Thesis (doctoral)--University of Kuopio, 2008. / Includes bibliographical references. Also available on the World Wide Web.

Thesis (Ph.D.)--University of Alaska Fairbanks, 2007. / Adviser: Ron Johnson. Includes bibliographical references.

This thesis is designed to introduce beginning and experienced heating, ventilation and air conditioning (HVAC) engineers to common indoor air quality (IAQ) problems and solutions. The bulk of the work is a literature review of common pollutants, pollutant sources, HVAC equipment and systems, and remediation techniques. Pollutants covered include fungi, bacteria, dust mites, viruses, biofilms, microbiological volatile organic compounds (MVOC?s), volatile organic compounds (VOC?s), carbon dioxide, ozone, and radon. The HVAC systems covered are ventilation, direct expansion (DX), desiccant dehumidification, and system filters. The remediation techniques discussed are proper hygiene and maintenance, increased ventilation, humidity control, and proper selection of building materials.

No description available.

No description available.

<p>Swimming is the second most common form of recreational activity in the U.S. Swimming pool water and air quality should be maintained to allow swimmers, pool employees, and spectators to use the pool facility safely. One of the major concerns regarding the health of swimmers and other pool users is the formation of disinfection by-products (DBPs) in swimming pools. Previous research has shown that volatile DBPs can adversely affect the human respiratory system. DBPs are formed by reactions between chlorine and other compounds that are present in water, most of which are introduced by swimmers, including many that contain reduced nitrogen. Some of the DBPs formed in pools are volatile, and their transfer to the gas phase in pool facilities is promoted by mixing near the air/water interface, caused by swimming and pool features.</p> <p><a>Swimming pool water treatment processes can play significant roles in governing water and air quality.</a> Thus, it is reasonable to hypothesize that water and air quality in a swimming pool facility can be improved by renewing or enhancing one or more components of water treatment.</p> <p>The first phase of the study was designed to identify and quantify changes in water and air quality that are associated with changes in water treatment at a chlorinated indoor pool facility. Reductions of aqueous NCl₃concentration were observed following the use of secondary oxidizer with its activator. This inclusion also resulted in significant decreases in the concentrations of cyanogen chloride (CNCl) and dichloroacetonitrile (CNCHCl₂) in pool water. The concentration of urea, a compound that is common in swimming pools and that functions as an important precursor to NCl₃ formation, as well as a marker compound for introduction of contaminants by swimmers, was also reduced after the addition of activator.</p> <p>The second phase of this study involved field measurements to characterize and quantify the dynamic behavior of indoor air quality (IAQ) in indoor swimming pool facilities, particularly as related to volatile compounds that are transferred from swimming pool water to air. Measurements of water and air quality were conducted before, during, and after periods of heavy use at several indoor pool facilities. The results of a series of measurements at different swimming pool facilities allowed for examination of the effects of swimmers on liquid-phase DBPs and gas-phase NCl₃. Liquid-phase NCl₃ concentrations were observed to gradually increase during periods of high swimmer numbers (<i>e.g.</i>, swimming meets), while liquid-phase CHCl₃ concentration was nearly constant in the same period. Concentrations of urea displayed a steady increase each day during these periods of intensive use. In general, the highest urea concentrations were measured near the end of each swimming meet. </p> <p>Measurements of IAQ dynamics during phase 2 of the study demonstrated the effects of swimmers on the concentrations of gas-phase NCl₃and CO₂, especially during swimming meets. The measured gas-phase NCl₃ concentration often exceeded the suggested upper limits of 300 µg/m³ or 500 µg/m³during swimming meets, especially during and immediately after warm-up periods, when the largest numbers of swimmers were in the pool. Peak gas-phase NCl₃ concentrations were observed when large numbers of swimmers were present in the pools; measured gas-phase concentrations were as high as 1400 µg/m³.Concentrations of gas-phase NCl₃ rarely reached above 300 µg/m³ during regular hours of operation. Furthermore, the types of swimmers were shown to affect the transfer of volatile compounds, such as NCl₃, from water to airin pool facilities. In general, adult competition swimmers promoted more rapid transfer of these compounds than youth competition swimmers or adult recreational swimmers. The measured gas-phase CO₂ concentration often exceeded 1000 ppm_v during swimming meets, whereas the gas-phase CO₂ concentration during periods of non-use of the pool tended to be close to the background (ambient) CO₂ concentration or slightly more than 400 ppm_v. This phenomenon was largely attributed to the activity of swimmers (mixing of water and respiratory activity) and the normal respiratory activity of spectators. </p> <p>IAQ models for gas-phase NCl₃ and CO₂ were developed to relate the characteristics of the indoor pool environment to measurements of IAQ dynamics. Several assumptions were made to develop these models. Specifically, pool water and indoor air were assumed to be well-mixed. The reactions that were responsible for the formation and decay of the target compounds were neglected. Two-film theory was used to simulate the net mass-transfer rate of volatile compounds from the liquid phase to the gas phase. Advective transport into and out of the air space of the pool were accounted for. The IAQ model was able to simulate the dynamic behavior of gas-phase NCl₃ during regular operating hours. Predictions of gas-phase NCl₃ dynamics were generally less accurate during periods of intensive pool use; however, the model did yield predictions of behavior that were qualitatively correct. Strengths of the model include that it accounts for the factors that are believed to have the greatest influence on IAQ dynamics and is simple to use. Model weaknesses include that the model did not account liquid-phase reactions that are responsible for formation and decay of the target compounds. The IAQ model for NCl₃ dynamics could still be a useful tool to form the basis for recommendations regarding the design and operation of indoor pool facilities so as to optimize IAQ.</p><p>Measurements of CO₂ dynamics indicated qualitatively similar dynamic behavior as NCl₃. Because of this, it was hypothesized that CO₂ may represent a surrogate for NCl₃ for monitoring and control of IAQ dynamics. To examine this issue in more detail, a conceptually similar model of CO₂dynamics was developed and applied. The model was developed to allow for an assessment of the relative contributions of liquid®gas transfer and respiration by swimmers and spectators to CO₂ dynamics. The results of this modeling effort indicated that the similarity of CO₂ transfer behavior to NCl₃ may allow use of CO₂ as a surrogate during periods with few to no spectators in the pool; however, when large numbers of spectators are present, the behavior of CO₂ dynamics may not be representative of NCl₃ dynamics because of spectator respiration.</p><p></p> <br>

