Thesis (M.S.)--Oregon State University, 2004. / Printout. Includes bibliographical references (leaves 61-62). Also available on the World Wide Web.

This thesis is mainly composed of two parts. The first part is to introduce the planar transformer-based circuits and their applications. The mixed-mode S parameters and the grounding effects for planar transformers are discussed. A physical model has been developed for modeling the planar transformers. In the second part, a new coil winding technique for planar transformers has been presented to realize a high-efficiency planar transformer with arbitrary turn ratio for power-split/combine and phase-shift applications. Especially, the power-split/combine architecture based on a planar transformer of cellular shape is first presented in this thesis, enabling various kinds of passive components to be widely realized using the integrated passive device processes. As an example, this thesis proposes a design procedure for high-efficiency balun component. Firstly, design a high Q transformer that considers the load impedance effects. Secondly, design the ground reference for un-balanced signal on the virtual ground symmetry axis for balanced signals. Thirdly, design impedance matching networks for minimizing un-balanced and balanced port return losses. Then, a high performance planar transformer-based balun design can be done.

In this thesis, the study focuses on the antenna design for integrated passive devices. By using the substrate of piezoelectric material with high permittivity and introducing the fractal structures, the size reduction is obtained. Part of the research analyzes the influences of the surrounding environment on the antenna performances, including the effects of external formations, internal components, and interconnections. The results can provide the design rules for developing IPD antennas. The other part of the research emphasizes the design of IPD antenna itself, involving the investigations on the characteristics of substrate and fractals. The trade-off between compactness and radiation efficiency is pointed out, and then a design of modified ground plane is presented. When the modified design is placed on the system ground plane that exists in real system, the radiation efficiency can be improved significantly. Therefore, the concept of the compact IPD antenna is achieved.

In this thesis, the whole process of design a low pass filter (LPF) for the wireless communication application has been presented. Integrated passive device technology based on GaAs substrate has been utilized to make the LPF. Schematic simulation and electromagnetic simulations are extensively used in the design process. EM simulation is used in the selection of layout design and processing parameters for design optimization of both the inductors and IPD harmonic filters. The effective use of EM simulation enables us to realize the successful development of high performance harmonic filters. To make the optimization be more flexible and also for a deeper understanding of the optimization theory, optimization using genetic algorithm is also implemented. The weight of each targets are adjustable, and a non-uniformly distributed goal for the harmonic rejection range is introduced to achieve better optimization results. The embedded LPF is built and measurement results show good agreement with the simulation data. This kind of very compact, high performance harmonic filters can be used in radio transceiver front-end modules. The realized harmonic filters have insertion loss less than 0.6 dB and harmonic rejections greater than 25 dB with a compact die size of 0.8 mm2.

This thesis realizes miniature bandpass filters using integrated passive device technology. The bandpass filters are designed based on coupled resonator method with single-band and dual-band responses, using a transformer structure with high-density winging pattern. In addition, the designs adopt the electric- and magnetic-field cancellation and the feedback mechanism to produce transmission zeros in the filter responses for enhancing selectivity and stopband rejection. In order to satisfy the specific requirements of commercial bandpass filter products, this thesis designed and implemented a trisection filter with cross coupling on a low-loss RT/Duroid substrate to generate a transmission zero very near the passband.

This dissertation aims to design and implement wireless passive components using domestic integrated passive device (IPD) technology. The research focuses on exploiting novel 3-D structures for various kinds of IPD-based wireless passive components including high-quality and high-efficiency planar transformers, baluns, filters, and combiners to achieve miniature size and high performance. A physical model has been developed for modeling the planar transformers. In this dissertation, a scalable transformer model in integrated passive device technology is further used to correlate with the coupled-line sections of a conventional Marchand balun. This improves the efficiency of the design of planar transformers with equivalent coupled-line parameters such as the coupling factor, and even- and odd-mode characteristic impedances and quality factors. Additionally, the proposed model-based design approach provides effective optimization techniques that incorporate geometrical and material parameters. In addition, a compact transformer-based coupled balun bandpass filter design is proposed based on integrated circuit technology and the equivalent circuit is established. Using a planar transformer with high-density fully symmetrical wiring not only greatly reduces the component size but also provides a superior stopband rejection and selectivity. Finally, by using the spiral-shaped resonators, the dual-band third-order bandpass filter has been implemented on organic substrates. The proposed BPF design is verified to overcome the elements¡¦ parasitic effects, and thus can be miniaturized and optimized with high degree of freedom. The simulation and measurement results have good agreement for the proposed design in this dissertation.

This dissertation studies and implements highly miniaturized bandpass filter designs for wireless System-in-Package (SiP) applications. Based on the coupling matrix synthesis method, the external quality factors and coupling coefficients can be extracted by selecting the proper tapped-line feeding position and coupling spacing in geometrical configuration. Despite their high performance, most conventional microstrip bandpass filter designs require a bulky area for achieving, making them difficult to implement SiP applications. This dissertation first develops a stacked LC resonator and a stacked spiral resonator (SSR) in an embedded passive substrate (EPS) for realizing miniature single- and multi-band bandpass filters. Moreover, multiple transmission zeros created on both sides of each passband provide high stopband roll-off rates. The designed performance and size are comparable to those of low-temperature co-fired ceramic (LTCC) bandpass filters. As another conventional means of implementing RF passive components, the integrated passive device (IPD) process can produce large-value inductors and high-density capacitors, simultaneously. This dissertation fully utilizes the advantages of IPD technology to implement very compact bandpass filter designs with multiple transmission-zero frequencies at stopband by using a high-density wiring planar transformer configuration. Furthermore, due to the fully symmetric geometry, the transformer-coupled bandpass filter can be easily converted into a balun bandpass filter, capable of providing a superior balance performance with a significantly higher common mode rejection ratio (CMRR) level. The electromagnetic (EM) simulation results, as obtained by using Ansys-Ansoft HFSS, agree with the measurement results for all of the proposed designs in this dissertation.

