No description available.

This dissertation deals with design of briquetting press of metal splinters. Dissertation reacts to non-complexity of solutions of present products. Goal is to raise the attractivity of the machine and related increase in awareness of this machine with ecological and economic benefits. Dissertation emphasizes preservation of functionality, consideration of ergonomics and safety of the machine.

Propose of this thesis is designing production technology of reducing part of tube. The production of requested part is designed on the base of calculations and simulation in one operation. This operation contains widening and squeezing. There is designed on the base of calculations a tool fixed in hydraulic press ZHW 40 for the production. To prepare a semi-product is used cutting by slitting saw.

The purpose of the diploma thesis is to design a manufacturing technology of the Brake Disk. The component is made of stainless steel 17 023 (X30Cr13). The blank is 2 mm thick sheet metal. Within the literary study the comparison of the possible technologies of manufacturing has been carried out. With respect to the batch size 200 000 pieces the fineblanking technology has been chosen. For the manufacturing has been chosen HFA 700 press. The major point of diploma thesis is to design a cutting tool and create a drawing documentation. The part of the project is the technical and economical evaluation of the designed manufacturing process.

No description available.

The master’s thesis is focused on the proposal of working part of the hydraulic circuit for the hydraulic press with a press force 400 kN. The thesis contains justifiable structural design of the linear hydraulic motor, which includes material choices, necessary calculations and simulations of material strength characteristics and the choice of the individual components. The thesis also includes a proposal of “heel valve” including the choice of individual components and basic function calculation of the hydraulic circuit of the hydraulic press.

Now-a-days, the major challenge that’s being faced by the concrete industry is the cleaning of concrete handling equipment. Concrete consists of aggregates, which harden with time, and the transportation of concrete mixture within the plant is a significant problem. This will not only increase the overall maintenance cost, but will lead to loss of raw materials, affect the rate of production, and reduce the lifetime of concrete handling equipment. The present study focuses on the design and implementation of an adaptive cleaning mechanism in the concrete industry and its importance in achieving efficient cleaning, which is tested to verify its performance in the Paver production plant. The goal of this study is to provide practical evidence about the importance of adaptive cleaning mechanisms for industrial applications. The first chapter gives a detailed introduction about pavers and the production process, the cause of material loss that occurs during transportation of wet concrete mixture inside a paver plant, and its effect on handling equipment and work environment. The second chapter explains design and working of the paver machine push bar mechanism, which can be implemented in a hydraulic press production process of pavers. The third chapter includes analysis and results of the mechanism obtained using Solidworks and Autodesk Inventor followed by observations that are achieved based on practical application of this mechanism in a paver production plant.

The project elaborated design of technology production of the extract - tray made of stainless steel 17 240. Based on literary study of deep drawing together with calculations, was designed drawing in instrument with holder. The drawing instrument make use of standardised components and it is solving forms to make up stand fitting to hydraulic press CYS 320, with nominal tensile force 3200 kN. Drawing punch and drawing die are produced from high alloyed steel 19 573 heat-worked according to drawing documentation.

The thesis handle design of part of anemostat in size of series 15000 pcs/year. Due to conus shape and dimensions of part was chosen out of quantity of manufacturing processes a technology of deep drawing without a thinnig of 1mm thick DC04 steel. The resulting solution is progressive tool which concatenate four operations of deep drawing process. The drawing tool make use of standardised components. The design contain progressive tool including drawing documentation. Hydraulic press CTH 400 with nominal force 4000 kN is used for mentioned procedure.

The diploma thesis of the master's study in the field of M2I-K presents a design of a hollow rotating part made of metal sheet with a tapering bottom. Deep drawing technology was chosen as the best suited option for production without thinning the wall. Stainless steel was chosen as a source material for production parts in compliance to ČSN 172 40. The drinker is produced by three drawing operations where each operation is performed separately on a standalone press CTH 250 developed by ŽĎAS a. s. A sheet measuring 1500 x 3000 x 1 mm with diameter 428 mm was evaluated as the most economically viable for production of a semi-finished product – rondel. For one year production produced in a series of annual volume 100,000 pieces.