1 |
Displacement of phosphorus in structured soils /Djodjic, Faruk, January 1900 (has links) (PDF)
Diss. (sammanfattning) Uppsala : Sveriges lantbruksuniv., 2001. / Härtill 4 uppsatser.
|
2 |
Seismic behaviour of shallow foundations on layered liquefiable soilsBertalot, Daniele January 2013 (has links)
Earthquakes have been historically perceived as one of the most damaging natural hazards. Seismic soil liquefaction is often one of the major sources of damage and disruptions, and has been observed to severely affect key lifelines. Settlement and tilting of shallow foundations resting on saturated sandy/silty soils has been repeatedly observed throughout the world as a consequence of liquefaction or softening of the foundation soil. Such settlements and tilts can render structures unusable, and homes uninhabitable, causing significant economic losses. Despite the undoubted relevance of this phenomenon, field data on the liquefaction induced settlement of shallow foundations are scarce. New data from 24 buildings that suffered settlement and tilting as a consequences of soil liquefaction during the February 27th 2010 Maule earthquake in Chile, are presented in this work to supplement the existing field cases database. Due to the complexity of this phenomenon, field data are not suffcient to fully understand the mechanisms controlling the settlement of structures resting on liquefied or softened ground.In this framework, centrifuge modelling provides a valuable tool for research by reproducing field conditions in a controlled environment. A series of 10 dynamic centrifuge tests were performed as part of this work. Thanks to the University of Dundee newly installed centrifuge-mounted servohydraulic earthquake simulator, scaled version of field earthquake motions were reproduced in the models tested, enhancing the reliability of experimental results. Particular attention was given to the effect of key parameters on the observed foundation settlement. These parameters are the bearing pressure of the foundation, the thickness of the liquefied soil layer and the soil's relative density. The effect of the soil layering pattern was also investigated, with particular attention to the effect of a low permeability soil crust overlying the liquefied soil. Results suggest that the excess pore pressure generation in the foundation soil is significantly influenced by the stress distribution due to the presence of the foundation itself. In particular, lower excess pore pressure where measured in soil subjected to high static shear stresses (i.e. below the edge of a footing). The soil stratification pattern, and the relative thicknesses of the liquefied and un-liquefied portions of the soil profile, were also found to play a crucial role in determining the seismic demand at foundation level and the type of failure mechanism leading to foundation settlement. Observed differences between centrifuge (i.e. field) and element testing soil response are also discussed. Experimental results are compared to field observations, with the aim of improving the current understanding of the behaviour of structures built on shallow foundations in the eventuality of seismic induced liquefaction of their foundation soil.
|
3 |
Uplift Capacity Of Horizontal Strip And Circular Anchors In Homogeneous And Layered SoilsManjunatha, K 12 1900 (has links) (PDF)
No description available.
|
4 |
A Comparison Of Load Test Data And Predicted Behavior Of Augercast Piles In Layered SoilsHudson, John 01 January 2008 (has links)
The use of auger cast-in-place (ACIP) pilings is very common in Florida; however, there is a significant degree of uncertainty in determining the actual capacity of the pilings, especially when the pilings are installed through layers of cohesive soils. Therefore, there is a need to improve upon the existing methods of predicting the behavior of ACIP piles in layered soils. As a result, the primary objective of this study is to determine if a significant difference exists between the accepted methods of pile load test analysis. Provided a significant difference is noted, the secondary objective would be to determine if an improvement could be made to enhance the existing empirical relationships used to predict pile behavior in layered soils. In order to accomplish these objectives, this study presents an evaluation of some of the most commonly used methods for predicting ACIP pile capacity based upon the results of actual field load tests. Data from twenty-five load tests were analyzed using popular methods and statistical analyses were preformed to determine and evaluate the data. These evaluations were utilized to explore correlations between predicted behavior and actual results. Based upon the results of this study, there is no statistically significant difference between the load test analyses methods examined. As a result, no improvement to the existing methods of predicting ACIP pile behavior in layered soils may be recommended at this time, and further research in this subject matter is recommended.
|
5 |
Analyses Of Two-Layer Soil Systems Beneath Rigid FootingsVinod, P 07 1900 (has links) (PDF)
No description available.
|
6 |
Two Dimensional Numerical Modelling Of Variably Saturated FlowsMuthineni, Srinivas 01 1900 (has links)
The prediction of moisture and contaminant transport through unsaturated soil to ground water is becoming increasingly important in the fields of hydrology, agriculture and environmental engineering. Computer aided simulation techniques enables one to conduct a series of systematic numerical experiments to analyze flow phenomenon in subsurface hydrology under various physical and chemical processes. The flow movement depends upon medium characteristics, initial and boundary conditions, which reflect, physical processes occurring below the ground. To understand the effects of physical process an efficient and accurate model is needed. Thus the model developed must be able to handle varied initial and boundary conditions. In this regard, infiltration into a very dry soil becomes a very important problem of study.
