Aim diploma thesis is design and dimensioning central air - conditioning system of offices in industrial object. To air - conditioning was choose 2nd floor office building. Introduction is devoted short entrance to the areas air - conditioning and survey used air - conditioner systems inclusive basic types and possibility using single air - conditioning system practically. Follows computational part, in which is effected heat loss calculation, summer heat gains air - conditioned object and psychrometr calculation summer and winter operationing air - conditioning system. After calculation needed parameters is effected design distribution air, machine - room air conditioning, dimensioning air channels and ventilators, design incoming and off-take anemostats and their regulations. Next part includes calculation power consumption during the operationing designed air - conditioning system.

RIEGER, L.: Air conditioning of offices in administrative building The main contents of the thesis completed in the master's programme of the field M-TEP is to make a design of air-conditioning system of the offices on one floor of the office building, using dispositions according to the provided documentation. The theoretical part which deals with air-conditioning systems, devices and their constituent parts is followed by calculation chapters in which object properties are defined as heat loss, heat gain and the need for ventilation air. A proposal of air-conditioning system comprising psychrometric calculations, dimensioning of air distribution sizing, design of machine room and air-conditioner itself follows. The computational solution is supplemented by drawing documentation and specification of materials.

The purpose of this thesis is to evaluate the air-conditioning and ventilation system in special circumstances of clean operations of a microbiological laboratory in connection with technological equipment and operational procedures of such environment. The chapter Equipment and Operational Conditions in Microbiological Laboratory states the requirements of clean room and its principal equipment. As an example, a specific microbiological laboratory is provided. The chapter Air-conditioning and Ventilation Systems for Clean Operations provides a description of principal elements of a ventilation system based on specific solution of microbiological laboratory. The chapter Calculation of Ventilation Elements provides calculations of elements of air-conditioning unit with regards to standing microbiological laboratory equipment. The chapter Measuring the Parameters of Clean Room deals with measurement methodology and also provides measurement data of a specific clean room. The chapter Operational Costs of Ventilation System of a Clean Room states the yearly operational costs of a specific microbiological laboratory. The chapter Operational Procedures for Safeguarding the Required Parameters deals with operations and maintenance of clean room and its ventilation and air-conditioning system.

The objective of my thesis was to suggest and size the equipment for a hotel kitchen air-conditioning according to the given parameters. This thesis deals with the calculation of the amount of circulating air, heat loss and profit and the psychometric calculation for summer and winter operation. It also contains the design of air channels, terminal components, air-conditioning unit and ventilation of machine room. Furthermore, it comprises of the suggestion of measurement system and regulation, estimation of energy demand, technical report and list of material items. The calculation is equipped with drawing documentation.

This thesis describes the design and dimensioning of a device for air conditioning in kitchen and dispensing room in the administrative building according to the given parameters. The thesis begins with a calculation part that contains the determination of ventilation air, the calculation of heat losses and heat load of the object. In addition, here are psychrometrics calculations of air-conditioning device for summer and winter operation. The following is part of the design, which includes design of terminal components, design and sizing ductwork and the design and location of air-conditioning unit. The thesis includes a technical report, list of used materials and drawing documentation.

The diploma thesis deals with the cleaning of car air conditioning system with ozone. The aim is to design equipment for ozone production, its location and cleaning algorithm. The thesis is divided into two parts. The introductory theoretical part describes the principle of operation of conventional automotive air conditioning, then discusses the methods of pollution and solutions to remove these pollutions. The theoretical part ends with a summary of information on ozone. The practical part is continuously followed by the design of device for the ozone production directly in the car. The final part deals with the location of such a device in a car, measuring its parameters and evaluating the results.

The diploma thesis is consisting of three parts. The first part is a theoretical overview. It discusses the basic types of refrigeration systems and addresses used by air conditioners. The theoretical part contains describes the basic terms of the proposed refrigeration system, air filtration technology. In the second part of the project design air conditioning systems for offices three-story office building. Following heat balance the budget, the air conditioning system. Numerical solution is completed drawings and bill of material. The third part is experimental. Objective measurement is to determine the heat loss of the pipe without insulation, with normal insulation, new insulation and determine the applicability of a new type of insulation.

Diploma thesis is focused on the design of restaurant's air-condition system for 60 persons as well as air-condition system for adjacent kitchen. The work consists of an introduction to the problematic of air-condition systems and its arrangement in the project. Diploma thesis consists of two parts - computational and design. Computational part includes computations of a quantity of an aeration air, calculation of thermal losses, stress and psychrometric evaluation of operation during summer and winter. Design part consists of designing of location and slot diffuser dimensioning, design of air conduct paths, its dimensioning and calculation of pressure losses. This work also includes designing of ventilation of machine-room, selection of air-condition units and its measurement and regulation. Drawing documentation and material specifications are also part of this diploma thesis.

The aim of this diploma thesis is to design and suggest dimensions of air conditioners for ballroom and ventilation of cafeteria, cloakrooms and sanitary rooms. Sub-goals are next heat-load calculation of air-conditioned space, psychrometric calculations for summer and winter environment conditions, design of air distribution, machinery room of air conditioning, to design and suggest dimensions of air distribution system, specification of materials and design of necessary technical drawings.

The diploma thesis is consisting of two parts. Forepart is a theoretic survey. It construes basic office of the air conditioning and deal with used air conditioner arrangements. More deeply it deals with air conditioner systems with refrigerant and the air conditioning for electronic equipments. Project of split system for air conditioning lecture rooms and schoolrooms, and units for air conditioning rooms with cluster and server is processed in the second part. Project is derives from calculation thermal stress of air conditioned space. There is calculated price of air conditioner system and made comparison offers of several accessible suppliers. Elaboration drawing documentation of project is part of the diploma thesis.