L'objectif est l'étude de la corrosion et de l'usure des pinces à couper les ligatures au cours des cycles de stérilisation en respectant les normes concernant l'inactivation du prion. Le matériel consiste en 3 lots de 25 pinces à couper les ligatures à mors rapportés provenant de 3 fournisseurs différents (Dentaurum®, ETM® et RMO®), du fil de ligature de diamètre .010 pouces, soit 0,25mm, en acier inoxydable, et enfin 5 produits de prédésinfection (Ampholysine Plus®, Elusept®, Dy Septi®, Prédolyse®, Dentasept Ultra®). Après caractérisation des pinces (étude de la composition, de la dureté, et de la structure) puis des produits de prédésinfection (étude de la composition et du pH) la susceptibilité à la corrosion de chaque partie de ces pinces a été analysée, avec réalisation de couplages galvaniques de ces différents éléments. Le comportement électrochimique des pinces dans leur globalité a été étudié par immersion dans les différents produits de prédésinfection, ainsi que l'usure et l'apparition de traces de corrosion, ceci au fur et à mesure des cycles de stérilisation. L'observation des pinces a mis en évidence de faibles modifications aussi bien en termes de corrosion que d'usure. Quelque soit la marque des pinces, ou le produit de prédésinfection, la résistance au cours des cycles de stérilisation est satisfaisante. / The aim of this work was to assess the effect of sterilization on ligature-cutting pliers, and more specifically the corrosion and wear of the plier's cutting edges, while respecting prion inactivation norms. Material included one set of 25 ligature-cutting pliers supplied by three major orthodontic distributors (Dentaurum®, ETM® and RMO®), .010 inch stainless steel orthodontic ligature wire and five disinfecting agents (Ampholysine Plus®, Elusept®, Dy Septi®, Prédolyse®, Dentasept Ultra®). Pliers (chemical composition, Vickers hardness, crystalline network) and disinfecting agents (chemical composition, pH) were initially characterized. Corrosion susceptibility of each single part of the different pliers was then analyzed, and galvanic coupling performed. Electrochemical behaviors of the whole pliers were studied by immersion in the various disinfecting agents. The pliers corrosion and wear were also observed with increasing number of sterilization cycles. Resistance to corrosion during sterilization cycles was found to be satisfactory, all pliers and disinfecting agents included.

Magister Chirurgiae Dentium - MChD (Orthodontics) / The aim of the study is to compare the frictional resistance generated between two types of self-ligating brackets; Smart-Clip Metal SL (3M Unitek) and Damon Clear SL (Ormco), with conventional stainless steel brackets, Victory Series (3M Unitek) when coupled with various stainless steel and nickel-titanium archwires. Materials and Methods: All brackets had a 0.022" slot and tested using three archwires: 0.016" nickel-titanium, 0.019 x 0.025" nickel-titanium and 0.019 x 0.025" stainless steel archwires. Friction was evaluated for the upper right quadrant of the typodont. For each testing procedure, new brackets and archwire was employed to eliminate the influence of wear. Results: The mean results showed that the Smart-Clip self-ligating brackets generated significantly lower friction than both the Damon Clear self-ligating brackets and Victory Series brackets. However, the analysis of the various bracket-archwire combinations displayed that Damon Clear SL brackets generated the lowest friction when tested with 0.016" round nickeltitanium archwire and significantly higher friction than Smart-Clip and Victory Series brackets when tested with 0.019 x 0.025" stainless steel rectangular archwires. All brackets showed higher frictional forces as the wire size increased. Clinical relevance: The production of high levels of friction during orthodontic sliding mechanics presents a clinical challenge to the orthodontists. The generation of high levels of friction may reduce the effectiveness of the mechanics, decrease tooth movement efficiency and further complicate anchorage control. The amount of friction is variable in the orthodontic system and can be altered somewhat by the orthodontist's choices.

