This thesis explores the experiences of older adults with successful ageing and achieving ego integrity. It describes the sources related to ego integrity, that are helpful in facing the challenges of the eighth stage (ego integrity vs. despair). Five interviews were conducted with older adults, aged 65+. These interviews were subsequently analysed using interpretative phenomenological analysis (IPA). KEYWORDS ego integrity, aging, qualitative research, interpretative phenomenological analysis (IPA)

This dissertation thesis focuses on the evaluation of modern machine tools, especially tools for finishing operations, with which the effect of the passive force components on the machining process is evaluated. The thesis will examine the analysis of creating chips and circumstances that accompany this process and substantially involve the formation of a new surface. The analysis of the process of the recording of the power load of the MT3 tool takes place in the experimental part of the thesis. MT3 is a reaming head intended for finishing holes at high cutting speeds (100-200 m.min-1) with removal of small cross section AD (0.024 mm2) chips. Particular attention is paid to the newly created profile from the surface after machining and evaluation of changes in geometry and loading of the cutting edge, which is significantly reflected in the establishment and the development of passive forces.

This diploma thesis is dealing with social work theories and their usage in practice of social workers. Theoretical part describes their historical evolution until actual crisis of social work. Afterwards it is aimed on specific model, task centred approach. This approach has in Czech environment exceptional position, because it shows parallels with Act on social services and Standards of social services quality. Conclusion of theoretical part is dedicated to relationship between how social workers use in their practice social work theories and how this state is reflected in their professionality. Practical part is processed in form of qualitative research in which ten social workers took part. Through half structured interview were mapped if and which way social workers are using in their practice social work theories, and their experiences with task centred approach. Results of research, which are more closely elaborated within final discussion showed suppressed importance of theories. Social workers usually in their practice are not using specific theory (nor task centred approach), but they more rely on "their own theories" or internal rules of organization where they work.

The concept of personality rights and their protection, as well as the view on provision of health services has changed a lot. In relation to recent development in the field of private law there is a need to examine the aspects of personality rights separatelyy and also in broughter context. This Master's thesis sets as its goal to follow the current legislation and to point out situations where the personality rights can be especially endangered. The second goal is to evaluate current legal issues in foreign countries of the protection of personality rights in relation to the provision of health services in order to see if there is a probability that Czech law will have to deal with similar problems in the future as well. In the first part the concept of personality rights and their protection is introduced. The aspects related to the provision of health services that may be especially endangered are highlighted. Also the possibilities of resolving situations where there is infringement of personality rights are presented. The second part, which is also the most comprehensive of the thesis, deals with the specific institutes that help the protection of the personality rights in the field of health services. These include primarily informed consent, the way of providing it and the consequences of...

This dissertation deals with the issue of Supervisory boards in Czech state-owned enterprises. At first it defines a clear set of terms to differentiate within appropriate legal forms of state entrepreneurship applicable in Czech Republic. Thereafter it offers the analysis of implementing the nomination process recently brought to our governmental system. The empirical part of this thesis is constituted by the qualitative research of personal policy of the state in four selected stated-owned enterprises carried out for the period from 2006 till 2015. Education, working experience, political membership and personal integrity were the main focus areas while researching the members of selected supervisory boards.

The thesis deals with the assessment of security vulnerabilities. The aim of this work is to create a new method of vulnerability assessment, which will better prioritize critical vulnerabilities and reflect parameters that are not used in currently used methods. Firstly, it describes the common methods used to assess vulnerabilities and the parameters used in each method. The first described method is the Common Vulnerability Scoring System for which are described all three types of scores. The second analysed method is OWASP Risk Rating Methodology. The second part is devoted to the design of the own method, which aims to assess vulnerabilities that it is easier to identify those with high priority. The method is based on three groups of parameters. The first group describes the technical assessment of the vulnerability, the second is based on the requirements to ensure the confidentiality, integrity and availability of the asset and the third group of parameters evaluates the implemented security measures. All three groups of parameters are important for prioritization. Parameters describing the vulnerability are divided into permanent and up-to-date, where the most important up-to-date parameter are Threat Intelligence and easy of exploitation. The parameters of the impact on confidentiality, integrity and availability are linked to the priority of the asset, and to the evaluation of security measures, which increase the protection of confidentiality, integrity and availability. The priority of the asset and the quality of the countermeasures are assessed based on questionnaires, which are submitted to the owners of the examined assets as part of the vulnerability assessment. In the third part of the thesis, the method is compared with the currently widely used the Common Vulnerability Scoring System. The strengths of the proposed method are shown in several examples. The effectiveness of prioritization is based primarily on the priority of the asset and the security measures in place. The method was practically tested in a laboratory environment, where vulnerabilities were made on several different assets. These vulnerabilities were assessed using the proposed method, the priority of the asset and the quality of the measures were considered, and everything was included in the priority of vulnerability. This testing confirmed that the method more effectively prioritizes vulnerabilities that are easily exploitable, recently exploited by an attacker, and found on assets with minimal protection and higher priority.

This diploma thesis deals with the analysis of mechanical properties of bimetallic materials with clad layer of Inconel. In the theoretical part of the work there is an analysis of the investigated bimetallic material. The following is a description of mechanical tests and methods for evaluating the integrity of the surface, which were used to determine the properties of bimetallic material. The experimental part focuses on individual tests of mechanical properties of the material. For each test, the procedure for the production of test specimens, a description of the test equipment, the performance of the tests, the evaluation of the data obtained and finally, the evaluation of the results obtained are given.

The thesis deals with an evaluation of the surface texture of various materials, created by machining technologies (turning, milling and grinding). As for the theoretical part of the thesis, it contains a theoretical analysis of the effect of surface texture on friction, wear, coating and lubricating properties. The main emphasis is put on the analysis of the most frequently evaluated profile and surface parameters as well as their possible influence on the functional areas of machined parts. The experimental part includes evaluated and compared measured data based on the monitored parameters with benefits for machinery industry.

This master’s thesis deals with the design of six channel SD, HD and 3G HD-SDI digital video signal converter to 10-Gigabit Ethernet. In the introductory part, the conception of designed device is formulated. The theoretical background is provided in four chapters, where main standards and design rules related to digital electronics’ design are analyzed. The emphasis is placed on signal integrity at high-speed interconnects. There mostly practical examples, calculations and simulations are utilized. The design part contains thorough description of main subsystems’ design, implementation of FPGA, SDI input channels and 10-Gigabit Ethernet PHY. In the final part, the first tests and measurements of the build prototype are summarized. As an example, the comparison of signal integrity simulation to measurement is provided.

The diploma work deals with the evaluation of force load procedure problems when using reaming head MT3 depending on selected criteria of surface integrity of machined hole. It is possible to eliminate some unwanted elements when reaming by force load procedure analysis. These negative elements can influence both the tool e.g. its previous wear and the defect of a newly made hole.