In this thesis, an approach is presented for the generation of grids suitable for the simulation of high Reynolds number viscous flows in complex three-dimensional geometries. The automatic and reliable generation of such grids is today on the biggest bottlenecks in the industrial CFD simulation environment. In the proposed approach, unstructured tetrahedral grids are employed for the regions far from the viscous boundaries of the domain, while semi-structured layers of high aspect ratio prismatic and hexahedral elements are used to provide the necessary grid resolution inside the boundary layers and normal to the viscous walls. The definition of the domain model is based on the STEP ISO standard and the topological information contained in the model is used for applying the hierarchical grid generation parameters defined by the user. An efficient, high-quality and robust algorithm is presented for the generation of the unstructured simplicial (triangular of tetrahedral) part of the grid. The algorithm is based on the Delaunay triangulation and the internal grid points are created following a centroid or frontal approach. For the surface grid generation, a hybrid approach is also proposed similar to the volume. Semi-structured grids are generated on the surface grid (both on the edges and faces of the domain) to improve the grid resolution around convex and concave ridges and corners, by aligning the grid elements in the directions of high solution gradients along the surface. A method is also developed for automatically setting the grid generation parameters related to the surface grid generation based on the curvature of the surface in order to obtain an accurate and smooth surface grid. Finally, a semi-structured prismatic/hexahedral grid generation algorithm is presented for the generation of the part of grid close to the viscous walls of the domain. The algorithm is further extended with improvements meant to increase the grid quality around concave and convex ridges of the domain, where the semi-structured grids are known to be inadequate. The combined methodology is demonstrated on a variety of complex examples mainly from the automotive and aeronautical industry.

In this thesis, gas-kinetic methods for inviscid and viscous flow simulations are developed. Initially, the finite volume gas-kinetic methods are investigated for 1-D flows as a preliminary study and are discussed in detail from theoretical and numerical points of view. The preliminary results show that the gas-kinetic methods do not produce any unphysical flow phenomena. Especially the Gas-Kinetic BGK method, which takes into account the particle collisions, predicts compressible flows accurately. The Gas-Kinetic BGK method is then extended for the solution of 2-D and 3-D inviscid and viscous flows on unstructured/hybrid grids. The computations are performed in parallel. Various inviscid and viscous test cases are considered and it is shown that the Gas-Kinetic BGK method predicts both inviscid and viscous flow fields accurately. The implementation of hybrid grids for viscous flows reduces the overall number of grid cells while enabling the resolution of boundary layers. The parallel computations significantly improve the computation time of the Gas-Kinetic BGK method which, in turn, enable the method for the computation of practical aerodynamic flow problems.

A set of algorithms building a program package for the generation of twoandthree-dimensional unstructured/hybrid grids around complex geometrieshas been developed. The unstructured part of the grid generator is based on the advancing frontalgorithm. Tetrahedra of variable size, as well as directionally stretched tetrahedracan be generated by specification of a proper background grid, initiallygenerated by a Delaunay algorithm. A marching layer prismatic grid generation algorithm has been developedfor the generation of grids for viscous flows. The algorithm is able to handleregions of narrow gaps, as well as concave regions. The body surface is describedby a triangular unstructured surface grid. The subsequent grid layers in theprismatic grid are marched away from the body by an algebraic procedurecombined with an optimization procedure, resulting in a semi-structured gridof prismatic cells. Adaptive computations using remeshing have been done with use of a gradientsensor. Several key-variables can be monitored simultaneously. The sensorindicates that only the key-variables with the largest gradients give a substantialcontribution to the sensor. The sensor gives directionally stretched grids. An algorithm for the surface definition of curved surfaces using a biharmonicequation has been developed. This representation of the surface canbe used both for projection of the new surface nodes in h-refinement, and theinitial generation of the surface grid. For unsteady flows an algorithm has been developed for the deformationof hybrid grids, based on the solution of the biharmonic equation for the deformationfield. The main advantage of the grid deformation algorithm is that itcan handle large deformations. It also produces a smooth deformation distributionfor cells which are very skewed or stretched. This is necessary in orderto handle the very thin cells in the prismatic layers. The algorithms have been applied to complex three-dimensional geometries,and the influence of the grid quality on the accuracy for a finite volumeflow solver has been studied for some simpler generic geometries. / QC 20100812

In this thesis, an approach is presented for the generation of grids suitable for the simulation of high Reynolds number viscous flows in complex three-dimensional geometries. The automatic and reliable generation of such grids is today on the biggest bottlenecks in the industrial CFD simulation environment.<p><p>In the proposed approach, unstructured tetrahedral grids are employed for the regions far from the viscous boundaries of the domain, while semi-structured layers of high aspect ratio prismatic and hexahedral elements are used to provide the necessary grid resolution inside the boundary layers and normal to the viscous walls. The definition of the domain model is based on the STEP ISO standard and the topological information contained in the model is used for applying the hierarchical grid generation parameters defined by the user. An efficient, high-quality and robust algorithm is presented for the generation of the unstructured simplicial (triangular of tetrahedral) part of the grid. The algorithm is based on the Delaunay triangulation and the internal grid points are created following a centroid or frontal approach. For the surface grid generation, a hybrid approach is also proposed similar to the volume.<p>Semi-structured grids are generated on the surface grid (both on the edges and faces of the domain) to improve the grid resolution around convex and concave ridges and corners, by aligning the grid elements in the directions of high solution gradients along the surface. A method is also developed for automatically setting the grid generation parameters related to the surface grid generation based on the curvature of the surface in order to obtain an accurate and smooth surface grid. Finally, a semi-structured prismatic/hexahedral grid generation algorithm is presented for the generation of the part of grid close to the viscous walls of the domain. The algorithm is further extended with improvements meant to increase the grid quality around concave and convex ridges of the domain, where the semi-structured grids are known to be inadequate.<p><p>The combined methodology is demonstrated on a variety of complex examples mainly from the automotive and aeronautical industry. / Doctorat en sciences appliquées / info:eu-repo/semantics/nonPublished

No description available.