1 |
Untersuchungen zum Einsatz des Negativresistmaterials SU-8 in der LIGA-TechnikSchütz, Antje. January 2004 (has links) (PDF)
Berlin, Techn. Univ., Diss., 2004. / Computerdatei im Fernzugriff.
|
2 |
Achromatische RöntgenlinsenUmbach, Marion January 2009 (has links)
Zugl.: Karlsruhe, Univ., Diss., 2009 / Hergestellt on demand. - Zusätzliches Online-Angebot unter http://uvka.ubka.uni-karlsruhe.de/shop/isbn/978-3-86644-419-5
|
3 |
Estados Unidos: el fútbol sin riesgoRosales Zavaleta, Raúl 06 February 2017 (has links)
Los negocios en el deporte depende de las condiciones que el entorno les presente (El Comercio).
|
4 |
Governance Talks. La liga femenina desde la mirada del organizador / Governance TalksRosales Zavaleta, Raúl, Echevarría, Guillermo 13 May 2021 (has links)
Moderador: Raúl Rosales Zavaleta - Director de carrera en Administración y Negocios del Deporte /Ponente: Guillermo Echevarría
Sub gerente de la Liga de fútbol profesional
Federación peruana de fútbol
|
5 |
Mecanismos de evasão do sistema complemento por Leptospira ssp.: interação com inibidor de C1 esterase e C4BP. / Immune evasion mechanisms by Leptospiras spp.: interaction with C1 esterase inhibitor and C4b-binding protein.Breda, Leandro Carvalho Dantas 10 April 2014 (has links)
O sistema complemento (SC) é um importante componente da imunidade inata na eliminação de patógenos. Suas proteínas reguladoras são necessárias para controlar a excessiva ativação sobre células próprias. Porém, alguns patógenos ligam a estas proteínas reguladoras para escapar do SC. A Leptospira spp. - agente etiológico do leptospirose - interage com Fator H e C4BP permitindo a evasão ao SC. As regiões SCR 7 e 8 da C4BP são responsáveis pela interação com proteínas LcpA e LigBC, e os SCRs 4, 7 e 8 são responsáveis pela interação com LigAC e L. interrogans íntegra. Estas interaçôes são dependentes de forças iônicas e inibidas por heparina. Outro importante regulador da via clássica e das lectinas é o inibidor de C1 esterase. Observamos sua a interação com leptospira atenuada, patogênica e não patogênica. Ensaios de sobrevivência de leptospira sugerem sua importância na sobrevida de leptospira atenuada, podendo ser utilizado como mecanismo de escape à via clássica e das lectinas do SC, sendo o primeiro mecanismo deste tipo, investigado em leptospiras. / Leptospirosis is a zoonosis caused by bacteria Leptospira. The Complement System plays a crucial role in the immune response against Leptospira. Non-pathogenic leptospira is eliminated by complement while pathogenic is able to avoid complement activation by the acquisition of host complement inhibitors Factor H and C4BP. We verified that SCR 7 and 8 of C4BP alpha chain are responsible to interaction with outer membrane proteins of L. interrogans LcpA and LigBC while SCR 4, 7 and 8 are responsible to interaction with LigAC and L. interrogans. We characterized this protein-protein interaction and verified that is ionic strength dependent and is inhibited by heparin. C1INH, another important regulator of classical and lectin pathways, interacts with the surface of leptospiras pathogenic, non-patogenic and attenuated and it is still able to regulates the classical pathway. We also performed a killing experiment and verified that C1INH is important to the survival of leptospiras attenuated, been the first complement system evasion mechanisms verified at this strain.
|
6 |
Mecanismos de evasão do sistema complemento por Leptospira ssp.: interação com inibidor de C1 esterase e C4BP. / Immune evasion mechanisms by Leptospiras spp.: interaction with C1 esterase inhibitor and C4b-binding protein.Leandro Carvalho Dantas Breda 10 April 2014 (has links)
O sistema complemento (SC) é um importante componente da imunidade inata na eliminação de patógenos. Suas proteínas reguladoras são necessárias para controlar a excessiva ativação sobre células próprias. Porém, alguns patógenos ligam a estas proteínas reguladoras para escapar do SC. A Leptospira spp. - agente etiológico do leptospirose - interage com Fator H e C4BP permitindo a evasão ao SC. As regiões SCR 7 e 8 da C4BP são responsáveis pela interação com proteínas LcpA e LigBC, e os SCRs 4, 7 e 8 são responsáveis pela interação com LigAC e L. interrogans íntegra. Estas interaçôes são dependentes de forças iônicas e inibidas por heparina. Outro importante regulador da via clássica e das lectinas é o inibidor de C1 esterase. Observamos sua a interação com leptospira atenuada, patogênica e não patogênica. Ensaios de sobrevivência de leptospira sugerem sua importância na sobrevida de leptospira atenuada, podendo ser utilizado como mecanismo de escape à via clássica e das lectinas do SC, sendo o primeiro mecanismo deste tipo, investigado em leptospiras. / Leptospirosis is a zoonosis caused by bacteria Leptospira. The Complement System plays a crucial role in the immune response against Leptospira. Non-pathogenic leptospira is eliminated by complement while pathogenic is able to avoid complement activation by the acquisition of host complement inhibitors Factor H and C4BP. We verified that SCR 7 and 8 of C4BP alpha chain are responsible to interaction with outer membrane proteins of L. interrogans LcpA and LigBC while SCR 4, 7 and 8 are responsible to interaction with LigAC and L. interrogans. We characterized this protein-protein interaction and verified that is ionic strength dependent and is inhibited by heparin. C1INH, another important regulator of classical and lectin pathways, interacts with the surface of leptospiras pathogenic, non-patogenic and attenuated and it is still able to regulates the classical pathway. We also performed a killing experiment and verified that C1INH is important to the survival of leptospiras attenuated, been the first complement system evasion mechanisms verified at this strain.