Commercial energy use in Arizona is different from the rest of the United States because of their high demand for air conditioning. Nearly half of the energy used in commercial buildings goes to heating, cooling, and ventilation. In an attempt to reduce overall every use in buildings, looking at these categories led to an examination of ventilation in buildings, which is the main cause for high heating and cooling costs. Ventilation of fresh air is required in order to provide a safe, healthy environment, with acceptable indoor air quality. Indoor air quality and pollution has continuously come to light as a major health concern for building occupants. Chemicals used in manufacturing allow consumers to buy and expose themselves to toxic substances such as volatile organic compounds on a daily basis. With minimal regulations on indoor air, it is important to find ways to better filter and clean it. The traditional solution is ventilation, but more fresh air ventilation means more heating and cooling. This paper explores the research that has been done on plants and phytoremediation and the applicability to indoor air quality. With the proof that certain combinations and amounts of plants can filter the air of volatile organic compounds, systems are explored for indoor air filtration instead of mechanical ventilation. This type of system can greatly reduce heating and cooling costs in buildings due to the reduction of outdoor air being brought in and requiring conditioning. A system of this type is a feasible solution to indoor air quality and can lead to a significant reduction in energy use. The proposed AIRMAPS is a system that in certain quantities can reduce the need for fresh air ventilation by 25%, which in turn has shown through the validation by eQUEST, that the energy used for heating, cooling, and ventilation fans can also be reduced by approximately the same amount. The plants used are spider plant, dumb cane, English ivy, and golden pothos. The average formaldehyde removal by each of these plants is a low approximation of 75% per cubic meter. This paper also considers the growing materials used for the plants; activated carbon, potting soil mix, and grow-stones, as well as their formaldehyde removal capabilities.

