Jitter and noise on package and printed circuit board interconnects are limiting factors in the performance of high speed digital channels. The simultaneous switching noise (SSN) induced by the return path discontinuities (RPDs) is a major source of noise and jitter on the signal interconnects of these channels. Therefore, optimal design of the power delivery network (PDN) is required to reduce SSN induced noise and jitter and improve the performance of high speed channels. The design of PDN is done in frequency domain whereas jitter and noise are time domain events. As a result, multiple iterations between frequency domain design of PDN and time domain analysis of noise and jitter are required before a design is taped out. A new methodology to correlate PDN impedance with jitter and voltage margin is presented in this thesis. Using this methodology, it would be possible to estimate jitter and noise from the PDN impedance and reduce the iterations involved in freezing the PDN design. The SSN induced at a given RPD is proportional to the PDN impedance at that RPD. As a result, the jitter and the noise can be correlated to the PDN impedance. The PDN impedance is a function of frequency and has alternate local minima and local maxima at resonances and anti-resonances respectively. The anti-resonances in the PDN impedance at the RPD cause significant increase in the insertion loss of signal whose return current is disrupted at that RPD. The increase in the insertion loss attenuates significant harmonics of the signal degrading its rise/fall times and voltage levels. This results in reduction of timing and voltage margins of the signal. Thus, based on the insertion loss profile and harmonic content of the signal, an estimate of jitter and noise on the signal can be made. Passive test vehicles consisting of microstrips with RPDs have been designed and fabricated to demonstrate the proof of concept through both simulations and measurements. Suitable placement of decoupling capacitors is suggested to reduce the PDN impedance below the target impedance and to minimize coupling between two noise ports on the PDN. Genetic algorithm to optimize the selection and placement of decoupling capacitors has been implemented. The efficacy of the algorithm has been demonstrated by testing it on a power delivery networks consisting of a simple power/ground plane pair.