Most of the earlier numerical models developed are concentrated on the development of an efficient algorithm or the modelling of a particular process which govern the flow in unsaturated or saturated-unsaturated homogeneous medium. Not much work has been done on the analysis of variably saturated flow in layered soil medium. Models to simulate unsaturated flow through dry soils, especially through layered soils with varied boundary conditions are very limited. Further, not much studies have been reported in the literature on the prediction of seepage face development and the phreatic surface movement in variably saturated media with layering. These aspects are very important in determining the flow field and the discharge from the domain. A detailed literature review covering above aspects has been made and is reported in this thesis.
In the present work, two dimensional numerical models to predict the movement of wetting front in unsaturated domain and the movement of the phreatic surface in homogeneous and layered porous media under various initial and boundary conditions are developed based on finite difference and finite volume techniques. These models can handle flow in both rectangular flow domains and radial flow domains. The initial condition settings include the handling of very dry soil medium without any transformation of the governing equation, handling of infiltration and constant head conditions at the boundaries under steady state as well as transient scenarios. The models are also able to handle various soil moisture characteristics which depict the nonlinear behaviour between hydraulic conductivity, moisture content and pressure head in a soil media.
A mixed form of the governing partial differential equation is used in the present study as it leads to better mass conservation. The finite difference model uses a central difference approximation for the space derivatives and an Eulerian backward difference approximation for the time derivative. The fully implicit formulation is solved iteratively using Strongly Implicit Procedure after making Picard approximation for the highly nonlinear coefficients. The process of infiltration into an initially dry soil leads to the development of a steep wetting front. As the finite volume technique is naturally an upwind method, it is expected to play a positive role in modelling such processes accurately. Hence, a finite volume model is also developed by approximating the convective part using a MUSCL approach and a fully implicit central difference method for the diffusive part of the governing equation.
The models developed are validated using both experimental data and numerical solutions for problems reported in the literature. The validation problems cover a wide range of physical scenarios such as: infiltration into a very dry soil, infiltration into a dry soil column with gravity drainage, development of water table mound, steady state drainage in a sand filled wedge shaped tank with seepage face development and transient seepage face development in a rectangular domain. Five test problems are used for the validation of the models. The developed models perform very well for the test problems considered, indicating the models' capability in handling such situations. The results obtained by using the present models for simulating flow through highly unsaturated (very dry) soils show that the models perform very well when compared with models which use transformation techniques to handle such problems. The performance of the present models in comparison with the experimental data and numerical models available in the literature show the suitability of the present models in handling such situations.
The present models are also used to analyse various types of unsaturated flow problems with varying initial and boundary conditions. The boundary conditions considered are no flow and /or free flow conditions along the left, right and bottom boundaries with infiltration condition along a part of the top boundary. For the various cases considered in the present study, infiltration rate varies from 5 cm/day to 50cm/day through an initially very dry soil of -15000 cm pressure head in homogeneous and layered soils. Different types of soil media considered vary from sandy loam, loam and clay with horizontal and vertical layering of these soils. A total number of 14 cases are analysed. The results are discussed in terms of pressure head variation in the flow domain along with moisture redistribution for all the cases under consideration. It is observed from these studies that the infiltration rate play an important role on the wetting front movement through layered soils depending on the type of layering and the boundary conditions considered. The soil properties of various layers affect the movement of wetting front by changing the direction of movement. Even though the wetting front movement is predominantly vertical, there is a tendency for the wetting front to move in the horizontal direction as it moves from a coarse soil to fine soil. It is also observed that the vertical layering of soils with different hydraulic conductivity helps in redirecting the flow towards the bottom boundary through the neighboring coarser layers.
As finite volume method is more suitable for simulating sharp fronts, it is expected to perform better than finite difference method for simulating infiltration into very dry soils. So, a comparison is made between the performance of these two models by using the above test problems. It is observed from these studies that the performance of both the models are same except that the finite volume method takes much more CPU time than the finite difference model. Considering the type of problems tested, it is observed that for modelling unsaturated and saturated-unsaturated flows, finite difference method is better in comparison to finite volume method. It may be due to the predominant diffusive characteristics of the governing equation even while modelling flow through very dry soils.
