Spelling suggestions: "subject:"leaks model"" "subject:"leads model""
1 |
Análise Completa das Fibras de Bragg de Núcleo Oco. / The full analysis of Bragg fibers with hollow core.Leonardo Ribeiro Marinho 17 December 2013 (has links)
A evolução nos sistemas digitais de comunicação está intrinsicamente relacionada ao desenvolvimento da tecnologia de fibras ópticas. Desde a sua criação, na década de 60, inúmeras pesquisas vem sendo realizadas com o intuito de aumentar a capacidade de informação transmitida, por meio da redução da atenuação, controle da dispersão cromática e eliminação das não-linearidades. Neste contexto, as Fibras de Bragg surgem como uma estrutura de grande potencialidade para se minimizar tais inconvenientes. As fibras de Bragg possuem um mecanismo de operação diferente em relação às fibras tradicionais
de suportar os modos confinados. Nelas, o núcleo possui um baixo índice de refração, e a casca é constituída por anéis dielétricos de diferentes índices de refração, alocados alternadamente. Para uma fibra de Bragg com núcleo oco, como a considerada neste trabalho,
há perdas decorrentes dos modos de fuga. Portanto, a análise da dispersão destas estruturas se situa no plano complexo, tornando-a muito difícil. Esta dissertação será fundamentada em uma estratégia imprescindível à análise dos modos transversais TE0m, TM0m e dos híbridos. Os resultados encontrados são validados confrontando-os com os obtidos na literatura. O trabalho discutirá as perdas e dispersões dos modos citados, e os resultados obtidos poderão nortear as pesquisas das fibras de Bragg. / The evolution of digital communication systems is intrinsically related to the development
of optical fiber technology. Since its creation in the 1960s, many studies have
been conducted in order to increase the system capacity, such as the attenuation reduction,
chromatic dispersion control and elimination of nonlinearities. In this context, Bragg
fibers appear as a structure with great potential to mitigate these drawbacks. Bragg fibers
have a different operational mechanism with respect to traditional fibers to support
the confined modes. Their core has a low refractive index, and the cladding consists of
dielectric rings of different refractive indices, allocated alternately. For a Bragg fiber with
hollow core, as considered in this paper, there are losses due to the occurrence of leaky
modes. Therefore, the dispersion analysis of these structures falls in the complex plane,
making it even harder. This dissertation will be based on a strategy essential to the
analysis of transverse modes: TE0m, TM0m and hybrids. The found results have been
validated by comparing them with those obtained in the literature. The paper discusses
the losses and dispersions of the mentioned modes, and the results obtained will serve to
guide the research on Bragg fibers.
|
2 |
Análise Completa das Fibras de Bragg de Núcleo Oco. / The full analysis of Bragg fibers with hollow core.Leonardo Ribeiro Marinho 17 December 2013 (has links)
A evolução nos sistemas digitais de comunicação está intrinsicamente relacionada ao desenvolvimento da tecnologia de fibras ópticas. Desde a sua criação, na década de 60, inúmeras pesquisas vem sendo realizadas com o intuito de aumentar a capacidade de informação transmitida, por meio da redução da atenuação, controle da dispersão cromática e eliminação das não-linearidades. Neste contexto, as Fibras de Bragg surgem como uma estrutura de grande potencialidade para se minimizar tais inconvenientes. As fibras de Bragg possuem um mecanismo de operação diferente em relação às fibras tradicionais
de suportar os modos confinados. Nelas, o núcleo possui um baixo índice de refração, e a casca é constituída por anéis dielétricos de diferentes índices de refração, alocados alternadamente. Para uma fibra de Bragg com núcleo oco, como a considerada neste trabalho,
há perdas decorrentes dos modos de fuga. Portanto, a análise da dispersão destas estruturas se situa no plano complexo, tornando-a muito difícil. Esta dissertação será fundamentada em uma estratégia imprescindível à análise dos modos transversais TE0m, TM0m e dos híbridos. Os resultados encontrados são validados confrontando-os com os obtidos na literatura. O trabalho discutirá as perdas e dispersões dos modos citados, e os resultados obtidos poderão nortear as pesquisas das fibras de Bragg. / The evolution of digital communication systems is intrinsically related to the development
of optical fiber technology. Since its creation in the 1960s, many studies have
been conducted in order to increase the system capacity, such as the attenuation reduction,
chromatic dispersion control and elimination of nonlinearities. In this context, Bragg
fibers appear as a structure with great potential to mitigate these drawbacks. Bragg fibers
have a different operational mechanism with respect to traditional fibers to support
the confined modes. Their core has a low refractive index, and the cladding consists of
dielectric rings of different refractive indices, allocated alternately. For a Bragg fiber with
hollow core, as considered in this paper, there are losses due to the occurrence of leaky
modes. Therefore, the dispersion analysis of these structures falls in the complex plane,
making it even harder. This dissertation will be based on a strategy essential to the
analysis of transverse modes: TE0m, TM0m and hybrids. The found results have been
validated by comparing them with those obtained in the literature. The paper discusses
the losses and dispersions of the mentioned modes, and the results obtained will serve to
guide the research on Bragg fibers.
