付記する学位プログラム名: 社会を駆動するプラットフォーム学卓越大学院プログラム / 京都大学 / 新制・課程博士 / 博士(情報学) / 甲第25441号 / 情博第879号 / 新制||情||147(附属図書館) / 京都大学大学院情報学研究科情報学専攻 / (主査)教授 原田 博司, 教授 佐藤 高史, 教授 林 和則 / 学位規則第4条第1項該当 / Doctor of Informatics / Kyoto University / DGAM

<p>A wireless revolution has occurred resulting in the formation of a proverbial backbone of wireless devices that our everyday functionality, productivity, and general way of life have become dependent. Consequently, victimizing an already constrained and finite wireless spectrum with further demands for increased bandwidths, greater channel capacities, and an insatiable plea for faster access rates. In-band full-duplexing (IBFD) is an innovative and encouraging technology that aims to answer this tacit mitigation call by bolstering spectral efficiency through simultaneous same frequency band transmission and reception. Conventionally, transceiver-based systems have their respective transmission and reception dictated by occurring in either disparate time slots (half-duplex) or distinct frequencies (out-of-band full-duplex). By achieving simultaneous same band communication, a theoretical doubling in spectral efficiency is rendered feasible. However, transmitter to receiver leakage, or self-interference (SI), remains the most barring frustration to IBFD realization. Being locally generated, SI is considerably stronger (often 50-100dB) than the desired signal-of-interest (SOI). Left unresolved, this unwanted energy saturates the receiver’s amplifiers and desensitizes its analog-to-digital converters. Thus, rendering the SOI unintelligible. Therefore, a means of self-interference cancellation (SIC) is necessitated to suppress any polluting SI to levels that of or below the receiver’s noise floor.</p><p></p>In this thesis an in-depth history of in-band full duplex technology is first presented, followed by a condensed examination of the SIC domains. Pertinent theory is presented pertaining to noise analysis and estimation relevant to a proposed IBFD transceiver architecture. Finally, a modelled simulation of this transceiver, developed in MATLAB, is presented. Subsequent results detailing an investigative study done on a fully adaptive tapped-branch analog self-interference canceller are shown. Said canceller’s variable phase and amplitude weights are set via real-time training using gradient descent algorithms. Evaluation of the results reveal marginal effect on the SIC efficacy due to transmission path nonlinearity and noise distortions alone. However, expansion of model consideration for conceivable cancellation hardware nonlinearities reveals an indirectly proportional degradation of SIC performance by up to 35dB as distortion levels vary from -80 dBm to -10 dBm. These results indicate consideration of such non-idealities should be an integral part of cancellation hardware design for the preclusion of any intrinsic cancellation impediments.

In-band full duplex is a new duplexing scheme that allows radio nodes to transmit and receive, utilizing the same frequency and time resources. The implementation of in-band full duplex was not feasible in practice, due to the effect of self-interference. But then, advances in signal processing made it possible to reduce this effect. However, the system level performance of in-band full duplex has not been investigated thoroughly.Through computer simulations, we investigate the performance of in-band full duplex, for indoor 5G small cell wireless networks. We examine the performance of in-band full duplex in comparison to dynamic and static time division duplexing. Additionally, we analyze the performance of the duplexing schemes with two interference mitigation techniques, namely beamforming and interference cancellation.Our results indicate that for highly utilized wireless networks, in-band full duplex should be combined with beamforming and interference cancellation, in order to achieve a performance gain over traditional duplexing schemes. Only then, in-band full duplex is considered advantageous, at any network utilization, and any downlink to uplink traffic demand proportion. Our results also suggest that in order to achieve a performance gain with in-band full duplex in both links, the transmit power of the access points should be comparable to the transmit power of the mobile stations. / Inomband hel duplex är en ny typ av duplexmetod som tillåter radionoder att sända och ta emot i samma frekvensoch tidsresurs. Att implementera inomband hel duplex har fram tills nu inte ansetts praktiskt genomförbart till följd av självstörningar. Framsteg inom signalbehandling har dock gjort det möjligt att begränsa denna självstörningseffekt. Emellertid har systemprestanda av inomband hel duplex inte undersökts tillräckligt noga i tidigare verk.Inomband hel duplex och dess prestanda för trådlösa 5G småcellsnätverk inomhus har studerats med hjälp av datasimuleringar och jämförts med dynamisk och statisk tidsdelning. Utöver detta har prestanda för de olika duplexmetoderna med avseende på två tekniker för störningsundertryckning, lobformning och störningseliminering, också undersökts.Våra resultat indikerar att för trådlösa nätverk med högt radioresursutnyttjande bör inomband hel duplex kombineras med lobformning och störningseliminering för att uppnå en prestandavinst jämfört med traditionella duplexmetoder. Bara då kan inomband hel duplex anses vara fördelaktig oberoende av radioresursutnyttjande och andelen upp- och nedlänkstrafik.Resultaten tyder också på att sändareffekten för radioaccesspunkterna bör vara jamförbar med den för mobilenheterna för att en prestandavinst med inomband hel duplex ska kunna uppnås. / Wireless networks, In-band full duplex, Static-time division duplexing, Dynamic-time division duplexing, Interference mitigation techniques, small cell, 5G, mmWave bands, Beamforming, Interference cancellation.