1 |
Ion Temperature Anisotropies in the Venus Plasma EnvironmentBader, Alexander January 2017 (has links)
Velocity distributions are a key to understanding the interplay between particles and waves in a plasma. Any deviation from a Maxwellian distribution may be unstable and result in wave generation. Using data from the ion mass spectrometer IMA (Ion Mass Analyzer) and the magnetometer MAG on-board Venus Express, ion distributions in the plasma environment of Venus are studied. The focus lies on temperature anisotropy, that is, the difference between the ion temperature parallel and perpendicular to the background magnetic field. This study presents spatial maps of the average ratio between the perpendicular temperature <img src="http://www.diva-portal.org/cgi-bin/mimetex.cgi?T_%5Cperp" /> and parallel temperature <img src="http://www.diva-portal.org/cgi-bin/mimetex.cgi?T_%5Cparallel" />, both for proton and heavy ions (atomic oxygen, molecularoxygen and carbon dioxide). Furthermore average values of <img src="http://www.diva-portal.org/cgi-bin/mimetex.cgi?T_%5Cperp" /> and <img src="http://www.diva-portal.org/cgi-bin/mimetex.cgi?T_%5Cparallel" /> are calculated for different spatial areas around Venus. The results show that proton <img src="http://www.diva-portal.org/cgi-bin/mimetex.cgi?T_%5Cperp" /> and <img src="http://www.diva-portal.org/cgi-bin/mimetex.cgi?T_%5Cparallel" /> are nearly equal in the solar wind. At the bow shock and in the magnetosheath, the ratio <img src="http://www.diva-portal.org/cgi-bin/mimetex.cgi?T_%5Cperp/T_%5Cparallel" /> increases to provide conditions favoring mirror mode wave generation. An even higher anisotropy is found in the magnetotail with <img src="http://www.diva-portal.org/cgi-bin/mimetex.cgi?T_%5Cperp/T_%5Cparallel%5Capprox%202" /> for both protons and heavy ions.
|
2 |
The Field-Programmable Gate Array Design of the Gridded Retarding Ion Distribution SensorSwenson, Anthony P. 01 December 2017 (has links)
Mankind's ability to predict weather on earth has been greatly enhanced by new instrumentation technology. Similarly, mankind's ability to predict space weather benefits from new technologies. Just as increasing the amount of atmospheric measurements on earth heightened mankind's ability to predict Earth weather, many scientists expect that expanding the amount of plasma measurements in space could be key to enhancing mankind's ability to predict space weather. Small satellites are one of these new technologies that have the potential to greatly enhance our ability to predict space weather. Utilizing many low-cost small satellites allows scientists to take data from more locations than possible with a few high-cost large satellites.
Two instruments that have historic use measuring plasma are the Retarding Potential Analyzer and the Ion Drift Meter. Previous work has been done to combine the functionality from both of these instruments into one unit suitable for a small satellite in terms of size, power, and mass. An electrical and mechanical design has been completed to this end and this new instrument is called the Gridded Retarding Ion Distribution Sensor. This thesis describes the design and testing of the FPGA code that runs this new instrument.