Abstract There is a need in medicine and research for noninvasive, painless, safe and simple bed-side techniques to measure physiological processes associated with muscle function and activity. Bioelectrical Impedance Analysis (BIA) is a widely used, noninvasive, painless, safe and simple procedure for the measurement of body composition. However, although capable of producing accurate and reproducible data, it is known to be prone to movement artifacts. This poses the interesting question “Could impedance changes be used to monitor movement and, consequently, be related to muscle function or activity?” This project investigated the utility of impedance change as a monitoring technique for physiological processes that involve movement such as muscular contraction, the calf muscle pump, and swallowing. The impedance of leg muscle segments during locomotion, whilst riding a stationary exercise cycle, was measured at discrete frequencies and by bioimpedance spectroscopy to monitor muscle function or activity. Impedance traces were compared to information obtained by electromyography (EMG). Impedance, at a discrete frequency, was able to measure the cadence of cycling and its magnitude was related to the position of the pedal during the pedal cycle. When the cycling action was measured by bioimpedance spectroscopy, R0 and Zc showed a statistically significant difference, (p<0.05), between all angles of the pedal crank cycle while R∞ showed a statistically significant difference between angles in the lower hemisphere of the pedal crank cycle. The cyclical changes in impedance during cycling may be attributed to changes in shape and volume of the muscle during contraction as well as a volume change due to blood and lymph being pumped from the limb by the action of the calf muscle pump. Based on procedures used in the cycling studies, an impedance-based method for the measurement of calf muscle pump function during an exercise protocol, originally designed for use with air plethysmography, was developed. It was shown that impedance measured at 5 kHz provides a simple, non-invasive method for the measurement of the ejection fraction and ejection volume of the calf muscle pump as well as other haemodynamic variables. The impedance-based method was less technically challenging than accepted volumetric methods, such as air plethysmography and strain gauge plethysmography, and non-invasive c.f. ambulatory venous pressure, enabling it to be used repeatedly. Muscle function and activity is not confined to the legs so impedance changes in the arm and forearm during exercise were measured. Impedance measurements, at discrete frequencies and using bioimpedance spectroscopy, of the forearm during contractions of the hand were able to distinguish the difference between a ramp and a pulse contraction. When the impedance of the arm and forearm were plotted against the angle of the forearm to the horizontal during a bicep curl, there was an hysteresis effect. Impedance traces of a bicep curl were compared to an EMG trace of the same action. The larynx is a hollow muscular organ situated in the front of the neck above the trachea consisting of a framework of cartilages bound together by muscles and ligaments. The two major functions of the larynx are deglutition and phonation. Dysphagia, which is becoming more prevalent as the population ages, is defined as difficulty in swallowing thin liquids such as water or juices which splash into the trachea because the patient is unable to control the thin liquid bolus. Aspiration pneumonia and dehydration can be prevented by using thickened liquids which allow patients to achieve a safer swallowing response, but it is difficult to assess this response without interfering with the swallowing process. Impedance pharynography (IPG) is a technique using BIA to monitor an impedance waveform of the swallowing process that presents no radiation hazard to the patient, is non-invasive and does not require specialist trained personnel to operate it. Resistance changes across the neck were measured while subjects swallowed solutions of different viscosities. The resistance changes were distinctive and reproducible for each of the solutions of different viscosities which were swallowed. Measuring the function of the larynx by this method could be useful in the diagnosis and treatment of dysphagia. In conclusion, the studies described in this thesis demonstrate the potential usefulness of the measurement of change in impedance as a measure of muscle activity. Impedance-based methods can measure volume changes associated with changes in cross-sectional area of the muscles involved in contraction as well as compartmental fluid changes caused by the force of the contraction on the surrounding tissues including the vasculature. In particular, measuring the ejection fraction and other haemodynamic variables of the calf muscle pump by impedance has the potential to become the method of choice in the future because it is easy to use, inexpensive, non-invasive, safe, and hygenic. Measuring resistance changes across the neck during swallowing yields distinctive waveforms with features corresponding to the physiological phases of the swallowing process as well as identifying distinctive swallowing patterns associated with the different viscosities of liquids swallowed. Function of the larynx and the associated diseases of the larynx will potentially be easier to diagnose and treat with a safe, non-invasive, inexpensive, portable bed-side method of assessment such as BIA.