Orientador: Luiz Carlos Kretly / Dissertação (mestrado) - Universidade Estadual de Campinas, Faculdade de Engenharia Eletrica e de Computação / Made available in DSpace on 2018-08-12T09:54:12Z (GMT). No. of bitstreams: 1 FonsecaJunior_PauloNazarenoLagoia.pdf: 5632530 bytes, checksum: ea9f82363483a872a3effe7dbd527b5f (MD5) Previous issue date: 2008 / Resumo: Este trabalho tem como finalidade a implementação de indutores integrados passivos baseados nas tecnologias de fabricação CMOS e BiCMOS. Os indutores são dispositivos fundamentais em aplicações de rádio freqüência e estão presentes na maioria dos circuitos de RF como amplificadores e osciladores. Os Indutores integrados passivos têm seus desempenhos degradados principalmente pelas perdas associadas ao metal e substrato. E apesar da existência de vários métodos de otimização, as foundries em geral, ainda oferecem um número reduzido de componentes, o que dificulta a escolha do melhor dispositivo para cada circuito. Sendo assim, a partir do projeto e implementação de indutores integrados o projetista é capaz de desenvolver novos dispositivos para cada aplicação. Este trabalho apresenta os resultados experimentais de indutores CMOS otimizados com a técnica de empilhamento para a redução de perdas ôhmicas e de PGS para a redução de perdas pelo substrato. Apresenta-se também indutores projetados na tecnologia BiCMOS com dupla camada de PGS; enterrada n+ e silício policristalino. / Abstract: This work aims the design and implementation of integrated passive inductors based on CMOS and BiCMOS processes. The inductors are essential devices in radio frequency applications and are used in many RF circuits such as amplifiers and oscillators. The inductors' performance is mainly limited by metal and substrate losses. Although various methods of improvement have been proposed, the foundries still offer a reduced number of components, making far more difficult to choose the best device for each circuit. In this way, from the design and implementation of integrated inductors, the designer is able to enhance and develop new devices for each application. This works presents the experimental results of inductors based on CMOS process. These inductors have been improved with two techniques; multilevel and PGS, the first one reduce the metal losses and the second to reduce the substrate losses. This work also shows inductors improved with double PGS based on BiCMOS process. The double PGS was designed with polysilicon and n+ buried layer. / Universidade Estadual de Campi / Telecomunicações e Telemática / Mestre em Engenharia Elétrica

Actuellement, les objets communicants sans fils occupent une place prépondérante. Pour faciliter leur utilisation, ces objets sont de plus en plus petits et nécessitent de très petites antennes. Cette miniaturisation d’antennes implique forcément une détérioration de leurs performances. La conception d’antennes électriquement petites (AEP) nécessite une très bonne compréhension théorique des mécanismes électromagnétiques mis en jeu notamment quelles limites précises peut-on atteindre pour une AEP étant circonscrive dans un volume donné. Un des paramètres essentiels d’une AEP est son facteur de qualité intrinsèque qui est inversement proportionnel à sa bande passante en impédance. Ainsi, maximiser la bande passante en impédance d’une antenne consiste à minimiser son facteur de qualité. Face à ce problème, de nombreux travaux ont été développés pour déterminer les limites possibles pour des AEP. C’est dans ce cadre que s’inscrit le premier axe de recherche de la thèse : étudier le facteur de qualité d’AEP, afin de déterminer s’il existe des dimensions optimales permettant de s’approcher de ces limites. Le second axe de recherche a consisté à étudier des AEP fonctionnant à 2,45 GHz pour des implants biomédicaux. Celles-ci sont imprimées sur de nouveaux types de substrat pour avoir une meilleure résolution de trace métallique favorisant une réduction de l’encombrement, et une intégration facilitant ainsi les interconnexions avec les frontaux RF. Le challenge consiste à maximiser les performances de ces antennes. Plusieurs prototypes ont été réalisés pour valider les simulations. / Currently, wireless devices play an important role in everyday life. For ease-of-use, these devices are becoming smaller and require very small antennas. However, the size reduction of these antennas necessarily implies a degradation of their performance. Consequently, the design of electrically small antennas (ESA) requires a very good theoretical understanding of the electromagnetic phenomenon that takes place, especially in terms of accurate performance that can be expected for an ESA with given dimensions. An important parameter of an ESA is its intrinsic quality factor since it is inversely proportional to its impedance bandwidth. Indeed, maximizing the matching bandwidth of an antenna consists in minimizing its quality factor. Facing this problem, many researches have been developed to determine the possible limits of the quality factor of ESA. The first research axis of this thesis is to study the quality factor of ESA to determine whether optimal dimensions exist to approach the fundamental quality factor limits. The second part of the thesis studies miniature antennas for biomedical implants operating at 2.45 GHz. These antennas are printed on a specific microelectronic substrate to ensure a better resolution in terms of metallic traces in order to reduce the size and allow easier integration to facilitate interconnections with RF front-end. The challenge consists in maximizing the performance of these antennas. The presented results are supported by means of electromagnetic models and simulations on one hand. Also, several prototypes are fabricated to validate these simulations.