This thesis is an examination of policy-making and practice in design education in England from 1837-1992. It takes a longue durée approach to the history of the development of design education to provide a new narrative which shows a pattern of recurring debates concerning the purpose of design education and how it should be taught. Using the curricula of furniture design courses at three art schools to illustrate the way policy was put into practice, this thesis argues that historical context is key to understanding why debates regarding the way designers should be trained for industry have recurred since 1837. Based on a wide variety of primary source material the thesis contributes to historiography by extending the scope of previous histories of art and design education, and also, for the first time, focuses solely on the development of design education, whilst acknowledging its place in the wider development of art and design education. Following the introduction, chapter two of this thesis examines the events which led to the 1835-6 Select Committee and argues that many of the issues raised during the Committee influenced the teaching of design education through the remainder of the nineteenth century; this is further demonstrated through chapter three. Charting the development of design education into the twentieth century through chapters four, five and six, this thesis shows that changing historical contexts, such as the development of industrial methods or wider changes in higher education, have also had an impact on design education. In the light of changing historical contexts, policy makers for design education have continually questioned what design students should be taught and how they should be taught, which accounts, in part, for the recurring nature of debates in design education.

Not available / text

This study is concerned with the compositional analysis of Roman and early post-Roman glass from both domestic assemblages and the remains derived from glass working and producing sites in Britain, using Inductively Coupled Plasma Spectrometry (ICPS). Samples analysed were from glassworking waste from Mancetter (midsecond century), Leicester (third century) and Worcester (first to third centuries), glass production debris, probably manufactured from the raw materials, in conjuncton with a domestic assemblage, from Coppergate (first to fourth centuries, or possibly later), and a domestic assemblage from Fishergate (spanning both the Roman and immediate post- Roman periods). All the glass analysed was shown to be of a typical and uniform soda-limesilica composition, except for a small number of vessel fragments from York which were higher in calcium. Any compositional differences between blue-green glasses typologically dated either to the Roman or Saxon periods, were found not to be consistent. Analysis of the colourless glass showed that the majority appeared to be actively decolorized using antimony, in conjunction with apparent differences in the compositions of the raw materials, when compared to glass of the same date in other colours. Compositional differences between melted waste from Mancetter, Leicester and Worcester, were apparent, but not to an extent which allowed characterization to be successful. Analysis of glassmelting pots from Coppergate showed some high temperature glassworking (and possibly glassmaking) could have occurred. Other debris, thought to be indicative of glassmaking was also analysed and compared to the composition of the Roman domestic assemblage.

This study is concerned with the compositional analysis of Roman and early post-Roman glass from both domestic assemblages and the remains derived from glass working and producing sites in Britain, using Inductively Coupled Plasma Spectrometry (ICPS). Samples analysed were from glassworking waste from Mancetter (midsecond century), Leicester (third century) and Worcester (first to third centuries), glass production debris, probably manufactured from the raw materials, in conjuncton with a domestic assemblage, from Coppergate (first to fourth centuries, or possibly later), and a domestic assemblage from Fishergate (spanning both the Roman and immediate post- Roman periods). All the glass analysed was shown to be of a typical and uniform soda-limesilica composition, except for a small number of vessel fragments from York which were higher in calcium. Any compositional differences between blue-green glasses typologically dated either to the Roman or Saxon periods, were found not to be consistent. Analysis of the colourless glass showed that the majority appeared to be actively decolorized using antimony, in conjunction with apparent differences In the compositions of the raw materials, when compared to glass of the same date in other 0 colours. Compositional differences between melted waste from Mancetter, Leicester and Worcester, were apparent, but not to an extent which allowed characterization to be successful. Analysis of glassmelting pots from Coppergate showed some high temperature glassworking (and possibly glassmaking) could have occurred. Other debris, thought to be indicative of glassmaking was also analysed and compared to the composition of the Roman domestic assemblage.

This thesis further analyses the question of political representation of ethnic minorities. Its main theoretical framework is created by theory of cleavages by S. Rokkan and S.M. Lipset, which describes conflict lines within the society and its influence on the party system. Further on, different definitions and approaches to the topic of ethnic identity, ethnic conflict and and ethnic and regional parties are introduced. Second part of this thesis is composed of four case studies of selected European cities with relevant ethnic minorities. These are Leicester in United Kingdom, Espoo in Finland, German Frankfurt am Main and Romanian Cluj-Napoca. These cases are firstly analyzed by context of political representation of ethnic minorities. That is in the first place the share and nature of minority population and in the second place attributes of local political systems within both horizontal and vertical dimension. Factors with direct impact on political representation of ethnic minorities like electoral system, election right and any other special measures are analyzed further on.

This thesis addressed the need for improved analysis and interpretation of primary meter half-hourly energy consumption data. The current work offers a novel benchmarking technique that was tested for 6 types of municipal buildings. This approach is different from conventional annual benchmarking mainly because it uses electricity and gas data in half-hourly periods, together with outside temperature data. A survey to European local authorities’ metering and monitoring practices was conducted in order to assess municipal energy managers' current procedures and needs in terms of data analysis to assess building energy performance and to identify potential energy saving opportunities. The benchmarking approach was developed considering the energy managers’ needs, but also the state-of the art in terms of building energy monitoring techniques, particularly building energy signatures, and the analysis techniques used on electricity grid demand forecasting. The benchmarking approach is based on the use of a metric composed of several indicators that are related to the load demand shape profile and the building energy signature. The comparison of indicators for buildings of the same type using standard scores identifies uncommon load demand profile characteristics and/or gas dependency on outside temperature in specific buildings. The metric is able to support the identification of potential energy wastage, which is linked to the detection of opportunities to save energy. The benchmarking technique was tested in 81 municipal building owned by Leicester City Council. This methodology can be applied to any non-domestic building equipped with primary meters for registering half-hourly electricity and gas consumption. In theory, this approach can also be applied to residential buildings, and to other short time series data types, for example quarter-hourly or 10 minutes interval data. The main contribution of this thesis is to improve the objectivity of building primary meter half-hourly electricity and gas consumption data analysis and interpretation by using quantitative parameters, instead of subjective visualisation techniques. The interpretation of building consumption data in short time series periods can now be streamlined, automated and perhaps incorporated in existing energy analysis software. This thesis raises questions that can lead to future research projects aiming to improve the metric and also to enlarge the scope of its application to national and European scale, to other building types and to other utilities.