This diploma thesis focuses on activities of the Silesian Autonomy Movement (RAŚ) on the platform on the Polish Parliament, while using theoretical concepts advocacy coalition and agenda setting. In the first part of my thesis, I will define goals of RAŚ and identify three most important ones, which will create the core of my research: Silesian language statute, minority statute of Silesians and problem of Upper Silesian autonomy. Then, I will define political subsystems, which reflect the three already mentioned main topics. Within each political subsystem, I will define two competing advocacy coalitions. In the next chapter I will analyse respective political subsystems and discussions, which is taking place among competing advocacy coalitions. I will stress the importance on the process of policy agenda setting. As a parameter of success I will seek for the existence of legislative proposals, proposed by advocacy coalitions. Then, I will analyse processes within respective political subsystems since 2005. In the final part of my thesis, I will strive to answer my research questions and compare the results with my hypotheses. Thanks to my research, I will be able to better understand activities of RAŚ, and of advocacy coalitions respectively, on national level.

The subject of this master’s thesis is to design the supporting steel structure covered pedestrian bridge between the learning area buildings A and D of the Faculty of Civil Engineering, street Veveří 95 in Brno. The construction is designed as a bridge rod spatial structure with two main girders. The girders are a combination Vierendeel girder and truss structure. The girders are connected at the level of the upper and lower band by a crosspiece. The horizontal stiffness of the upper and lower surface structure is ensured by bracing. The upper surface of the pedestrian bridge is horizontal in the longitudinal direction. The lower surface of the pedestrian bridge is curved in order to overcome the difference in height between buildings A and D. This solution is the result of comparison an evaluation of three alternative solutions.

The issue of the thesis is a construction of the Radejčín highway tunnel. Project contains all of the stages of construction. The total budget and time schedule were made for complete structure. The technological instruction was made for secondary lining of the tunnel. There is also a plan of security instruction, the list of risks on construction site, suggestion of fixed job contract, the plan of controlls and exams for making invert and upper vault of secondary lining. Another part is the project of construction site with three different drawing of construction sites and text part. The list of machines and devices is for the complete construction. It was added also a chosen construction details and evaluation of geotechnical monitoring.

Title: Effect of robot-assisted therapy on upper limb function in activities of daily living in patients after acquired brain injury Aims: The main aim of the thesis was to evaluate and compare the effectiveness of two therapeutic approaches using robot-assisted glove Gloreha Sinfonia to perform Activity of daily living in patients after acquired brain injury. Methods: The study is an empirical quantitative research, a monocentric randomized controlled, simply blinded study. The study compares two groups, group A (n = 20) used a robot-assisted Gloreha glove with a bimanual approach, group B (n = 20) had therapy with a robot-assisted Gloreha glove with an unimanual approach. All patients were evaluated for eligibility and underwent initial testing (T1). Patients in both groups had therapy (unimanual / bimanual) for three weeks (15x), retest (T2) was performed after completion of the intervention, and a follow-up evaluation was performed after 1 month (T3). Patients were always evaluated by the Upper Extremity Motor Activity Log (UE MAL), Motor Assessment Scale (MAS), Action Research Arm Test (ARAT), Box and Block test (BBT) and Motricity Index (MI). Results: According to the results of the MAS test in group A, there was a statistically significant improvement in upper limb function in category 8 at...

The diploma thesis deals with a statistical study of two books of protocols in the office of the vicar episcopal in Pelhřimov. They both cover the period from 1750 to 1831. It is focused on the time when Vincenc Josef Rubricius from Nová Cerekev was in the office of the vicar episcopal. In 1790 he became a vicar episcopal and stayed in his office for three decades until the time of his death in 1821. Thanks to his diligence and precision in maintaining the official agenda and the long-term work in the office of the vicar episopal, it was possible to perceive the studied time period as a coherent unit. Such a notation in the book of protocols was an evidence about the official acts. The statistical data about the number of the notations are described in the diploma thesis in 32 chapters, each of them for a particular year. It studies the number in the particular months, weeks as well as days. Due to this, it monitors the number of the official acts, e. g. with the consistory in České Budějovice, the other parish offices belonging to the vicariate, the Regional Authority in Tábor or the deanery in Pelhřimov. Even the visitations in particular parish offices were noted down into the books of protocols. Owing to these notations, it was possible to describe into details how the visitations were carried out during a particular year.

