Work describes the relationship between structure and mechanical properties in case of hybrid mixtures. They are composed from polyurethane matrices (eventually polyurethane-urea or polyurethane-inorganic filler mixtures), different rubber fractions as filler and eventually reinforcement made from PET monofilaments. Mechanical behaviour was studied by tensile testing. Studied mechanical properties include tensile modulus, ultimate strength and strain and also specific energy need neccessary for ultimate strength achievement. Prepared materials are naturally porous. Therefore their mechanical behaviour has to be described generally for porous composites. The porosity occurence means, that it is difficult to describe them by models valid for mechanical behaviour (mainly elastic modulus) of nonporous composites. Models are also based on idealized structures on microscopic level. In case of porous composites, it is very difficult to create any idealized structure. The structure is changed with modifications of composition (change of components or their rates). These conditions have lead to utilizing of different approach how to describe the relationship between structure and mentioned mechanical properties. The chosen approach comes from knewledge about structural parametres coming from porosity. Structural parameters describe the structure on macroscopic level. They include interspace volume (volume lying between filler particles), interspace filling (how the matrix fills the interspace volume) and matrix volume fraction. Proposed parameters are used in relations, where they are fitted by exponents to interlay values of chosen mechanical properties for composites containing discrete matrix and filler. Found exponents are then described by properties of matrices to obtain relations describing properties of filled porous materials. Very similar approach was chosen for description in the case of reinforced composites. Proposed relation are potentially valid for materials containing binding matrix, infinity count of fillers and one kind of reinforcement.

This Ph.D. thesis was written under the supervision of Assoc. Prof. Luboš Náhlík, Ph.D. and Assoc. Prof. Pavel Hutař, Ph.D. Thesis is focused mainly on application of generalized linear elastic fracture mechanics, which allows description of crack behaviour propagating from general singular stress concentrators, such as material interfaces or sharp V-notches, and verification of validity of used fracture criteria. The obtained results were used in the next part of the thesis, which deals with the issue of crack propagating in ceramic composites, where the stress distribution field is strongly influenced by the existence of material interface and presence of residual stresses, that arise during manufacturing process of composite.

This work aims to the design of a carbon fiber bicycle frame with production technology suitable for piece production. The work summarizes the methods of production of composite frames and important parameters that must be respected when designing the frame. A Gravel frame was chosen for the design. The frame was designed for production using stainless steel printed lugs with glued composite tubes. The proposed solution was strength tested. The work also contains a design of a production jig for the construction of bicycle frames.

The diploma thesis deals with possibility of utilization raw materials from alternative sources for production of cement-bonded particleboards. In theoretical part the possibilities of modifying composition of cement-bonded slabs with emphasis on their matrix are discussed in detail. On basis of the findings and their evaluation, waste from the formatting of cement-bonded particleboards, micronized limestone, heat sink and high temperature fly ash were selected to the composition modification. The mentioned raw materials were analyzed and subsequently tested as substitutes for the matrix of cement-bonded particleboards in the experimental part. The properties of the proposed materials were tested even in the longer term, including the microstructure.

The interface between aggregate grains and matrix in cementitious composites is their weakest element. The topic is particularly significant in the case of high performance and high strength concrete technology for which the eliminination or reduction of these weak links are necessary. The aim of this thesis is to determine the influence of the interface on the fracture behaviour of the cementitious composites. The fracture experiments were performed for this purpose and were complemented by the nanoindentation’s results and scanning electron microscopy results. Numerical model was created in ANSYS software on the basis of these data and the fracture toughness values of the interface were evaluated by means of the generalized fracture mechanics principles. Conclusion of the thesis is proof that the interface properties have a significant influence on the fracture behaviour of cementitious composites.

This diploma thesis deals with the analysis of volume changes of selected silicate based composites. The first part introduces the issue of volume changes of concrete, especially the shrinkage process, two selected models for shrinkage prediction, describes configuration and course of performed tests, as well as the processing of measured experimental data. The second part contains input data modified by the program GTDiPS and another calculated parameters. The result of the work is the evaluation of the influence of thermal dilation on the development of shrinkage of young concrete. Another output is the comparison of accuracy of the two selected prediction models to capture the course of measured shrinkage.

This diploma thesis deals with the design principles and manifacture of ultra performance concrete (UHPC), reactive powder composites (RPC) and other fine-grained materials, such as Macro defect free (MDF) or Densified systems with small particles (DSP). Theoretical part of this work is focused on the requirements of properties and composition UHPC and RPC and methodology of their design principles. Experimental part describes design principles RPC, manufacture of test specimens, testing of certain physical and mechanical properties, such as tensile strenght, bending strenght and compressive strenght and determination chemical character X-ray and thermal analysis.

The diploma thesis deals with selected fracture tests and evaluation of fracture parameters of cement-based composite. One part of the thesis deals with cement-based composite with glass spherical aggregate of a single fraction of 2 mm. After production, the beams with dimensions of 20×40×200mm exposed to temperatures in the range from 100 to 1000 °C for one hour. Using the non-destructive ultrasonic pulse method, the degree of damage caused by termal load was determined. Selected specimen with central edge notch were then tested in three-point bending and fragments after these tests were tested in compression. In the second part, attention was paid to the evaluation of fracture tests conducted on specimen from drill-cores taken from selected objects located at the former Transgas Gas Control Center in Prague. The specimen were provided with a chevron notch before being tested in three-point bending. The measured data was modified by the GTDiPS program and in the case of the glass composite the StiCrack program was used to evaluate fracture parameters.

Diploma thesis deals with study of properties of cementious composites with fiber reinforcement from glass and basalt inorganic fibers. Diploma thesis includes a theoretical and experimental part. The theoretical part deals with information about glass and basalt fibers, their durability and usage. In the experimental part we monitored properfies of cement composites with basalt and glass fibers. Fibers were exposed to an aggressive environment. The properties of composites with reference fibers were compared with composites with fibers affacted by the aggressive environment. The properties of composites were examined after 28 and 90 days. We monitored compresive strenght, bending tensile strenght, tensile strenght, surface layer strenght and SEM.

The master thesis focuses on the preparation of nickel coating on ceramic (Al2O3) substrate. The deposition of nickel was carried out by the electroless plating method in bath at various kinetic conditions. An impact of varied size, shape and roughness on the quality of the coated surface was investigated. The main goal was to find optimized conditions of the plating process of the thin metal coatings. Prepared nickel coatings were analysed by SEM, EDX analysis, mechanical profilometry and the plating bath was analysed by UV-VIS spectrophotometry. The continuous nickel coatings were achieved by modifying the deposition process, and the kinetic mechanism of experimental conditions was described.