1 |
Production of biohydrogen in metabolically engineered Escherichia coli strainsMathews, Juanita January 2007 (has links)
Thesis (M.S.)--University of Hawaii at Manoa, 2007. / Includes bibliographical references (leaves 45-49). / v, 49 leaves, bound ill. 29 cm
|
2 |
Development of gas turbine combustor preliminary design methodologies and preliminary assessments of advanced low emission combustor conceptsKhandelwal, Bhupendra January 2012 (has links)
It is widely accepted that climate change is a very serious environmental concern. Levels of carbon dioxide (CO2) and other emissions in the global atmosphere have increased substantially since the industrial revolution and now increasing faster than ever before. There is a thought that this has already led to dangerous warming in the Earth’s atmosphere and relevant changes around. Emissions legislations are going to be stringent as the years will pass. Hydro carbon fuel cost is also increasing substantially; more over this is non- renewable source of energy. There is an urgent need for novel combustor technologies for reducing emission as well as exploring alternative renewable fuels without effecting combustor performance. Development of novel combustors needs comprehensive understanding of conventional combustors. The design and development of gas turbine combustors is a crucial but uncertain part of an engine development process. At present, the design process relies upon a wealth of experimental data and correlations. Some major engine manufacturers have addressed the above problem by developing computer programs based on tests and empirical data to assist combustor designers, but such programs are proprietary. There is a need of developing design methodologies for combustors which would lead to substantial contribution to knowledge in field of combustors. Developed design methodologies would be useful for researchers for preliminary design assessments of a gas turbine combustor. In this study, step by step design methodologies of dual annular radial and axial combustor, triple annular combustor and reverse flow combustor have been developed. Design methodologies developed could be used to carry out preliminary design along with performance analysis for conventional combustion chambers. In this study the author has also proposed and undertaken preliminary studies of some novel combustor concepts. A novel concept of a dilution zone less combustor has been proposed in this study. According to this concept dilution air would be introduced through nozzle guide vanes to provide an optimum temperature traverse for turbine blades. Preliminary study on novel dilution zone less combustor predicts that the length of this combustor would be shorter compared to conventional case, resulting in reduced weight, fuel burn and vibrations. Reduced fuel burn eventually leads to lower emissions. Another novel concept of combustor with hydrogen synthesis from kerosene reformation has been proposed and a preliminary studies has been undertaken in this work. Addition of hydrogen as an additive in gas turbine combustor shows large benefits to the performance of gas turbine engines in addition to reduction in NOx levels. The novel combustor would have two stages, combustion of ~5% of the hydrocarbon fuel would occur in the first stage at higher equivalence ratios in the presence of a catalyst, which would eventually lead to the formation of hydrogen rich flue gases. In the subsequent stage the hydrogen rich flue gases from the first stage would act as an additive to combustion of the hydrocarbon fuel. It has been preliminary estimated that the mixture of the hydrocarbon fuel and air could subsequently be burned at much lower equivalence ratios than conventional cases, giving better temperature profiles, flame stability limits and lower NOx emissions. The effect of different geometrical parameters on the performance of vortex controlled hybrid diffuser has also been studied. It has been predicted that vortex chamber in vortex controlled hybrid diffuser does not play any role in altering the performance of diffuser. The overall contribution to knowledge of this study is development of combustor preliminary design methodologies with different variants. The other contribution to knowledge is related to novel combustors with a capability to produce low emissions. Study on novel combustor and diffuser has yielded application of two patent applications with several other publications which has resulted in a contribution to knowledge. A list of research articles, two patents, awards and achievements are presented in Appendix C.
|
3 |
Development of gas turbine combustor preliminary design methodologies and preliminary assessments of advanced low emission combustor conceptsKhandelwal, Bhupendra 07 1900 (has links)
It is widely accepted that climate change is a very serious environmental
concern. Levels of carbon dioxide (CO2) and other emissions in the global
atmosphere have increased substantially since the industrial revolution and now
increasing faster than ever before. There is a thought that this has already led
to dangerous warming in the Earth’s atmosphere and relevant changes around.
