&amp / #728 / G Sniffing is computer-network equivalent of telephone tapping. A Sniffer is simply any software tool used for sniffing. Needs of modern networks today are much more than a sniffer can meet, because of high network traffic and load. Some efforts are shown to overcome this problem. Although successful approaches exist, problem is not completely solved. Efforts mainly includes producing faster hardware, modifying NICs (Network Interface Card), modifying kernel, or some combinations of them. Most efforts are either costly or no know-how exists. In this thesis, problem is attacked via modifying kernel and NIC with aim of transferring the data captured from the network to the application as fast as possible. Snort [1], running on Linux, is used as a case study for performance comparison with the original system. A significant amount of decrease in packet lost ratios is observed at resultant system.

It is the purpose of this thesis to investigate different regional geoid determination methods with respect to their feasibility for use with a future GOCE satellite-only Earth Gravity Model (EGM). This includes investigations of various techniques, which involve different approximations, as well as the expected accuracy. Many, but not all, of these tasks are tested by means of Synthetic Earth Gravity Models (SEGMs). The study is limited to remove-compute-restore methods using Helmert condensation and to Sjöberg's combined approach (method with additive corrections). First, a number of modifications of Stokes' formula are tested with respect to their compatibility with a GOCE EGM having negligible commission error. It is concluded that the least squares modification method should be preferred. Next, two new point-mass SEGMs are constructed in such a way that the resulting models have degree variances representative for the full and topographically reduced gravity fields, respectively. These SEGMs are then used to test different methods for modified Stokes' integration and downward continuation. It is concluded that the combined method requires dense observations, obtained from the given surface anomalies by interpolation using a reduction for all known density anomalies, most notably the topography. Examples of other conclusions are that the downward continuation method of Sjöberg (2003a) performs well numerically. To be able to test topographic corrections, another SEGM is constructed starting from the reduced point-mass model, to which the topography, bathymetry and isostatic compensation are added. This model, which is called the Nordic SEGM, is then applied to test one strict and one more approximate approach to Helmert's condensation. One conclusion here is that Helmert's 1st method with the condensation layer 21 km below sea level should be preferred to Helmert's 2nd condensation strategy. The thesis ends with a number of investigations of Sjöberg's combined approach to geoid determination, which include tests using the Nordic SEGM. It is concluded that the method works well in practice for a region like Scandinavia. It is finally shown how the combined strategy may preferably be used to estimate height anomalies directly.

<p>It is the purpose of this thesis to investigate different regional geoid determination methods with respect to their feasibility for use with a future GOCE satellite-only Earth Gravity Model (EGM). This includes investigations of various techniques, which involve different approximations, as well as the expected accuracy. Many, but not all, of these tasks are tested by means of Synthetic Earth Gravity Models (SEGMs). The study is limited to remove-compute-restore methods using Helmert condensation and to Sjöberg's combined approach (method with additive corrections).</p><p>First, a number of modifications of Stokes' formula are tested with respect to their compatibility with a GOCE EGM having negligible commission error. It is concluded that the least squares modification method should be preferred.</p><p>Next, two new point-mass SEGMs are constructed in such a way that the resulting models have degree variances representative for the full and topographically reduced gravity fields, respectively. These SEGMs are then used to test different methods for modified Stokes' integration and downward continuation. It is concluded that the combined method requires dense observations, obtained from the given surface anomalies by interpolation using a reduction for all known density anomalies, most notably the topography. Examples of other conclusions are that the downward continuation method of Sjöberg (2003a) performs well numerically.</p><p>To be able to test topographic corrections, another SEGM is constructed starting from the reduced point-mass model, to which the topography, bathymetry and isostatic compensation are added. This model, which is called the Nordic SEGM, is then applied to test one strict and one more approximate approach to Helmert's condensation. One conclusion here is that Helmert's 1st method with the condensation layer 21 km below sea level should be preferred to Helmert's 2nd condensation strategy.</p><p>The thesis ends with a number of investigations of Sjöberg's combined approach to geoid determination, which include tests using the Nordic SEGM. It is concluded that the method works well in practice for a region like Scandinavia. It is finally shown how the combined strategy may preferably be used to estimate height anomalies directly.</p>