Proper estimation of the seepage height is an important aspect in finding the discharge through the porous medium. It is observed from the literature that the use of a saturated flow model in such situations can lead to an underestimation of the discharge through the porous medium. This effect is more important when dealing with small dimension problems. It is also observed that various parameters which govern the moisture movement through saturated-unsaturated regions affect proper estimation of the seepage face height and there by discharge. Various factors like effect of boundary conditions, type of soil layering, problem dimension and aspect ratio on seepage face development and the associated phreatic surface formation is studied in the present work. It is seen from the present study that the seepage face development is more in rectangular flow domain than in radial flow domain for both homogeneous and layered soils. It is also seen that the seepage face development in rectangular problems are more sensitive than radial flow problems for various factors considered. The seepage height is also influenced by the tail water level. It is seen from the present study that as the tail water level increases the seepage face reduces with no seepage face development for some of the cases studied. This influence is relatively less for radial flow problems. As the length of the domain increases the seepage height decreases. It is seen that for different cases with same horizontal dimension, as the height of the domain increases the seepage face height also increases. This phenomenon is observed for both homogeneous and layered soil medium. The influence of the aspect ratio, which is the ratio of the length to height of the domain indicate that as the aspect ratio increases the seepage height decreases. The type of the soil layering is observed to have a very strong influence on the seepage face development. The study for understanding the effect of soil layering on the development of seepage face and phreatic surface suggest that as the coarseness of the material increases, the phreatic surface become flatter and its steepness increases with the fineness of the soil.
The present model is also used for studying the transient phreatic surface movement and the seepage face development. This is studied for homogeneous and layered rectangular soil medium. The present study is used to understand the effect of specific storage on the phreatic surface movement and the seepage face development. The studies indicate that the influence of specific storage on the seepage face development is insignificant in homogeneous soils with only very little effect in the early time for longer domains. It is also observed that the influence of the specific storage is significant in the case of layered soils. This effect depends on the type of layering and the problem dimension and is observed to have influence for relatively longer period. This observation suggests the importance of specific storage on transient seepage face development. When the specific storage effect is considered the drainage of the soil become faster resulting in a faster decline of the phreatic surface with time. The influence of specific storage is also studied considering the problem dimension effect. It is seen that as the aspect ratio increases, the effect of specific storage on the phreatic surface development decreases. The studies with change in the upstream boundary condition from a constant head to a no flow condition indicate that the effect of specific storage has no significant influence on the phreatic surface development for both homogeneous and layered soils.
|
7 |
Shaking Table Testing of Geotechnical Response of Densified Fine-Grained Soils to Cyclic Loadings: Application to Highly Densified TailingsAlshawmar, Fahad Abdulaziz 17 March 2021 (has links)
Liquefaction is a major challenge in geotechnical engineering in which soil strength and stiffness are compromised due to earthquake activity. Understanding and predicting the behaviour and liquefaction susceptibility of soils under cyclic loading is a critical issue in civil engineering, mining and protective engineering. Numerous earthquake-induced ground failure events (e.g., substantial ground deformation, reduced bearing capacity) or liquefaction in natural fine-grained soils or manmade fine-grained soils (i.e., fine tailings) produced by mining activities have been observed and reported in the literature. Tailings are manmade soils that remain following the extraction of metals and minerals from mined ore in a mine processing plant. Traditionally, such tailings are stored in surface tailings impoundments at the mine’s surface. However, geotechnical and environmental risks and consequences related to conventional tailings impoundments have attracted the attention of the engineering community to develop novel methods of tailings disposal and management to minimize geotechnical and environmental risks. Thus, engineers have introduced and implemented innovative tailings technologies—thickened tailings and paste tailings—as cost-effective means for tailings management in mining operations. As both thickened tailings and paste tailings have lower water content and higher solid content than tailings in conventional impoundments, these tailings may be more resistant to liquefaction. However, it should be noted that the seismic or cyclic behaviour of these thickened and paste tailings, with and without heavy rainfall effects, are not fully understood. There is little technical information or data about the behaviour and liquefaction of thickened and paste tailings under seismic or cyclic loading conditions.