Emissions legislations are going to be stringent as the years will pass. Hydro
carbon fuel cost is also increasing substantially; more over this is non-
renewable source of energy.
There is an urgent need for novel combustor technologies for reducing emission
as well as exploring alternative renewable fuels without effecting combustor
performance. Development of novel combustors needs comprehensive
understanding of conventional combustors. The design and development of gas
turbine combustors is a crucial but uncertain part of an engine development
process. At present, the design process relies upon a wealth of experimental
data and correlations. Some major engine manufacturers have addressed the
above problem by developing computer programs based on tests and empirical
data to assist combustor designers, but such programs are proprietary. There is
a need of developing design methodologies for combustors which would lead to
substantial contribution to knowledge in field of combustors. Developed design
methodologies would be useful for researchers for preliminary design
assessments of a gas turbine combustor.
In this study, step by step design methodologies of dual annular radial and axial
combustor, triple annular combustor and reverse flow combustor have been
developed. Design methodologies developed could be used to carry out
preliminary design along with performance analysis for conventional combustion
chambers. In this study the author has also proposed and undertaken
preliminary studies of some novel combustor concepts.
A novel concept of a dilution zone less combustor has been proposed in this
study. According to this concept dilution air would be introduced through nozzle
guide vanes to provide an optimum temperature traverse for turbine blades.
Preliminary study on novel dilution zone less combustor predicts that the length
of this combustor would be shorter compared to conventional case, resulting in
reduced weight, fuel burn and vibrations. Reduced fuel burn eventually leads to
lower emissions.
Another novel concept of combustor with hydrogen synthesis from kerosene
reformation has been proposed and a preliminary studies has been undertaken
in this work. Addition of hydrogen as an additive in gas turbine combustor
shows large benefits to the performance of gas turbine engines in addition to
reduction in NOx levels. The novel combustor would have two stages,
combustion of ~5% of the hydrocarbon fuel would occur in the first stage at
higher equivalence ratios in the presence of a catalyst, which would eventually
lead to the formation of hydrogen rich flue gases. In the subsequent stage the
hydrogen rich flue gases from the first stage would act as an additive to
combustion of the hydrocarbon fuel. It has been preliminary estimated that the
mixture of the hydrocarbon fuel and air could subsequently be burned at much
lower equivalence ratios than conventional cases, giving better temperature
profiles, flame stability limits and lower NOx emissions.
The effect of different geometrical parameters on the performance of vortex
controlled hybrid diffuser has also been studied. It has been predicted that
vortex chamber in vortex controlled hybrid diffuser does not play any role in
altering the performance of diffuser.
The overall contribution to knowledge of this study is development of combustor
preliminary design methodologies with different variants. The other contribution
to knowledge is related to novel combustors with a capability to produce low
emissions. Study on novel combustor and diffuser has yielded application of two
patent applications with several other publications which has resulted in a
contribution to knowledge. A list of research articles, two patents, awards and
achievements are presented in Appendix C.
