline shapes a new ridge. Wave diffraction around the distal part of the swash bars and ridges, and the local wave directions, explain the formation of perpendicular hooks.
|
7 |
Pull-out of hooked end steel fibres : experimental and numerical studyMpanga-A-Kangaj, Christian January 2013 (has links)
Abstract
The reinforcement of concrete with steel fibres changes the failure of the composite material from catastrophic brittle failure to pseudo-ductile behaviour as a result of crack-bridging by the fibres, and the additional work which is absorbed by fibre pull-out. A good understanding of the properties of the fibre-reinforced concrete depends on an understanding of the fibre pull-out process. The main aim of the current study is to investigate, both experimentally and numerically, the pull-out behaviour of a single hooked end steel fibre from epoxy matrix, where epoxy was chosen to replace concrete in order to enable visualisation of the pull-out process. The experimental and numerical results both contribute to the development of a physical understanding of the mechanism of pull-out.
Experimental studies included the evaluation of the mechanical properties of hooked end steel fibre and epoxy matrix by means of tensile tests, the manufacturing of pull-out specimens consisting of a single hooked end steel fibre embedded in epoxy matrix, and the experimental characterisation of the fibre pull-out. The significant features (peaks and minima) of the load vs. displacement graph were correlated to stills taken from a video of the pull-out process, in which the plastic deformation of the fibre is evident. Small deformations (spalling) were also observed in the matrix. A model is proposed for the mechanisms which interact during the pull-out process. / Dissertation (MEng)--University of Pretoria, 2013. / gm2014 / Mechanical and Aeronautical Engineering / unrestricted
|
8 |
A computer-based justification for using the simple bend test as the basis for predicting the performance of steel hooked-end fibres in reinforced concreteBam, T.J. January 2019 (has links)
The classical test to confirm the performance of a given fibre design for use in reinforced concrete is the pull-out test. While attempts have been made to simulate the performance of such pull-out tests, in practice it has been found that there is a significant disparity between prediction and real-life performance.
The high strength of steel reinforcing fibres is a consequence of the cold wire drawing process and subsequent fabrication. Residual stresses exist in cold drawn wire as a consequence of the elastic response to a non-uniform distribution of plastic strain. This also introduces a yield strength profile where yield strength varies radially through the wire. The question arises as to whether fibre design should use a starting material model that considers these properties.
This thesis examines whether the tensile test, simple bend test and pull-out test provide enough information to define a starting material model that may be used for further design and simulation of such fibres.
Since the details of the wire drawing process and material specification are proprietary and therefore unknown, a sensitivity study was conducted to determine which aspects of the wire drawing process have the greatest effect on the pull-out curve and the following were established as being significant:
• Plastic strain due to wire drawing was shown to be the most important factor.
• The bilinear curve was shown to be a suitable approximation for the stress-strain curve.
• Replacing the plastic strain profile with a single value of average equivalent plastic strain is practical.
The following were established as having negligible effect:
• The consequences of the hooked-end forming process.
• The residual stress profiles due to wire drawing provided that the above was also excluded.
• The hardening law
While inverse analysis demonstrated that all tests provide sufficient information to determine the required properties for this bilinear material model, the pull-out test was shown to provide more accurate approximations of the maximum pull-out force at the first and second peaks and the bend test was shown to produce more accurate approximations of the energy associated with pull-out. Good correlation with the baseline pull-out curve was found for both the isotropic and the kinematic hardening laws and it is concluded that behaviour during pull-out is insensitive to the hardening law.
Sensitivity analysis and characterisation of the material model using an experimental pull-out curve demonstrated the importance of the coefficient of friction. Full characterisation using the pull-out curve therefore requires the solution to a three-variable problem: yield strength, tangent modulus and coefficient of friction. This was a suggested topic for further study. / Dissertation (MEng)--University of Pretoria, 2019. / Mechanical and Aeronautical Engineering / MEng (Mech) / Unrestricted
|
9 |
Shear Capacity of Fiber-Reinforced Concrete Under Pure ShearIshtewi, Ahmad M. January 2012 (has links)
No description available.
|
Page generated in 0.2586 seconds