The objective of the present PhD research is to investigate the response of layered thickened and paste tailings deposits, with and without heavy rainfall effects, to cyclic loads by conducting shaking table tests. To simulate the field deposition of thickened and paste tailings, tailings were deposited in three thin layers in a flexible laminar shear box (FLSB) attached to the shaking table equipment. A sinusoidal seismic loading at a frequency of 1 Hz and peak horizontal acceleration of 0.13g was applied at the bottom of the layered tailings deposits. Acceleration, displacement and pore water pressure responses to the cyclic loading were monitored at the middle depth of each layer of the tailings deposits. Regarding the acceleration response of these thickened and paste tailings deposits (without the effect of heavy rainfall), there was no difference between the middle of the bottom and middle layers or at the base of the shaking table. However, the acceleration at the middle of the top layer differed from the acceleration at the base of the shaking table. Throughout shaking, the layered tailings deposits (with and without the effect of heavy rainfall) exhibited contraction and dilation responses. The excess pore water pressure ratios of the layered thickened tailings deposit that was not exposed to heavy rainfall prior to shaking were found to exceed 1.0 during shaking. However, for the layered paste tailings deposit that was not exposed to the effect of heavy rainfall prior to shaking, the excess pore water pressure ratios were found to be lower than 0.85 during shaking. This reveals that without the effect of heavy rainfall, the layered thickened tailings deposit was susceptible to liquefaction, whereas the layered paste tailings deposit was resistant to liquefaction during shaking. The excess pore water ratios of the layered thickened and the paste tailings deposits that were exposed to heavy rainfall prior to shaking were found to be lower than 0.8 during shaking. This reveals that with the effect of heavy rainfall, the layered thickened and paste tailings deposits were resistant to liquefaction during shaking. The results and findings of this PhD research thus provide valuable information for the implementation of tailings in earthquake-prone areas.
|
8 |
Design of tunnels using the hyperstatic reaction method / Conception de tunnels au moyen de la méthode hyperstatique aux coefficients de réactionDu, Dianchun 07 November 2019 (has links)
Ce travail de recherche a pour objectif de présenter la conception de tunnels au moyen de la méthode hyperstatique aux coefficients de réaction (HRM). Les modèles développés par la méthode HRM sont tout d'abord proposés pour étudier le comportement de tunnels en forme de fer à cheval inversée dans différentes conditions, par exemple en considérant deux cas de charge, deux géométries différentes de revêtement de tunnel, deux cas de coefficients de réaction différents, changement de la rigidité des coefficients de réaction, conditions de sol multicouches, surcharges en surface et sol saturés. Les modèles présentés permettent d’aboutir à des prévisions qualitatives avec une efficacité de calcul élevée par rapport à la modélisation numérique en différences finies. Une analyse paramétrique est ensuite réalisée pour estimer le comportement du revêtement de tunnel en forme de fer à cheval dans un grand nombre de cas couvrant les conditions généralement rencontrées dans la pratique. Ensuite, en prenant comme exemple un tunnel métropolitain à deux voies, une série de fonctions mathématiques est déduite et utilisée dans le processus d'optimisation d’un tunnel de forme complexe, ce qui offre aux concepteurs de tunnels un support théorique leur permettant de choisir la forme optimale du tunnel à mettre en oeuvre. L’effet de différents paramètres, tels que le coefficient des terres au repos, le module d’Young du sol, la profondeur du tunnel, les surcharges en surface, sur les efforts internes et la forme du tunnel. Dans la dernière partie du manuscrit, l’influence d’un changement de température sur les efforts dans le revêtement d’un tunnel circulaire au moyen de la méthode HRM est étudiée en tenant compte de différents facteurs, tels que l’épaisseur du revêtement de tunnel, le module d’élasticité du revêtement et le coefficient de dilatation thermique du sol. / This research work aims to present the design of tunnel by means of the Hyperstatic Reaction Method (HRM). The models developed by the HRM method are firstly proposed for investigating the behaviour of U-shaped tunnels under different conditions, considering two load cases, two different geometries of U-shaped tunnel lining, two different cases of springs, change of the spring stiffness, multi-layered soil conditions, surcharge loading, and saturated soil masses. The presented models permit to obtain good predictions with a high computational efficiency in comparison to finite difference numerical modelling. Then a parametric analysis has permitted to estimate the U-shaped tunnel lining behaviour in a large number of cases which cover the conditions that are generally encountered in practice. Thereafter, taking a twin-lane metro tunnel as an example, a series of mathematical functions used in the optimization progress of sub-rectangular tunnel shape is deduced, which gives to tunnel designers a theoretical support to choose the optimal sub-rectangular tunnel shape. The effect of different parameters, like the lateral earth pressure factor, soil Young’s modulus, tunnel depth, surface loads, on the internal forces and shape of sub-rectangular tunnel is then given. In the last part of the manuscript, the influence of a temperature change on the lining forces of circular tunnel by means of the HRM method is investigated, considering different factors, such as the tunnel lining thickness, lining elastic modulus and ground coefficient of thermal expansion.
|
Page generated in 0.0779 seconds