Ein vielversprechendes Design für organische lichtemittierende Dioden (OLEDs) verwendet eine Wirt-Gast-Strategie durch Dispergieren einer kleinen Menge eines hocheffizienten Emitters (der Gast) in eine passende Transportmatrix (der Wirt). Die Aufgabe des Wirts ist den Exzitonentranport zum Emitter sicherzustellen und den Zerfall von Triplet-Exzitonen zu verhindern, und damit eine hohe Bauteilperformance zu erreichen. Die vorliegende Arbeit konzentriert sich auf die Beziehung zwischen Molekülstruktur und optoelektrischer Eigenschaften von Carbazol/Dibenzothiophen-Derivaten. Die Untersuchung umfasst sieben dieser Derivate für den Wirt, bei denen die Carbazoleinheit als Donator und die Dibenzothiopheneinheit als Akzeptor fungiert, wobei beide durch einen oder mehrere Phenylabstandshalter verbunden sind. Diese Wahl der Wirtsmaterialien erlaubt es den Einfluss der erweiterten Phenylabstandshalter und der unterschiedlichen molaren Verhältnisse von Akzeptor zu Donator zu untersuchen. Es ergab sich, dass eine kürzere Phenylabstandshalterlänge die Bauteilperformance durch eine größere Löcher- und Elektronendichte in der Emitterschicht verbessert; und ein 1:1 Carbazol-zu-Dibenzothiophen-Verhältnis der Bauteilperformance zuträglich ist, da es zu einem Ladungsträgergleichgewicht in der Emitterschicht führt. Diese Arbeit zeigt, unter Verwendung dieser Wirtsmaterialien, blaue FIrpic-basierte phosphoreszierende OLEDs (PhOLEDs) und grüne 4CzIPN-basierte thermisch aktivierte verzögerte Phosphoreszenz (TADF) OLEDs. Die blauen PhOLEDs und grünen TADF OLEDs mit mDCP zeigten Effizienzen von 43 cd/A (18.6%) beziehungsweise 66 cd/A (21%). / A particularly interesting organic light-emitting diodes (OLEDs) design adopts a host-guest strategy by dispersing a small amount of highly efficient emitter (the guest) into an appropriate transport matrix (the host). The host is utilized to transfer excitons to the emitter and to prevent triplet exciton quenching, thus high device performance can be achieved. The present thesis focuses on the relationship between the molecular structure and opto-electrical properties of carbazole/dibenzothiophene derivatives. The investigation encompasses seven of these derivatives for the host, in which the carbazole unit acts as a donor and the dibenzothiophene as an acceptor while they are linked through phenyl spacer(s). This choice of host materials enables to assess the impact of extended phenyl spacers and different acceptor to donor molar ratios. It was found that decreasing the phenyl spacer length enhances the device performance due to the larger both hole and electron densities in the emitting layer; and a 1:1 carbazole to dibenzothiophene ratio is favorable for device performance, since it balances the charge carriers in the emitting layer. Using these host materials, the work presented in this thesis demonstrates high-performance blue FIrpic-based phosphorescent OLEDs (PhOLEDs) and green 4CzIPN-based thermally activated delayed fluorescence (TADF) OLEDs. The blue PhOLEDs and green TADF OLEDs with mDCP showed efficiencies of 43 cd/A (18.6%) and 66 cd/A (21%), respectively.

In this work, a new organic light-emitting device (OLED) structure is proposed that allows light-emission from a metal-free device region, thus reducing the hurdles towards an electrically pumped organic solid state laser (OSL). Our design concept employs a stepwise change from a highly conductive but opaque metal part to a highly transparent but less conductive intrinsic emission layer. Here, the high current densities are localized to an area of a few micrometer in square, which is in the range of the mode volume of the transverse mode of an organic vertical-cavity surface-emitting laser (VCSEL). Besides these experimental results, we present findings from simulations which further support the feasibility of our design concept. Using an equivalent circuit approach, representing the current ow in the device, we calculate the time-dependent length of the emission zone and give estimations for appropriate material parameters.

An electrical driven organic solid state laser is a very challenging goal which is so far well beyond reach. As a step towards realization, we monolithically implemented an Organic Light Emitting Diode (OLED) into a dielectric, high quality microcavity (MC) consisting of two Distributed Bragg Reflectors (DBR). In order to account for an optimal optical operation, the OLED structure has to be adapted. Furthermore, we aim to excite the device not only electrically but optically as well. Different OLED structures with an emission layer consisting of Alq3:DCM (2 wt%) were investigated. The External Quantum Efficiencies (EQE) of this hybrid structures are in the range of 1-2 %, as expected for this material combination. Including metal layers into a MC is complicated and has a huge impact on the device performance. Using Transfer-Matrix-Algorithm (TMA) simulations, the best positions for the metal electrodes are determined. First, the electroluminescence (EL) of the adjusted OLED structure on top of a DBR is measured under nitrogen atmosphere. The modes showed quality factors of Q = 60. After the deposition of the top DBR, the EL is measured again and the quality factors increased up to Q = 600. Considering the two 25-nm-thick-silver contacts a Q-factor of 600 is very high. The realization of a suitable encapsulation method is important. Two approaches were successfully tested. The first method is based on the substitution of a DBR layer with a layer produced via Atomic Layer Deposition (ALD). The second method uses a 0.15-mm-thick cover glass glued on top of the DBR with a 0.23-µm-thick single-component glue layer. Due to the working encapsulation, it is possible to investigate the sample under ambient conditions.

Large area OLEDs show pronounced Joule self-heating at high brightness. This heating induces brightness inhomogeneities, drastically increasing beyond a certain current level. We discuss this behavior considering 'S'-shaped negative differential resistance upon self-heating, even allowing for 'switched-back' regions where the luminance finally decreases (Fischer et al., Adv. Funct. Mater. 2014, 24, 3367). By using a multi-physics simulation the device characteristics can be modeled, resulting in a comprehensive understanding of the problem. Here, we present results for an OLED lighting panel considered for commercial application. It turns out that the strong electrothermal feedback in OLEDs prevents high luminance combined with a high degree of homogeneity unless new optimization strategies are considered.