Thesis (MEng)--Stellenbosch University, 2015. / ENGLISH ABSTRACT: Increased awareness of environmental problems has awakened interest in renewable energy systems. Natural ventilation systems are especially of interest, as people spend most of their time indoors. Indoor air quality is an important consideration when human health and occupant comfort is to be maintained. This study focusses on determining the best inlet and outlet shape for a natural ventilation system from a chosen set of configurations. The inlet and outlet configurations were tested on a PDEC (Passive Downdraught Evaporative Cooling) shaft and solar chimney. The PDEC incorporated an evaporative cartridge made from cotton cloth. Independent models of the PDEC and solar chimney were built in a thermally controlled space where the configurations were tested at different wind speeds. The configurations were tested on a wet or dry PDEC shaft and on a hot or cold solar chimney. One-dimensional finite difference models, accounting for some two-dimensional effects in the evaporative cartridge, of the cartridge and solar chimney were developed. CFD (Computational Fluid Dynamics) models were further constructed in FLUENTr, simulating operating conditions for each inlet and outlet test. The CFD models were constructed to obtain numerical comparisons for the experimental data. The ability of the one-dimensional and CFD models to predict the performance of the PDEC and solar chimney were investigated. The results indicated that an inlet configuration called a TFI (Turbine Fan Inlet) performed the best at the tested wind speeds. The TFI was further able to significantly increase volumetric flow rate in the PDEC shaft for the dry evaporative cartridge tests. The outlet that performed best under the tests is a Windmaster Tornado Wind Turbine, or Whirlybird, which is a commercially available configuration. The one-dimensional models were not able to accurately predict conditions during start-up. The CFD models were highly accurate in predicting the experimental values. It is recommended that a two-dimensional theoretical model be developed to better predict start-up conditions. / AFRIKAANSE OPSOMMING: Verhoogde bewustheid van omgewings probleme het belangstelling in hernubare energie stelsels ontwaak. Natuurlike ventilasie stelsels is veral van belang, sedert mense die meeste van hul tyd binnenshuis spandeer. Binnenshuise lug kwaliteit is ’n belangrike oorweging wanneer menslike gesondheid en insittendes se gemak in stand gehou moet word. Hierdie studie fokus op die bepaling van die beste inlaat en uitlaat vorm van ’n gekose stel konfigurasies vir ’n natuurlike ventilasie-stelsel. Die inlaaten uitlaat-konfigurasies is op ’n PDEC (Passive Downdraught Evaporative Cooling) skag en sonkrag skoorsteen getoets. Die PDEC het ’n verdampings doek, gemaak van katoen, ingesluit. Onafhanklike modelle van die PDEC en sonkrag skoorsteen is in ’n termies-beheerde ruimte en die konfigurasies is by ’n onveranderende wind spoed getoets. Die konfigurasies is op ’n nat of droog PDEC skag en op ’n warm of koue son skoorsteen getoets. Een-dimensionele eindige verskil modelle, wat sommige twee-dimensionele effekte in ag neem in die verdampings doek, van die doek en sonkrag skoorsteen is ontwikkel. CFD (Computational Fluid Dynamics) modelle is verder gebou in FLUENTr, wat die werkstoestande vir elke inlaat en uitlaat toets simuleer. Die CFD modelle is ontwikkel om die eksperimentele data met numeriese waardes te vergelyk. Die vermoë van die een-dimensionele en CFD modelle om die verrigting van die PDEC en sonkrag skoorsteen te voorspel, is ondersoek. Die resultate dui daarop dat ’n inlaat opset genoem TFI (Turbine Fan Inlet) die beste vaar by die elke getoetsde wind spoed. Die TFI was verder in staat om die volumetriese vloeitempo in die PDEC skag aansienlik te verhoog vir die toetse met ’n droë verdamping doek. Die uitlaat wat die beste presteer het in die toetse is ’n Windmaster Tornado Wind Turbine, of Whirlybird, wat ’n kommersieel beskikbare konfigurasie is. Die een-dimensionele modelle was nie in staat om die toestande tydens die begin-fase akkuraat te voorspel nie. Die CFD modelle was hoogs akkuraat in die voorspelling van die eksperimentele waardes. Dit word aanbeveel dat ’n twee-dimensionele teoretiese model ontwikkel word om die toestande tydens begin-fase beter te voorspel.

