The theme of this diploma thesis is fittings of heating systems and it is divided into three parts. The first part deals with this topic on theoretical level. In the second part, there is a calculations and drawings that deals with heating and water heating of the apartment building in Uherské Hradiště. This part is solved in two variants concerning hydraulic balancing and regulation of the heating system. The last part of the thesis is an experimental solution and processing of pressure loss results of selected valves. These results are compared with the values reported by the manufactures of the valve.

The theoretical part of the thesis is devoted to the issue thermal insulation plasters which can be applied in the remediation of buildings. The practical part deals with optimizing the composition of thermal insulation plaster-based lightweight aggregate of the foam glass and with possible substitution of cement for other binders with latent hydraulic properties. The resultant plaster should meet the best ratio of mechanical and thermal insulating properties.

The most important characteristics of each soil is its hydro-physical properties, which include retention curve. Retention curve expresses the relationship between humidity and pressure head. It is course affected by many factors such as grain size and mineralogical composition, humus content, structure and bulk density of dry soil. This thesis deals with direct and indirect determination of one of the basic hydraulic characteristics of the soil, soil moisture retention curve. For laboratory determination of moisture retention curves were used for sand tank and pressure instruments. Measured body retention curves were optimized RETC program.For indirect determination of retention curves were used Pedotransfer function by Wösten et . al .(1998 ) , derived from the European soils and under HYPRES Šútora and Štekauerová (2000). As in the project Wösten et al . (1998), PTF were processed for arable land in the area. The accuracy of both models PTF was assessed by the correlation coefficient R and standard error RMSE. Simple models PTF provide estimates of retention curves with sufficient accuracy for practical use in the locality.

This thesis deals with design of hydrostatic drive for multipurpose loader and tool carrier DAPPER. At the beginning is research of different basic concepts and modern solutions to the problem, aided by a detailed description of competitive machine in the same performance category. Extensive comparison with other producers is included in the annexes to this thesis. Furthermore, a theoretical driving characteristic and its appropriateness is examined further on the basis of two model situations. The calculations of the individual components of the hydraulic circuit precedes drive kinematics analysis of articulated machine frame, on it final conception of hydrostatic drive is chosen. Firstly hydromotors and hydogenerator are chosen on the grounds of calculations then hydraulic hoses, filters and flow divider. Next chapters are aimed to calculations of hydraulic losses and thermal calculation of hydraulic circuit. Final part deals with introduction the final characteristics of drive. The practical parts of the work are assembly drawings with main power components and hydraulic schematic of drive.

Diploma thesis is aimed on description of wastewater treatment plant with gravitational inflow. Focus is on WWTP in the Czech Republic, particularly in the South Moravia region - in this aspect the thesis presents relevant statistics like the number of WWTP per region and the total, capacity of WWTP per region and their substance load on inflow /outflow. The recherche is also limited according to the core subject of theoretical part, which is technology of small WWTP in the category up to 2000 equivalent habitants. The experimental part presents comparsion of particular wastewater treatment plant of this category in the South Moravia region: one with gravitational inflow and one with inflow pump station. The examined wastewater treatment plant are compared according to substance load, hydraulic load and technology. Thesis is concluded with a review of the different operation parameters of the both types of WWTP.

Farmland is being handled by various the tillage of soil especially for the correct course of soil processes, plant growth and development and of course profit. There are two types of the tillage of soil are their conventional (classical) which involves plowing and minimization tillage, where is excluded plowing. The last few decades, the development the tillage of soil focuses on minimization tillage. This includes loosing up small depth, soil conservation tillage and direct seeding. This thesis is aimed at impact of minimization tillage on selected physical and hydraulic properties of the soil. Sampling undisturbed soil samples was performed on the experimental plot Kozlany by Kopecky rollers (V = 100 cm3) from depth of 0 - 10 cm, during the year 2016. On this plot was used minimization tillage in the form loosing up small depth and direct seeding.

Diplomová práce je rozdělena na tří částí. První částí je analýza tématu, cílů a způsobů řešení, která obsahuje i teoretickou část. Druhá část je aplikace tématu na řešeném objektu včetně podrobného výpočtu a návrhu otopné soustavy, přípravy teplé vody, dvou variant alternativních zdrojů tepla a jejich porovnání, které vede k výběru lepšího zdroje tepla. Třetí část je projekt a obsahuje technickou zprávu vybrané varianty a projektovou dokumentaci, která obsahuje všechny potřebné výkresy.

This thesis deals with direct and indirect determination of soil hydraulic characteristics (retention curve and hydraulic conductivity) in the locality of Bohaté Málkovice. For laboratory determination of soil moisture retention curve is used sand tank and pressure relief device. For the indirect determination of soil hydraulic characteristics is used computer software Rosetta, which includes 5 models of pedotransfer functions. For estimatiton of retention curves are applied previously derived pedotransfer function (continuous parametric PTF and point PTF).

This thesis deals with handling equipment for handling containers 20 "and 40". Design of suspension frame with one telescopic beam is elaborated. In this work an analysis of the load on the device and the design calculation of the structure is elaborated. The suspension frame design with sliding, tilting and rotary positioning is designed to provide hydraulic elements. In the diploma thesis, the strength calculation of the selected construction node is processed and the necessary drawing documentation is created.