|
3 |
Simulation of III-V Nanowires for Infrared PhotodetectionAzizur-Rahman, Khalifa M. January 2016 (has links)
The absorptance in vertical nanowire (nw) arrays is typically dominated by three optical phenomena: radial mode resonances, near-field evanescent wave coupling, and Fabry–Perot (F-P) mode resonances. The contribution of these optical phenomena to GaAs, InP and InAs nw absorptance was simulated using the finite element method. The study compared the absorptance between finite and semi-infinite nws with varying geometrical parameters, including the nw diameter (D), array period (P), and nw length (L). Simulation results showed that the resonance peak wavelength of the HE1n radial modes linearly red-shifted with increasing D. The absorptance and spectral width of the resonance peaks increased as L increased, with an absorptance plateau for very long nws that depended on D and P. Near-field coupling between neighbouring nanowires (nws) was observed to increase with increasing diameter to period ratio (D/P). The effect of F-P modes was more pronounced for shorter nws and weakly coupled light. Based on the collective observation of the correlation between nw geometry and optical phenomena in GaAs, InP, and InAs nw arrays, a periodic array of vertical InSb nws was designed for photodetectors in the low-atmospheric absorption window (λ = 3-5 μm) within the mid-wavelength infrared (MWIR) spectrum (λ = 3-8 μm). Simulations, using the finite element method, were implemented to optimize the nw array geometrical parameters (D, P, and L) for high optical absorptance (~0.8), which exceeded that of a thin film of equal thickness. The results further showed that the HE1n resonance wavelengths in InSb nw arrays can be tuned by adjusting D and P, thus enabling multispectral absorption throughout the near infrared (NIR) to MWIR region. Optical absorptance was investigated for a practical photodetector consisting of a vertical InSb nw array embedded in bisbenzocyclobutene (BCB) as a support layer for an ultrathin Ni contact layer. Polarization sensitivity of the photodetector was examined. Lastly, how light flux enters the nw top and sidewalls on HE11 resonance was investigated. / Dissertation / Doctor of Philosophy (PhD)
|
4 |
Modes and propagation in microstructured optical fibresIssa, Nader January 2005 (has links)
Microstructured optical fibres (MOFs), also commonly called photonic crystal fibres or holey fibres, describe a type of optical fibre in which continuous channels of (typically) air run their entire length. These `holes' serve to both confine electromagnetic waves within the core of the fibre and to tailor its transmission properties. In order to understand and quantify both of these functions, a new computational algorithm was developed and implemented. It solves for the eigenvalues of Maxwell's wave equations in the two-dimensional waveguide cross-section, with radiating boundary conditions imposed outside the microstructure. This yields the leaky modes supported by the fibre. The boundary conditions are achieved exactly using a novel refinement scheme called the Adjustable Boundary Condition (ABC) method. Two implementations are programmed and their computational efficiencies are compared. Both use an azimuthal Fourier decomposition, but radially, a finite difference scheme is shown to be more efficient than a basis function expansion. The properties of the ABC method are then predicted theoretically using an original approach. It shows that the method is highly efficient, robust, automated and generally applicable to any implementation or to other radiating problems. A theoretical framework for the properties of modes in MOFs is also presented. It includes the use of the Bloch-Floquet theorem to provide a simpler and more efficient way to exploit microstructure symmetry. A new, but brief study of the modal birefringence properties in straight and spun fibres is also included. The theoretical and numerical tools are then applied to the study of polymer MOFs. Three types of fibres are numerically studied, fabricated and characterised. Each is of contemporary interest. Firstly, fabrication of the first MOFs with uniformly oriented elliptical holes is presented. A high degree of hole ellipticity is achieved using a simple technique relying on hole deformation during fibre draw. Both form and stress-optic birefringence are characterized over a broad scaled-wavelength range, which shows excellent agreement with numerical modelling. Secondly, an analysis of leaky modes in real air core MOFs, fabricated specifically for photonic band gap guidance, is then used to identify alternative guiding mechanisms. The supported leaky modes exhibit properties closely matching a simple hollow waveguide, weakly influenced by the surrounding microstructure. The analysis gives a quantitative determination of the wavelength dependent confinement loss of these modes and illustrates a mechanism not photonic band gap in origin by which colouration can be observed in such fibres. Finally, highly multimode MOFs (also called `air-clad' fibres) that have much wider light acceptance angles than conventional fibres are studied. An original and accurate method is presented for determining the numerical aperture of such fibres using leaky modes. The dependence on length, wavelength and various microstructure dimensions are evaluated for the first time for a class of fibres. These results show excellent agreement with published measurements on similar fibres and verify that bridge thicknesses much smaller than the wavelength are required for exceptionally high numerical apertures. The influence of multiple layers of holes on the numerical aperture and capture efficiency are then presented. It shows that a substantial increase in both these parameters can be achieved for some bridge thicknesses. Simple heuristic expressions for these quantities are given, which are based on the physical insight provided by the full numerical models. The work is then supported by the first fabrication attempts of large-core polymer MOFs with thin supporting bridges. These fibres exhibit relatively high numerical apertures and show good agreement with theoretical expectations over a very wide scaled-wavelength range.
