This thesis is concerned with cutting farm machine and it consists of three parts. Theoretical part describes mechanism of chip formation, shape of the chips, temperature of the chips, technological variables describing chips, chip conveyor, chip crusher, briquetting press and coolant filter. In the next part there is proposal of design of cutting farm machine for production cell consists of six machining center. At last part there is design proposal and calculation of chip conveyor.

This thesis deals with alternative thermal degradation of electrical insulating liquids. The theoretical part describes the current state of the problem, electrical insulating liquids, their classification and types. There are described properties of electrical insulating liquids, their models of aging and diagnostic methods in accordance with the appropriate standards. In the practical part are chosen by representatives of alternative electrical insulating liquids and there are determined their dielectric characteristics in the initial state. According to the measured values is chosen five candidates for which it is designed and implemented an accelerated degradation test. During the test are measured dielectric parameters of the selected oils. Measured dependencies are mathematically approximated. In conclusion, the results are compared and physically interpreted in view of oxidation stability.

This diploma thesis deals with the evaluation of changes in properties of an antifreeze heat transfer liquids based on glycols used in real solar thermal system. Emphasis is placed on the use of non-toxic substances, which include propane-1,3-diol.

This diploma´s thesis is focused on a study of electrical and dielectric properties of gas sensors based on ionic liquids. Measurements were done on two different types of OECT substrates (0099 and 0160). Three ionic liquids and physiological solution PBS were chosen as electrolytes. Direct current current-voltage characteristic was measured. Switching rations of transistors with this electrolyte were determined by current-voltage characteristic. Alternating resistivity dependence on frequency were measured as well. Better properties showed OECT 0099 substrates.

In this diploma thesis, a method of routine analysis of commercial coolants was developed, focused on the simultaneous determination of inorganic anions - phosphates and borates - as corrosion inhibitors in fresh mixtures and the markers of recycling quality. The method was developed for the instrumental technique of capillary zone electrophoresis with indirect detection at 254 nm. The following were optimized: background electrolyte (its composition, concentration, pH), measured samples (coolant dilution, suitable internal standard) and measurement conditions (capillary length, sample dosing). The influence of the sample matrix on the measurement results, the robustness of the calibration line (or the agreement of the response with the actual analyte concentration) and also the repeatability of the method were tested. Optimizations and tests resulted in a method based on a standard addition with the following parameters: background electrolyte of pH = 11.50 containing sodium chromate at 10 mmol l-1 concentration and CTAB at 1 mmol l-1 concentration; dilution of the coolant sample 20-50×, addition of internal standard MES at 0,1 mmol l-1 concentration, electrokinetic sample injection at -5 kV for 10 s, capillary length 50.0 cm, inner diameter 75 μm. The repeatability of the method expressed as a...

This thesis concentrates on physically based simulation of fluids followed by its photorealistic visualization. It describes one form of Smooth Particle Hydrodynamics methods for viscoelastic fluid simulation and includes its extension for multiple interacting fluids. It also deals with SPH boundary problem and investigates its solution by fixed boundary particles. For visualization of fluids there is a method of Ray Tracing described in detail and it's extended with light absorption in transparent materials. In connection with this method there is also discussed a problem of infinite total reflections and some solution techniques are offered. To extract the surface of the fluid there is used a Marching cubes method and its discussed in terms of Ray Tracing.

This diploma thesis is focused on the study of electric and dielectric properties of transistors based on ionic liquids. The measurements were performed on organic electrochemical transistors with a semiconducting channel made of PEDOT:PSS, which were firstly prepared on ITO substrates, later they were printed using 3D print. Ionic liquid NO4 (1-butyl-3-methylimidazolium hydrogensulfate) was used for measuring of the properties. Electrical properties were determined by measuring volt-ampere characteristics, dielectric properties were measured by impedance spectroscopy.

The goal of this diploma thesis is to clarify possibilities of usage of acoustic emission as a hydraulic machinery diagnostics tool. Especially for exposing presence of ruptures or cracks in the parts of machine, assuming changes in acoustic exposure of the part during operation. This clarification is based on series of simple measured experiments, which consist of monitoring the bolt placed in fluid stream inside of a pipe. This bolt was preloaded against inner wall of pipe by appropriate tightening torque. This preload is supposed to simulate effects of the size of rupture. High preload simulates small rupture or none in object and respectively small preload is supposed to simulate big rupture. A group of pressure sensors and accelerometers measures experiments and their evaluations are processed by script created in software MATLAB. Outputs of this script are charts with effective values of respective sensors from the entire record split into individual frequency spectrums. These charts compare spectrums of each configuration to judge effects of parameters changes.

One of the objectives of the master´s thesis is to summarize types of most used check valves and their constructions. These check valves have specific static and dynamic properties. One of dynamic properties is vibration of closing member of lift check valve. Due to these vibrations, the added effects of fluid may result. This thesis deals with explanation and computation of these added effects.

This graduate thesis is focused on measuring the electrical conductivity of the gel polymeric electrolytes, their preparation and deals with the changes of the performance ratio of the individual substances in gel electrolyte The theoretical part deals with electrochemistry, gel electrolytes, the conductivity of electrolytes, gel electrolytes preparation, methods used to evaluate the measured results and on the properties of the ionic liquids. In the practical part is summarized the process of preparing gel electrolytes, the chemicals to prepare the gels with ionic liquids. The results are evaluated by using impedance technique and linear voltammetry, there are calculated the values of the electrical conductivity of the electrolyte and potential windows.