Formaldehyde is one of the most prevalent and toxic chemicals found indoors, where we spend ~90% of our lives. Chronic exposure to formaldehyde indoors, therefore, is of particular concern, especially for sensitive populations like children and infants. Unfortunately, no effective filtration control strategy exists for its removal. While research has shown that proteins in sheep's wool bind permanently to formaldehyde, the extent of wool's formaldehyde removal efficiency and effective removal capacity when applied in active filtration settings is unknown. In this research, wool capacity experiments were designed using a plug flow reactor and air cleaner unit to explore the capacity of wool to remove formaldehyde given different active filtration designs. Using the measured wool capacity, filter life and annual costs were modeled in a typical 50 m₃ room for a variety of theoretical filter operation lengths, air exchange rates, and source concentrations. For each case, annual filtration costs were compared to the monetary benefits derived from wool resale and from the reduction in cancer rates for different population types using the DALYs human exposure metric. Wool filtration was observed to drop formaldehyde concentrations between 60-80%, although the effective wool removal capacity was highly dependent on the fluid mechanics of the filtration unit. The air cleaner setup yielded approximately six times greater capacity than the small-scale PFR designed to mimic active filtration (670 [mu]g versus 110 [mu]g HCHO removed per g of wool, respectively). The outcomes of these experiments suggest that kinematic variations resulting from different wool packing densities, air flow rates, and degree of mixing in the units influence the filtration efficiency and effective capacity of wool. The results of the cost--benefit analysis show that for the higher wool capacity conditions, cost-effectiveness is achieved by the majority of room cases when sensitive populations like children and infants are present. However, for the average population scenarios, filtration was rarely worthwhile, showing that adults benefit less from reductions in chronic formaldehyde exposure. These results suggest that implementation of active filtration would be the most beneficial and cost-effective in settings like schools, nurseries, and hospitals that have a high percentage of sensitive populations. / text

This study aimed to develop retrofitted natural ventilation options and control strategies for existing office buildings to improve thermal comfort, indoor air quality and energy consumption. For this purpose, a typical office building was selected in order to identify opportunities and constraints when implementing such strategies. Actual performance of the case study building was evaluated by conducting quantitative and qualitative field measurements including physical measurements and questionnaire surveys. Based on the actual building performance, a combination of Dynamic Thermal Simulation (using IES) and Computational Fluid Dynamics (using PHOENICS) models were built to develop appropriate natural ventilation options and control strategies to find a balance between energy consumption, indoor air quality, and thermal comfort. Several retrofitted options and control strategies were proposed and the best retrofitted natural ventilation options and control strategies were installed in the case study building. Post occupancy evaluation of the case study building after the interventions was also carried out by conducting physical measurements and questionnaire surveys. Post refurbishment measurements revealed that energy consumption and risk of overheating in the refurbished building were reduced by 9% and 80% respectively. The risk of unacceptable indoor air quality was also reduced by 60% in densely occupied zones of the building. The results of questionnaire surveys also revealed that the percentage of dissatisfied occupants reduced by 80% after intervention. Two new products including a Motorized ceiling tile and NVlogIQ , a natural ventilation wall controller, were also developed based on the results of this study.