|
3 |
Ellipsometrische Lichtstreuung als neue Methode zur Charakterisierung der Grenzfläche von KolloidenErbe, Andreas January 2004 (has links)
Die ellipsometrische Lichtstreuung wird als eine neue, leistungsfähige Methode zur Charakterisierung von Schichten um kolloidale Partikel vorgestellt. Theoretische Grundlage der Methode ist die Mie-Theorie der Lichtstreuung. Experimentell wurde die Polarisationsoptik eines Null-Ellipsometers in den Strahlengang eines Lichtstreuaufbaus eingebaut. Wie in der Reflexionsellipsometrie um den Brewsterwinkel herum erhält man in der ellipsometrischen Streuung einen Winkelbereich, in dem die Methode empfindlich auf Schichten an der Oberfläche der Partikel ist. An verschiedenen Systemen wurde die Tauglichkeit der ellipsometrischen Streuung zur Charakterisierung von Schichten auf Partikeln demonstriert. So wurden Dicke und Brechungsindex einer thermosensitiven Schicht von Poly(N-isopropylacrylamid) auf einem Poly(methylmethacrylat)-Kern bestimmt. Damit ist es möglich, experimentell den Schichtbrechungsindex und damit den Quellungsgrad zu bestimmen. Des Weiteren wurde der Einfluss der NaCl-Konzentration auf die Polyelektrolythülle von Poly(methylmethacrylat)-Poly(styrolsulfonat)-Blockcopolymer-Partikeln untersucht. Die Polyelektrolytketten liegen im hier untersuchten Beispiel nicht gestreckt vor. Als drittes wurde die Verteilung von niedermolekularen Ionen um elektrostatisch stabilisierte Poly(styrol)-Latexpartikel in Wasser untersucht. Hier wurde gezeigt, dass die beobachteten Schichtdicken und Schichtbrechungsindizes viel größer sind, als nach der klassischen Poisson-Boltzmann-Theorie zu erwarten ist. Des Weiteren wurde die Doppelbrechung von unilamellaren Lipidvesikeln bestimmt. Außerdem wurden Messungen der dynamische Lichtstreuung im Intensitätsminimum der Ellipsometrie durchgeführt. Dabei wird ein Prozess mit einer Korrelationszeit, die unabhängig vom Streuvektor, aber abhängig von der verwendeten Wellenlänge ist, sichtbar. Die Natur dieses Prozesses konnte hier nicht vollständig geklärt werden. / Ellipsometric light scattering is introduced as a new and powerful technique to characterize layers on colloidal particles. For the experiments, the polarization optics used reflection ellipsometry was installed in the beam of a light scattering setup. Using the priciples of null ellipsometry, a small range of scattering angles is obtained, were the method is sensitive to layers on the surface of colloidal particles. This is an analogy to the layer sensitivity of reflection ellipsometry at planer interfaces close to the Brewster angle. The theoretical basis for ellipsometric scattering is the Mie theory with its modern supplements. The feasibility of characterizing layers on colloidal particles was demonstrated with several systems. First, layer thickness and layer refractive index of poly(N-isopropylacrylamide) layers on a poly(methylmethacrylate) core were determined. This was the first time that the refractive index and with that the degree of swelling of a layer was directly determined in an scattering experiment. Second, polyelectrolyte layers on Poly(methylmethacrylate)-Poly(styrenesulfonate)-blockcopolymer particles were characterized. The influence of the salt concentration on the parameters of the layer was determined. The results show that the polyelectrolyte chains in the system investigated are not streched. Third, layers of ions around electrostatically-stabilized poly(styrene) particles were characterized. The layer thickness and layer refractive index in these examples are shown to be much larger than predicted by the classical Poisson-Boltzmann-theory. In addition, the birefringence of lipid vesicles was determined. Another interesting application of the ellipsometric scattering is the dynamic light scattering with ellipsometric optics. Its results show a characteristic process with a correlation time independent of the scattering vector, but wavelength dependent. The origin of this mode is not yet completely clarified.