|
7 |
LIGA cavity resonators and filters for microwave and millimetre-wave applicationsMa, Zhen 06 December 2007
High performance microwave cavities for various circuits in the front-end of transceivers such as filters, diplexers, and oscillators have conventionally been built with rectangular or
cylindrical metallic waveguides, which typically have low loss, high quality (Q) factor, and higher power handling capability. However such waveguide cavity based circuits made by traditional metal machining techniques tend to be costly, particularly for complex multiple cavity based circuits, and not well suited to high volume commercial applications and integration with planar microwave integrated circuits. As commercial transceiver applications progress toward higher microwave and millimetre-wave frequencies, the use of waveguide based circuits for compact, highly integrated transceivers is becoming feasible, along with an increasing need for cost effective batch fabrication processes for realizing complex metallic cavity circuits without sacrificing structural quality and performance. It is expected that significant advancements in both microwave performance and integration will be achieved through the development of novel technologies for realizing vertically oriented three-dimensional (3-D) structures.<p>Although improvement has been made on increasing the resonator Q factor by exploiting silicon micromachining and low-temperature cofired ceramics (LTCC) techniques, there are some drawbacks inherent to silicon cavity micromachining and LTCC technology, including non-vertical sidewalls, depth limitations, and surface roughness for the silicon resonator, and dielectric and radiation loss for LTCC resonator.<p>Polymer-based fabrication is a promising alternative to silicon etching and LTCC technologies for the batch fabrication of ultra-deep microwave cavity structures. In particular, deep X-ray lithography (XRL), as part of the LIGA process, is a microfabrication technology for precisely structuring polymers, and is increasingly being applied to RF/microwave microstructures. In addition to precise patterning capabilities, deep XRL is able to structure ultra-deep cavities due to the penetration ability of hard X-rays. Cavities of several millimetres are possible in a single lithographic exposure, and with excellent sidewall quality, including verticality near 90 degrees and surface roughness on the order of tens of nanometres. These structured polymers are subsequently used as electroforming templates for fabricating metal structures with correspondingly good sidewall quality.<p>This thesis investigates the possibility of realizing high-Q cavity resonators and filters at microwave frequencies using the LIGA microfabrication process. Finite element method (FEM) electromagnetic simulation results based on the cavity models representing different fabrication conditions show that smooth LIGA cavity structures result in promising Q improvement over silicon and LTCC structures. And the potential advantages of LIGA resonators are more dramatic with cavity height and increasing operating frequency. Deep polymer cavity structures (1.8 mm) fabricated using deep XRL demonstrate excellent sidewall verticality in the PMMA structure, with only slight shrinkage at the top surface of 8.5 2.5 mm in either lateral dimensions. This corresponds to sidewalls with verticality between 89.82o and 89.9o. The structure polymers are subsequently used as templates for metal electroforming to produce cavity resonators. The performance of the resonator is measured in a planar environment. A RT/duroid6010 soft substrate patterned with coupling structures forms the sixth side, and thus completes the cavity. Despite the rather crude test assembly for the sixth side made by clamping, the measured resonator has a high unloaded Q of 2122.2 85 at the resonant frequency of 24 GHz, indicating that LIGA cavities are especially promising for high performance applications. <p>The relatively simple, single-step lithographic exposure also facilitates extension to more structurally complicated waveguide and multiple cavity-based circuits. This research work also proposes a high performance ``split-post' 3-pole cylindrical post coupled Chebyshev bandpass filter suitable for LIGA fabrication. In addition to potentially batch fabricating such a filter lithographically by exposing the entire waveguide depth in a single exposure, the filter structures composed of three cavities with metallic multi-post coupling would be extremely difficult to fabricate using traditional machining techniques, due to the extremely fine post structure and high vertical aspect ratio required. However, these types of structures could be ideal for LIGA fabrication, which offers sub-micron features, aspect ratios of 100:1 or higher, resist thicknesses of up to 3 mm, and almost vertical and optically smooth sidewalls. Also, representative LIGA sidewall roughness is used to predict very low loss and high performance, suggesting that complicated structures with multiple resonator circuits and high internal components with high aspect ratios are possible.
