Wood-polymer composite is a relatively new type of material that combines shattered wood mass and a thermoplastic polymer. This material is utilized especially as an alternative to hard wood in the area of non-bearing exterior elements, as it reaches better properties in terms of the basic durability and low maintenance. Raw material composition and processing of the composite enable to provide a significant modification with further matters leading to an improvement of the end-product properties. Research and development in this field focuses predominantly on the utilization of such modifying additives that either enhance the resistance to weathering or are of the recycled nature, as a significant part of the raw material mixture comprises the constituent obtained from non-renewable resources. The aim of the thesis is the evaluation of the influence of the wood-polymer composite modification separately at two levels. First of them is the modification to matrix by using a recycled polymer, the second one comprises the modification of the wood flour with a secondary spherical filler. Both types of modified composites have been assessed in terms pf the prime characteristics and the resistance to adverse ambient.

The doctoral thesis deals with the strengthening of reinforced concrete columns by FRP fabric wrapping. Its aim is to describe the principles of confinement based on the analytical study, numerical simulations and the results of the experimental program. The description of the confinement philosophy is made with respect to the type of FRP material used. It was therefore possible to present a design process of confinement, which accurately predicts the behaviour of the confined columns. At the same time, some effects limiting the effect of confinement (e.g. the method of wrapping, the number of FRP fabric layers, the slenderness of the element, etc.) are included in the design. The dissertation also presents basic information about FRP material and its properties and gives an overview of design approaches of the FRP confined columns. The dissertation also pointing out the shortcomings of the design code ČSN EN 1992-1-1. The stated example highlights the significant variation in properties of confined concrete determined by selected approaches. This variation of properties complicates the design of this strengthening method. The experimental program was used to verify the basic principles of confinement and, through high columns, allowed a description of the behaviour in almost the whole range of interaction diagram. The conclusions of the work provide information on possible future research direction.

The diploma thesis focuses on manufacturing carbon fiber and epoxy composite material using filament winding method. Material properties of manufactured composite are ap-proximated using analytical and numerical homogenization models. Calculated material properties are applied to design and evaluate reserve factor of retaining sleeve for high speed brushless permanent magnet synchronous motor. Margin of safety of designed rotor is evaluated using composite failure criteria. Test stand for both static and dynamic testing is designed, static test stand is manufactured and assembled. Static strength test is carried out.

Diploma thesis deals with glass fiber surface modification using plasma-enhanced chemical vapor deposition in order to prepare functional interface that enhances the properties of polymer composites. The effect of deposition conditions on shear strength was observed with respect to the chemical composition of the deposited film. Thin films were deposited on planar substrates and fibers using monomer tetravinylsilane in a mixture with oxygen at selected power of plasma discharge. Chemical composition of prepared material was analyzed by infrared spectroscopy. Planar substrate film adhesion was measured using the scratch test. The composite sample was prepared by embedding the surface modified fibers in unsaturated polyester resin, followed by the curing process. The cured composite sample underwent the short beam shear test.

The dissertation thesis deals with the preparation and characterisation of a-CSi:H and a CSiO:H thin films prepared using the process of plasma enhanced chemical vapour deposition (PECVD). Tetravinylsilane (TVS) and its mixtures with argon and oxygen were used to deposit films on both planar substrates and fibre bundles. Main characterisation techniques were employed to study the topography of films, namely atomic force microscopy (AFM). Their mechanical properties were studied through nanoindentation; the nanoscratch test was used to assess the film adhesion to the substrate. Other analysed properties were internal stress and friction coefficient. The particular attention was paid to the work of adhesion and its determination. This knowledge was further applied to the preparation of surface treatments of glass fibres and, subsequently, polymer composites. Those were tested using the push-out test and the short beam shear test. Based on the results, the effects of deposition conditions and the relationships between the studied properties and quantities were determined.

This dissertation deals with the study of durability and degradation repair mortars for reinforced concrete structures. In its theoretical part, there are the research findings on the behavior of repair mortars exposed to corrosive environments with different exposure time and selected high temperatures. Processes occurring in repair mortars during their loading at high temperatures or when exposed to chemically aggressive environments are described, We can find recipes designed for cementitious binder based with a specific replacement using slag or fly ash in its practical part. The object of the research was to determine the durability of the proposed repair mortars, and determine their suitability for use on concrete structures, which may be exposed to a synergistic effect of chemically aggressive environments with high temperatures simulating fire.

Civil engineering development is connected with the application of new construction methods and the development of new building materials. Concrete, as one of the basic building materials, is part of this development. A major turning point in the development of concrete and its properties occurred with the use of new, more efficient plasticizing additives. This allowed to produce concrete with lower water cement ratio, while increasing the strength of concrete. Gradually, the compressive strength of concrete boundary has moved by several levels, when there are currently commonly used concrete with strength of about 100 N/mm2 and with the special methods of concrete production strength range from 250 to 300 N/mm2. A negative aspect of the development of (ultra) high-strength concrete is their energy and economic demands. A characteristic feature of high-strength concrete is a high content of cement and very fine admixtures, especially silica fume. One way to improve the economics of these types of concrete is the application of cheaper admixture based on industrial waste. The content of this work is the observation and description of the properties of high-strength concrete and reactive powder concrete, in which the admixtures were based on industrial waste were applied. Part of this work is the comparison of economic parameters for individual types of concrete.

The subject of diploma project is the design of complex of buildings using hemp lime composite, in English known as Hempcerete. Four detached houses are completed by building of facilities. Buildings have one to three floors. The composite fiercly reduces carbon footprint in building industry. The design is focused on different construction systems using hemp lime composite as a wall filling. Detached houses are made of load bearing timber frame with cast-in-situ hempcrete, building of facilities is made of reinforced concrete with precasted blocks. All buildings are cellarless. Detached houses are shed roofed, building of facilities is gable roofed.