|
4 |
Carbon dioxide-selective membranes and their applications in hydrogen processingZou, Jian. January 2007 (has links)
Thesis (Ph. D.)--Ohio State University, 2007. / Full text release at OhioLINK's ETD Center delayed at author's request
|
5 |
Genes of pyruvate catabolism and hydrogen synthesis in Clostridium thermocellum ATCC 27405Carere, Carlo R. 21 May 2008 (has links)
Clostridium thermocellum is a gram-positive, acetogenic, thermophilic, anaerobic bacterium that degrades cellulose and carries out mixed product fermentation, catabolising glucose to acetate, lactate, and ethanol under various growth conditions, with the concomitant release of H, and CO2. We have begun to investigate H2-production by C. thermocellum ATCC 27405 cultured in media containing different carbon sources, including glucose, cellobiose, crystalline cellulose, a-cellulose, paper, and delignified wood fibres. We have detected formate synthesis by C. thermocellum ATCC 27405 cultured on both cellobiose and a-cellulose. While formate synthesis has been reported for one strain of Clostridium thermocellum (strain I-1-B), numerous fermentation studies of C. thermocellum 27405 have failed to detect the presence of formate. Formate production was detected throughout growth, and pyruvate:formate lyase (PFL) enzyme activity was detected in late log and stationary phase in extracts of C. thermocellum cultured on cellobiose. Formate synthesis competes with the production of hydrogen (H2) as a fermentation end-product, and thus negatively impacts H2 yields. Bioinformatic analyses of the C. thermocellum genome identified genes encoding key enzymes in pyruvate catabolism pathways, including two putative lactate dehydrogenases (LDH), one PFL. four pyruvate:formate lyase activating enzymes, and at least three putative pyruvate:ferredoxin oxidoreductase (POR) or POR-like enzymes. Our data suggests that hydrogen may be generated through the action of either a Ferredoxin (Fd)-dependent NiFe hydrogenase, often referred to as "Energy-converting Hydrogenases" (Ech), or via NAD(P)H-dependent Fe-only hydrogenases which would permit H2 production from NADH generated during the glyeeraldehyde-3-phosphate dehydrogenase reaction. Furthermore, our findings show the presence of multiple genes putatively encoding NADH:Fd oxidoreductase; suggesting a possible mechanism in which electrons could be transferred from NADH to ferredoxin. The elucidation of pyruvate catabolism pathways and mechanisms of H2 synthesis is the first step in developing strategies to increase hydrogen yields from biomass. My studies have outlined the likely pathways leading to hydrogen synthesis in C, thermocellum ATCC 27405. The actual functional roles of these gene products during pyruvate catabolism and in H2 synthesis remain to be elucidated and will need to be confirmed using both expression analysis and protein characterization.
|
6 |
Genes of pyruvate catabolism and hydrogen synthesis in Clostridium thermocellum ATCC 27405Carere, Carlo R. 21 May 2008 (has links)
Clostridium thermocellum is a gram-positive, acetogenic, thermophilic, anaerobic bacterium that degrades cellulose and carries out mixed product fermentation, catabolising glucose to acetate, lactate, and ethanol under various growth conditions, with the concomitant release of H, and CO2. We have begun to investigate H2-production by C. thermocellum ATCC 27405 cultured in media containing different carbon sources, including glucose, cellobiose, crystalline cellulose, a-cellulose, paper, and delignified wood fibres. We have detected formate synthesis by C. thermocellum ATCC 27405 cultured on both cellobiose and a-cellulose. While formate synthesis has been reported for one strain of Clostridium thermocellum (strain I-1-B), numerous fermentation studies of C. thermocellum 27405 have failed to detect the presence of formate. Formate production was detected throughout growth, and pyruvate:formate lyase (PFL) enzyme activity was detected in late log and stationary phase in extracts of C. thermocellum cultured on cellobiose. Formate synthesis competes with the production of hydrogen (H2) as a fermentation end-product, and thus negatively impacts H2 yields. Bioinformatic analyses of the C. thermocellum genome identified genes encoding key enzymes in pyruvate catabolism pathways, including two putative lactate dehydrogenases (LDH), one PFL. four pyruvate:formate lyase activating enzymes, and at least three putative pyruvate:ferredoxin oxidoreductase (POR) or POR-like enzymes. Our data suggests that hydrogen may be generated through the action of either a Ferredoxin (Fd)-dependent NiFe hydrogenase, often referred to as "Energy-converting Hydrogenases" (Ech), or via NAD(P)H-dependent Fe-only hydrogenases which would permit H2 production from NADH generated during the glyeeraldehyde-3-phosphate dehydrogenase reaction. Furthermore, our findings show the presence of multiple genes putatively encoding NADH:Fd oxidoreductase; suggesting a possible mechanism in which electrons could be transferred from NADH to ferredoxin. The elucidation of pyruvate catabolism pathways and mechanisms of H2 synthesis is the first step in developing strategies to increase hydrogen yields from biomass. My studies have outlined the likely pathways leading to hydrogen synthesis in C, thermocellum ATCC 27405. The actual functional roles of these gene products during pyruvate catabolism and in H2 synthesis remain to be elucidated and will need to be confirmed using both expression analysis and protein characterization.
|
Page generated in 0.5262 seconds