Abstract There is a need in medicine and research for noninvasive, painless, safe and simple bed-side techniques to measure physiological processes associated with muscle function and activity. Bioelectrical Impedance Analysis (BIA) is a widely used, noninvasive, painless, safe and simple procedure for the measurement of body composition. However, although capable of producing accurate and reproducible data, it is known to be prone to movement artifacts. This poses the interesting question “Could impedance changes be used to monitor movement and, consequently, be related to muscle function or activity?” This project investigated the utility of impedance change as a monitoring technique for physiological processes that involve movement such as muscular contraction, the calf muscle pump, and swallowing. The impedance of leg muscle segments during locomotion, whilst riding a stationary exercise cycle, was measured at discrete frequencies and by bioimpedance spectroscopy to monitor muscle function or activity. Impedance traces were compared to information obtained by electromyography (EMG). Impedance, at a discrete frequency, was able to measure the cadence of cycling and its magnitude was related to the position of the pedal during the pedal cycle. When the cycling action was measured by bioimpedance spectroscopy, R0 and Zc showed a statistically significant difference, (p<0.05), between all angles of the pedal crank cycle while R∞ showed a statistically significant difference between angles in the lower hemisphere of the pedal crank cycle. The cyclical changes in impedance during cycling may be attributed to changes in shape and volume of the muscle during contraction as well as a volume change due to blood and lymph being pumped from the limb by the action of the calf muscle pump. Based on procedures used in the cycling studies, an impedance-based method for the measurement of calf muscle pump function during an exercise protocol, originally designed for use with air plethysmography, was developed. It was shown that impedance measured at 5 kHz provides a simple, non-invasive method for the measurement of the ejection fraction and ejection volume of the calf muscle pump as well as other haemodynamic variables. The impedance-based method was less technically challenging than accepted volumetric methods, such as air plethysmography and strain gauge plethysmography, and non-invasive c.f. ambulatory venous pressure, enabling it to be used repeatedly. Muscle function and activity is not confined to the legs so impedance changes in the arm and forearm during exercise were measured. Impedance measurements, at discrete frequencies and using bioimpedance spectroscopy, of the forearm during contractions of the hand were able to distinguish the difference between a ramp and a pulse contraction. When the impedance of the arm and forearm were plotted against the angle of the forearm to the horizontal during a bicep curl, there was an hysteresis effect. Impedance traces of a bicep curl were compared to an EMG trace of the same action. The larynx is a hollow muscular organ situated in the front of the neck above the trachea consisting of a framework of cartilages bound together by muscles and ligaments. The two major functions of the larynx are deglutition and phonation. Dysphagia, which is becoming more prevalent as the population ages, is defined as difficulty in swallowing thin liquids such as water or juices which splash into the trachea because the patient is unable to control the thin liquid bolus. Aspiration pneumonia and dehydration can be prevented by using thickened liquids which allow patients to achieve a safer swallowing response, but it is difficult to assess this response without interfering with the swallowing process. Impedance pharynography (IPG) is a technique using BIA to monitor an impedance waveform of the swallowing process that presents no radiation hazard to the patient, is non-invasive and does not require specialist trained personnel to operate it. Resistance changes across the neck were measured while subjects swallowed solutions of different viscosities. The resistance changes were distinctive and reproducible for each of the solutions of different viscosities which were swallowed. Measuring the function of the larynx by this method could be useful in the diagnosis and treatment of dysphagia. In conclusion, the studies described in this thesis demonstrate the potential usefulness of the measurement of change in impedance as a measure of muscle activity. Impedance-based methods can measure volume changes associated with changes in cross-sectional area of the muscles involved in contraction as well as compartmental fluid changes caused by the force of the contraction on the surrounding tissues including the vasculature. In particular, measuring the ejection fraction and other haemodynamic variables of the calf muscle pump by impedance has the potential to become the method of choice in the future because it is easy to use, inexpensive, non-invasive, safe, and hygenic. Measuring resistance changes across the neck during swallowing yields distinctive waveforms with features corresponding to the physiological phases of the swallowing process as well as identifying distinctive swallowing patterns associated with the different viscosities of liquids swallowed. Function of the larynx and the associated diseases of the larynx will potentially be easier to diagnose and treat with a safe, non-invasive, inexpensive, portable bed-side method of assessment such as BIA.