|
8 |
Modeling and analysis of thick suspended deep x-ray liga inductors on CMOS/BiCMOS substrateYu, Xiaoyang 02 August 2006
Modeling and simulation results for two types of 150 μm height air suspended inductors proposed for LIGA fabrication are presented. The inductor substrates used model the TSMC 0.18 μm CMOS/BiCMOS substrates. The RF performance between the suspended structure and the unsuspended counterpart are compared and the advantage of the suspended structures is explored. The potential of LIGA for fabricating high suspended inductors with good performance and for combining these with CMOS/BiCMOS is demonstrated.
|
9 |
Modeling and analysis of thick suspended deep x-ray liga inductors on CMOS/BiCMOS substrateYu, Xiaoyang 02 August 2006 (has links)
Modeling and simulation results for two types of 150 μm height air suspended inductors proposed for LIGA fabrication are presented. The inductor substrates used model the TSMC 0.18 μm CMOS/BiCMOS substrates. The RF performance between the suspended structure and the unsuspended counterpart are compared and the advantage of the suspended structures is explored. The potential of LIGA for fabricating high suspended inductors with good performance and for combining these with CMOS/BiCMOS is demonstrated.
|
10 |
LIGA cavity resonators and filters for microwave and millimetre-wave applicationsMa, Zhen 06 December 2007 (has links)
High performance microwave cavities for various circuits in the front-end of transceivers such as filters, diplexers, and oscillators have conventionally been built with rectangular or
cylindrical metallic waveguides, which typically have low loss, high quality (Q) factor, and higher power handling capability. However such waveguide cavity based circuits made by traditional metal machining techniques tend to be costly, particularly for complex multiple cavity based circuits, and not well suited to high volume commercial applications and integration with planar microwave integrated circuits. As commercial transceiver applications progress toward higher microwave and millimetre-wave frequencies, the use of waveguide based circuits for compact, highly integrated transceivers is becoming feasible, along with an increasing need for cost effective batch fabrication processes for realizing complex metallic cavity circuits without sacrificing structural quality and performance. It is expected that significant advancements in both microwave performance and integration will be achieved through the development of novel technologies for realizing vertically oriented three-dimensional (3-D) structures.<p>Although improvement has been made on increasing the resonator Q factor by exploiting silicon micromachining and low-temperature cofired ceramics (LTCC) techniques, there are some drawbacks inherent to silicon cavity micromachining and LTCC technology, including non-vertical sidewalls, depth limitations, and surface roughness for the silicon resonator, and dielectric and radiation loss for LTCC resonator.<p>Polymer-based fabrication is a promising alternative to silicon etching and LTCC technologies for the batch fabrication of ultra-deep microwave cavity structures. In particular, deep X-ray lithography (XRL), as part of the LIGA process, is a microfabrication technology for precisely structuring polymers, and is increasingly being applied to RF/microwave microstructures. In addition to precise patterning capabilities, deep XRL is able to structure ultra-deep cavities due to the penetration ability of hard X-rays. Cavities of several millimetres are possible in a single lithographic exposure, and with excellent sidewall quality, including verticality near 90 degrees and surface roughness on the order of tens of nanometres. These structured polymers are subsequently used as electroforming templates for fabricating metal structures with correspondingly good sidewall quality.<p>This thesis investigates the possibility of realizing high-Q cavity resonators and filters at microwave frequencies using the LIGA microfabrication process. Finite element method (FEM) electromagnetic simulation results based on the cavity models representing different fabrication conditions show that smooth LIGA cavity structures result in promising Q improvement over silicon and LTCC structures. And the potential advantages of LIGA resonators are more dramatic with cavity height and increasing operating frequency. Deep polymer cavity structures (1.8 mm) fabricated using deep XRL demonstrate excellent sidewall verticality in the PMMA structure, with only slight shrinkage at the top surface of 8.5 2.5 mm in either lateral dimensions. This corresponds to sidewalls with verticality between 89.82o and 89.9o. The structure polymers are subsequently used as templates for metal electroforming to produce cavity resonators. The performance of the resonator is measured in a planar environment. A RT/duroid6010 soft substrate patterned with coupling structures forms the sixth side, and thus completes the cavity. Despite the rather crude test assembly for the sixth side made by clamping, the measured resonator has a high unloaded Q of 2122.2 85 at the resonant frequency of 24 GHz, indicating that LIGA cavities are especially promising for high performance applications. <p>The relatively simple, single-step lithographic exposure also facilitates extension to more structurally complicated waveguide and multiple cavity-based circuits. This research work also proposes a high performance ``split-post' 3-pole cylindrical post coupled Chebyshev bandpass filter suitable for LIGA fabrication. In addition to potentially batch fabricating such a filter lithographically by exposing the entire waveguide depth in a single exposure, the filter structures composed of three cavities with metallic multi-post coupling would be extremely difficult to fabricate using traditional machining techniques, due to the extremely fine post structure and high vertical aspect ratio required. However, these types of structures could be ideal for LIGA fabrication, which offers sub-micron features, aspect ratios of 100:1 or higher, resist thicknesses of up to 3 mm, and almost vertical and optically smooth sidewalls. Also, representative LIGA sidewall roughness is used to predict very low loss and high performance, suggesting that complicated structures with multiple resonator circuits and high internal components with high aspect ratios are possible.
|
Page generated in 0.0801 seconds