|
5 |
Modes and propagation in microstructured optical fibresIssa, Nader January 2005 (has links)
Microstructured optical fibres (MOFs), also commonly called photonic crystal fibres or holey fibres, describe a type of optical fibre in which continuous channels of (typically) air run their entire length. These `holes' serve to both confine electromagnetic waves within the core of the fibre and to tailor its transmission properties. In order to understand and quantify both of these functions, a new computational algorithm was developed and implemented. It solves for the eigenvalues of Maxwell's wave equations in the two-dimensional waveguide cross-section, with radiating boundary conditions imposed outside the microstructure. This yields the leaky modes supported by the fibre. The boundary conditions are achieved exactly using a novel refinement scheme called the Adjustable Boundary Condition (ABC) method. Two implementations are programmed and their computational efficiencies are compared. Both use an azimuthal Fourier decomposition, but radially, a finite difference scheme is shown to be more efficient than a basis function expansion. The properties of the ABC method are then predicted theoretically using an original approach. It shows that the method is highly efficient, robust, automated and generally applicable to any implementation or to other radiating problems. A theoretical framework for the properties of modes in MOFs is also presented. It includes the use of the Bloch-Floquet theorem to provide a simpler and more efficient way to exploit microstructure symmetry. A new, but brief study of the modal birefringence properties in straight and spun fibres is also included. The theoretical and numerical tools are then applied to the study of polymer MOFs. Three types of fibres are numerically studied, fabricated and characterised. Each is of contemporary interest. Firstly, fabrication of the first MOFs with uniformly oriented elliptical holes is presented. A high degree of hole ellipticity is achieved using a simple technique relying on hole deformation during fibre draw. Both form and stress-optic birefringence are characterized over a broad scaled-wavelength range, which shows excellent agreement with numerical modelling. Secondly, an analysis of leaky modes in real air core MOFs, fabricated specifically for photonic band gap guidance, is then used to identify alternative guiding mechanisms. The supported leaky modes exhibit properties closely matching a simple hollow waveguide, weakly influenced by the surrounding microstructure. The analysis gives a quantitative determination of the wavelength dependent confinement loss of these modes and illustrates a mechanism not photonic band gap in origin by which colouration can be observed in such fibres. Finally, highly multimode MOFs (also called `air-clad' fibres) that have much wider light acceptance angles than conventional fibres are studied. An original and accurate method is presented for determining the numerical aperture of such fibres using leaky modes. The dependence on length, wavelength and various microstructure dimensions are evaluated for the first time for a class of fibres. These results show excellent agreement with published measurements on similar fibres and verify that bridge thicknesses much smaller than the wavelength are required for exceptionally high numerical apertures. The influence of multiple layers of holes on the numerical aperture and capture efficiency are then presented. It shows that a substantial increase in both these parameters can be achieved for some bridge thicknesses. Simple heuristic expressions for these quantities are given, which are based on the physical insight provided by the full numerical models. The work is then supported by the first fabrication attempts of large-core polymer MOFs with thin supporting bridges. These fibres exhibit relatively high numerical apertures and show good agreement with theoretical expectations over a very wide scaled-wavelength range.
|
Page generated in 0.0497 seconds