The technique of manufacturing of creamware and porcelain was discovered in Europe during the 18th century. The objects made from these materials document the social changes and the development of the dining culture, which both occured during the 18th century. At the end of that century classical culture became a fundamental inspirational source, which had been supported both by the discoveries of the ancient towns, Pompeii and Herculaneum, and by publishing books presenting ancient art. From the end of the 18th century the creamware and porcelain objects were started to be manufactured also in the Czech lands. In this master thesis I have studied, how the ancient influences were manifested in the products of the Czech and Moravian factories, from where they came and how they were transformed. The thesis does not cover all porcelain and creamware production, however it focuses on those factory where it was possible to detect ancient influences. The approach of the particular factories was strongly different. Czech porcelain factories took over ancient themes more likely from graphic patterns used in European workshops. The shapes derived from ancient pottery do not differ too much from the older and also contemporary European examples which were used as models. However, creamware objects tried, nesides the...

The content of this thesis is the description the various component of the linear feed axis, which are used in heavy duty machine tools. This describes their features, advantages and disadvantages and on these basics, are selected different appropriate design variants. In the second part of this thesis has been drawn up constructional design of these variants. They were subsequently compared and then was chosen the most ideal one for the designed machine, which is heavy machine tool upper gantry type. The work also includes the 3D CAD model of the final version and drawing documentation.

Disertační práce se zabývá syntézou a analýzou nových obvodových struktur neceločíselného (fraktálního) řádu s řiditelnými parametry. Hlavní cíl této práce je návrh nových řešení filtračních struktur fraktálního řádu v proudovém módu, emulátorů prvků fraktálního řádu a také oscilátorů. Práce obsahuje návrh tří emulátorů pasivního prvku fraktálního řádu, tři filtrační struktury a dva oscilátory navržené na základě využití pasivního prvku fraktálního řádu v jejich obvodové struktuře a dvě obecné koncepce filtrů fraktálního řádu založené na využití aproximace přenosové funkce fraktálního řádu. Na základě obecných koncepcí jsou v práci navrženy filtry fraktálního řádu typu dolní a horní propust. Díky aktivním prvkům s přeladitelnými parametry, které jsou užity v obvodových strukturách je zajištěna řiditelnost řádu filtru, jeho pólového kmitočtu a některých případech i činitele jakosti. Vlastnosti všech zapojení jsou ověřeny počítačovými simulacemi za pomoci behavioralních simulačních modelů aktivních prvků. Některé z uvedených obvodů byly realizovány na DPS a jejich vlastnosti ověřeny experimentálním měřením.

This thesis deals with concept of universal frequency filter by application of a switched-capacitor functional block. The concept is based on the theory of switched-capacitor circuits and the theory of a design of classical frequency filters. The printed circuit board was designed based on the filter connection developed by using a software Eagle. The filter was implemented as a laboratory product. This product has been revitalized and the frequency response of all types of filters has been measured. The measured parameters were compared with the parameters set out in the technical documentation of functional block.

This master’s thesis describes the design of the frequency filters by the help of the graph of the signal flows. There are defined by modern components like GVC (Generalized Voltage Conveyor), GCC (Generalized Current Conveyor), CF (Current Follower), DO-CF (Dual-Output Current Follower), OTA (Operational Transconductance Amplifier), BOTA (Ballanced Operational Transconductance Amplifier) and CFTA (Current Follower Transconductance Amplifier), the graphs of the signal flows, which describe their activity in the thesis. In the other part of the thesis is illustrated the procedure of the design of the frequency filters by the help of the graphs of the signal flows. For the concrete design was selected in the first case as the active component double output current follower and in the second case the CFTA. There are noted all designed circuits of the frequency filters also their characteristic equations in this thesis. The activity of the selected circuits was remitted to the analysis in the simulation program called PSpice. Because the active components, with which was engaged in the design of the filter which doesn’t exist in the real form, that is why the UCC, which is sufficing for attestation of the function of the circuit, was used for the simulation. The simulation was implemented in the frequency range 10 Hz to 10 MHz.