Abstract There is a need in medicine and research for noninvasive, painless, safe and simple bed-side techniques to measure physiological processes associated with muscle function and activity. Bioelectrical Impedance Analysis (BIA) is a widely used, noninvasive, painless, safe and simple procedure for the measurement of body composition. However, although capable of producing accurate and reproducible data, it is known to be prone to movement artifacts. This poses the interesting question “Could impedance changes be used to monitor movement and, consequently, be related to muscle function or activity?” This project investigated the utility of impedance change as a monitoring technique for physiological processes that involve movement such as muscular contraction, the calf muscle pump, and swallowing. The impedance of leg muscle segments during locomotion, whilst riding a stationary exercise cycle, was measured at discrete frequencies and by bioimpedance spectroscopy to monitor muscle function or activity. Impedance traces were compared to information obtained by electromyography (EMG). Impedance, at a discrete frequency, was able to measure the cadence of cycling and its magnitude was related to the position of the pedal during the pedal cycle. When the cycling action was measured by bioimpedance spectroscopy, R0 and Zc showed a statistically significant difference, (p<0.05), between all angles of the pedal crank cycle while R∞ showed a statistically significant difference between angles in the lower hemisphere of the pedal crank cycle. The cyclical changes in impedance during cycling may be attributed to changes in shape and volume of the muscle during contraction as well as a volume change due to blood and lymph being pumped from the limb by the action of the calf muscle pump. Based on procedures used in the cycling studies, an impedance-based method for the measurement of calf muscle pump function during an exercise protocol, originally designed for use with air plethysmography, was developed. It was shown that impedance measured at 5 kHz provides a simple, non-invasive method for the measurement of the ejection fraction and ejection volume of the calf muscle pump as well as other haemodynamic variables. The impedance-based method was less technically challenging than accepted volumetric methods, such as air plethysmography and strain gauge plethysmography, and non-invasive c.f. ambulatory venous pressure, enabling it to be used repeatedly. Muscle function and activity is not confined to the legs so impedance changes in the arm and forearm during exercise were measured. Impedance measurements, at discrete frequencies and using bioimpedance spectroscopy, of the forearm during contractions of the hand were able to distinguish the difference between a ramp and a pulse contraction. When the impedance of the arm and forearm were plotted against the angle of the forearm to the horizontal during a bicep curl, there was an hysteresis effect. Impedance traces of a bicep curl were compared to an EMG trace of the same action. The larynx is a hollow muscular organ situated in the front of the neck above the trachea consisting of a framework of cartilages bound together by muscles and ligaments. The two major functions of the larynx are deglutition and phonation. Dysphagia, which is becoming more prevalent as the population ages, is defined as difficulty in swallowing thin liquids such as water or juices which splash into the trachea because the patient is unable to control the thin liquid bolus. Aspiration pneumonia and dehydration can be prevented by using thickened liquids which allow patients to achieve a safer swallowing response, but it is difficult to assess this response without interfering with the swallowing process. Impedance pharynography (IPG) is a technique using BIA to monitor an impedance waveform of the swallowing process that presents no radiation hazard to the patient, is non-invasive and does not require specialist trained personnel to operate it. Resistance changes across the neck were measured while subjects swallowed solutions of different viscosities. The resistance changes were distinctive and reproducible for each of the solutions of different viscosities which were swallowed. Measuring the function of the larynx by this method could be useful in the diagnosis and treatment of dysphagia. In conclusion, the studies described in this thesis demonstrate the potential usefulness of the measurement of change in impedance as a measure of muscle activity. Impedance-based methods can measure volume changes associated with changes in cross-sectional area of the muscles involved in contraction as well as compartmental fluid changes caused by the force of the contraction on the surrounding tissues including the vasculature. In particular, measuring the ejection fraction and other haemodynamic variables of the calf muscle pump by impedance has the potential to become the method of choice in the future because it is easy to use, inexpensive, non-invasive, safe, and hygenic. Measuring resistance changes across the neck during swallowing yields distinctive waveforms with features corresponding to the physiological phases of the swallowing process as well as identifying distinctive swallowing patterns associated with the different viscosities of liquids swallowed. Function of the larynx and the associated diseases of the larynx will potentially be easier to diagnose and treat with a safe, non-invasive, inexpensive, portable bed-side method of assessment such as BIA.

Thesis (Ph. D.)--University of Washington, 1999. / Vita. Includes bibliographical references (leaves 109-117).

Thesis--Lund Institute of Technology, 1994.

Thesis--Lund Institute of Technology, 1994.