|
4 |
Etude de la production d'ions négatifs sur des surfaces de carbone dans un plasma d'hydrogène sans Cs à basse pressionAhmad, Ahmad 22 November 2012 (has links)
Cette thèse porte sur l'étude de la production d'ions négatifs (INs) en surface pour des applications à la fusion contrôlée. Les INs formés en surface d'un échantillon dans un plasma d'hydrogène à partir de bombardement par les ions positifs sont collectés et analysés en énergie par un spectromètre de masse (SM). Les fonctions de distribution en énergie des INs (FDIs) que mesure le SM sont différentes de celles émises par la surface f(E, Θ) du fait des modifications de trajectoires et d'énergie induites par la traversée du plasma et du SM. Afin de déterminer la FDI émis par la surface f(E, Θ) en se servant des fonctions de distribution mesurée par le SM f''(E) nous avons développé un modèle qui calcule les trajectoires des ions entre la surface et le détecteur du SM. A partir d'une fonction test f(E,Θ) il est alors possible de calculer f''(E) et de comparer à l'expérience. L'élément critique de cette méthode est le choix de f (E, Θ). Le choix effectué dans cette thèse est la fonction de distribution des neutres calculée par le logiciel SRIM pour les particules pulvérisées et rétrodiffusées lors de bombardement d'une surface dans des conditions similaires aux conditions expérimentales. Les résultats du modèle montrent un bon accord entre les FDIs expérimentales et les fonctions calculées, et valident nos calculs et le choix de SRIM.Dans le but de comparer les mécanismes de production et les rendements des INs, une étude comparative a été réalisée sur différents matériaux carbonés. Les FDIs mesurées présentent la même forme à la température ambiante. / This thesis deals with negative ions (INs) surface production for applications in controlled fusion. Negative ions (NIs) formed at the sample surface from positive ions bombardment in hydrogen plasma are collected and analyzed with energy mass spectrometer (MS). The NI energy distribution functions (NIDF) measured by the MS are different from those emitted from surface f(E, Θ) due to modifications trajectories and energies which result when NI cross plasma and MS. In order to determine the NIDF emitted by the surface f(E,Θ) using the NIDF measured by MS f''(E), we developed a model that calculates the ion trajectories between the surface and MS detector. Then from a test function f(E,Θ) it is possible to calculate f''(E) and compare it to the experimental one. The critical issue is this method is the choice of f(E, Θ). The approach used in this thesis is the neutral backscattered and sputtered distribution function calculated by SRIM software during a surface bombardment similar to the experimental conditions. The model resulting show a good agreement between experimental and calculated NIDF, and validate our calculations and the choice of SRIM.In order to compare production mechanisms and NIs yields, a comparative study on different carbons materials was performed. Measured NIDFs show the same shape at room temperature. This indicates that the mechanisms involved in the NI production and the contribution of these mechanisms in the NIDF are the same for all materials. The best NI yield at low temperature is observed on DLC surface. The highest NI yield for all temperatures is observed on Boron doped diamond (BDD) surface at 400°C.
|
5 |
Physical chemical aspects of lanthanide-based nanoparticles: crystal structure, cation exchange, architecture, and ion distribution as well as their utilization as multifunctional nanoparticles.Dong, Cunhai 12 December 2011 (has links)
Lanthanide-based nanoparticles are of interest for optical displays, catalysis, telecommunication, bio-imaging, magnetic resonance imaging, multimodal imaging, etc. These applications are possible partly because the preparation of lanthanide-based nanoparticles has made tremendous progress. Now, nanoparticles are routinely being made with a good control over size, crystal phase and even shape. Despite the achievements, little attention is given to the fundamental physical chemistry aspects, such as crystal structure, architecture, cation exchange, etc. The results of the study on the crystal structures of LnF3 nanoparticles show that the middle GdF3 and EuF3 nanoparticles have two crystal phases, which has then been tuned by doping with La3+ ions. However, the required doping level is very different from the bulk. While the results for the bulk are well explained by thermodynamic calculations, kinetics is actually responsible for the results of the undoped and doped GdF3 and EuF3 nanoparticles. The attempt to make LnF3 core-shell nanoparticles led to the finding of cation exchange, a phenomenon that upon exposure of LnF3 nanoparticles to an aqueous solution containing Ln3+ ions, the Ln3+ ions in the nanoparticles are replaced by the Ln3+ ions in the solution. The consequence of the cation exchange is that LnF3 core-shell nanoparticles are unlikely to form in aqueous media using a core-shell synthesis procedure. It has also been verified that nanoparticles synthesized using an alloy procedure do not always have an alloy structure. This means that the core-shell and alloy structure of nanoparticles in the literature may not be true. The investigation of the architecture of nanoparticles synthesized in aqueous media is extended to those synthesized in organic media. The dopant ion distribution in NaGdF4 nanoparticles has been examined. It has been found that they don’t have the generally assumed statistical dopant distribution. Instead, they have a gradient structure with one type of Ln3+ ions more concentrated towards the center and the other type more concentrated towards the surface of the nanoparticles. With the understanding of these physical insights, lanthanide-based core-shell nanoparticles are prepared using the cation exchange. These core-shell nanoparticles containing a photoluminscent core and a paramagnetic shell are promising candidates for multimodal imaging. / Graduate
|
Page generated in 0.1244 seconds