Electrochemical impedance spectroscopy (EIS) is a powerful technique that can be applied in-situ to deconvolute the various loss mechanisms in the polymer electrolyte fuel cell (PEFC) that occur at different rates. The frequency response of a PEFC that results from EIS is in essence characterised by energy dissipating and energy storing elements of the cell. It can be represented by an equivalent circuit that is composed of resistors and capacitors respectively. By understanding the arrangement and magnitude of the electrical components in the equivalent electrical circuit, it is possible to generate a deeper understanding of how and where the electrical energy that is generated due to the redox reaction is being dissipated and retained within the real physical system. Although the use of equivalent circuits is often an adequate approach, some electrochemical processes are not adequately described by electrical components. In which case, it is necessary to adopt a more rigorous approach of describing processes through the use of differential equations to describe the physics of the electrochemical system at the frequency domain. Studies in the literature have attempted to construct mathematical models to describe the impedance response of the cathode catalyst layer (CCL) based on conservation equations describing the electrochemical and diffusion processes. However this has resulted in a complicated mathematical analysis which in turn results in complicated solutions. The resulting equations cannot be easily validated against real-world EIS measurements and only analytical results have been reported. In this thesis a mathematical model to describe the impedance response of the CCL has been developed. This model is derived from fundamental electrochemical theory describing the physics of the CCL. The mathematical treatment is simplified by taking into account some considerations based on the EIS theory. The resulting model can be easily applied to real-world EIS measurements of PEFCs and presents parameters commonly known in the electrochemical area. The scientific contribution of this doctoral thesis is mainly divided in two sections: Modelling and Application. The first step of the modelling section develops an equation describing charge conservation in the CCL and together with Ohm s Law equation accounting for ionic conduction, predicts the impedance response of the CCL at low currents. The second step includes the change of oxygen concentration during the oxygen reduction reaction (ORR) into the equation accounting for CCL low current operation. The study of mass transport in the CCL is very complex; the literature has treated it with simplifications and approximations. The finite diffusion distance for oxygen to reach the reaction sites in the CCL forms a complicated network of multi-phase parallel and serial paths and can change in dimension at different operating conditions (flooding, drying). In the mathematical treatment of this doctoral thesis the finite diffusion distance and surface concentration of oxygen in the CCL are considered to be independent of the thickness of the CCL. EIS reflects only bulk measurements based on the total CCL thickness. Even though this results in an over-simplification for the oxygen diffusion in the total CCL, this approach simplifies the mathematical treatment to predict the impedance response of the CCL at high current operation, and as result it can be successfully validated against real-world EIS measurements. In the application section the model is applied with real-world EIS measurements of PEFCs. First the model is applied with EIS measurements presenting inductive effects at high frequencies. The model reveals mechanisms masked at high frequencies of the impedance spectrum by inductance effects. The results demonstrate that the practice of using the real part of the Nyquist plot where the imaginary part is equal to zero to quantify the ohmic resistance in PEFCs can be subject to an erroneous interpretation due to inductive effects at high frequencies. Secondly the model is applied to cathode impedance data obtained through a three-electrode configuration in the measurement system and gives an insight into the mechanisms represented at low frequencies of the impedance complex-plot. The model predicts that the low frequency semicircle in PEFC measurements is attributed to low equilibrium oxygen concentration in the CCL-gas diffusion layer (GDL) interface and low diffusivity of oxygen through the CCL. In addition the model is applied with simultaneous EIS measurements in an Open-Cathode PEFC stack. The factors that limit the performance of the PEFC stack are evaluated with simultaneous EIS measurements and the model. The results show that the change in impedance response of individual cells within the stack is attributed to oxygen limitations, degradation in membrane electrode assemblies (MEAs) and temperature distribution. This EIS knowledge enables an assessment of the state of health in operational fuel cell stacks. In the last section of the application section, the mathematical model translated in the time domain via reverse Laplace Transform predicts the current distribution through the CCL. This provides information to improve the performance of the CCL as well as determine the uptake of product water in the membrane. Finally the conclusions and future work are presented. This doctoral thesis has established a backbone understanding of how the electrochemical and diffusion mechanisms relate to the electrochemical impedance spectra of PEFCs. The goal of a future work is to develop this EIS knowledge into a real-time EIS system for non-intrusive diagnostics of degradation in operational PEFCs. This implies a modification of the model to consider oxygen transport through the CCL thickness as part of a multi-species mixture using mass transport theory including concentrated solution theory to fuel cell engineering.

No description available.

No description available.