Submitted by isabela.moljf@hotmail.com (isabela.moljf@hotmail.com) on 2017-05-22T11:28:08Z No. of bitstreams: 1 adrianaalvessilva.pdf: 479342 bytes, checksum: e8874dc2bfd843cc66a19f10a9099d36 (MD5) / Approved for entry into archive by Adriana Oliveira (adriana.oliveira@ufjf.edu.br) on 2017-05-22T17:19:25Z (GMT) No. of bitstreams: 1 adrianaalvessilva.pdf: 479342 bytes, checksum: e8874dc2bfd843cc66a19f10a9099d36 (MD5) / Made available in DSpace on 2017-05-22T17:19:25Z (GMT). No. of bitstreams: 1 adrianaalvessilva.pdf: 479342 bytes, checksum: e8874dc2bfd843cc66a19f10a9099d36 (MD5) Previous issue date: 2008-02-20 / Muitos estudos têm avaliado o comportamento das ligaduras elásticas em relação às suas propriedades físicas. No entanto, a biocompatibilidade destes materiais não se apresenta bem documentada na literatura. O presente estudo teve como objetivo avaliar, in vitro, a viabilidade celular de macrófagos murinos J774 na presença de ligaduras elásticas de diferentes marcas e cores e, analisar o efeito destas ligaduras na produção de óxido nítrico (NO) produzido por estas células, com e sem ativação de interferon-gama (IFN-γ), uma citocina pró-inflamatória. Para cada tempo estudado, foram utilizados 6 elos de ligaduras elásticas de 3 marcas diferentes (Morelli, GAC e TP) nas cores prata e transparente após esterilização com óxido de etileno. As placas de cultura de 96 poços, utilizadas no experimento, foram divididas em 2 metades. A primeira foi preenchida pelas células J774 resuspensas em meio RPMI suplementado juntamente com os elos de cada tipo de ligadura e células controle. A segunda metade foi completada com outros 6 elos dos mesmos tipos de ligaduras mantidos em culturas juntamente com 10μl de IFN—γ (5 ng/ml) e grupo controle. As placas foram incubadas em diferentes intervalos de tempo: 24, 48 e 72 horas. As células foram submetidas à avaliação da viabilidade celular através da técnica do MTT [3 – (4,5-dimethylthiazol-2-yl) – diphenyl tetrazolium bromide] e os sobrenadantes foram coletados para a análise da produção de NO, utilizando-se o método de Griess. Para análise dos resultados foram utilizados os testes de Kruskal-Wallis e Mann-Whitney. Na ausência do estímulo (IFN—γ), a viabilidade celular nos grupos de ligaduras foi maior no período final da avaliação em relação ao grupo controle. No entanto, 3 grupos de ligaduras (Morelli prata, Morelli transparente e GAC prata) exibiram proliferação significativa em 72 horas. As ligaduras da marca TP Orthodontics (prata e transparente) não influenciaram de forma significativa a viabilidade celular e a produção de NO. Embora a ligadura Morelli prata tenha estimulado as células J774 a realizarem uma maior produção de NO, os outros tipos de ligaduras nos diferentes tempos avaliados não apresentaram diferenças significativas na produção de óxido nítrico em relação às células controle. Na presença do IFN-γ, houve uma redução significativa da viabilidade celular no tempo 48 horas para o grupo das ligaduras Morelli e GAC. Entretanto, uma média de viabilidade superior ao apresentado pelas células controle foi observada em todos os grupos de ligaduras no tempo 72 horas, sendo significativa para o grupo das ligaduras GAC transparente. O grupo das ligaduras TP foi o que apresentou comportamento semelhante ao grupo controle, apesar das ligaduras TP prata terem apresentado menor viabilidade em 24 horas. O IFN-γ proporcionou aumento significativo na produção de NO em todos os grupos no período final em relação ao inicial. As ligaduras Morelli transparente e GAC (prata e transparente) demonstraram a menor produção desta molécula nos 3 tempos analisados. / Although the physical properties of elastic ligatures have been the subject of several studies, the biocompatibility of these materials has not been well documented in the literature. This study was an in vitro investigation of the cellular viability of the murine macrophage J774 cell line in the presence of elastomeric ligatures of different brands and colors, and of nitric oxide (NO) production of these cells both, under the presence of such ligatures, and under the influence of a proinflammatory cytokine: gamma-interferon. After sterilization with ethylene oxide, 6 chains of ligatures of 3 different brands (Morelli, GAC e TP) and colors (silver and transparent) were used at each study time. The 96-well culture plates used in the experiment were divided in 2 halves. The first was filled with J774 cells resuspended in supplemented RPMI medium, along with the chains of each kind of ligature and control cells. The second half was filled with another 6 chains of the same kinds of ligatures, kept in J774 cell cultures in supplemented RPMI medium, along with 10μl of IFN-γ (5 ng/ml) and control cells. The plates were incubated at 24, 48, and 72 hours. The MTT [3 – (4,5-dimethylthiazol-2-yl) – diphenyl tetrazolium bromide] technique was used for cellular viability assessment, and the supernatants were collected for NO production analysis with the Griess method. Kruskal-Wallis and Mann-Whitney tests were used to analyze the results. Cellular viability in the elastomeric groups was higher at the final time point in relation to the control group. However, 3 elastomeric groups (silver Morelli, transparent Morelli and silver GAC) showed significant proliferation after 72 hours. TP-ligature-exposed cells had the same behavior of controls, no significant changes in cellular viability and NO production being found. Although silver Morelli ligatures led to higher NO production, the other types of ligatures did not significantly affect NO production, as compared to control cells. In the presence of IFN-γ, Morelli and GAC ligatures led to a significant reduction of cellular viability after 48 hours. Yet a viability mean higher than that seen in control cells was observed for all ligatures after 72 hours, with transparent GAC showing significant proliferation. Cells exposed to TP ligatures had the same behavior of controls, although silver TP ligatures led to lower viability at 24 hours. Nitric oxide production was significantly greater in all groups at the final time point in relation to the initial time point. The transparent Morelli and silver and transparent GAC showed the smallest NO production at the 3 study time points.

The research question of this study is to determine what circumstances and conditions contribute to deaths in police cells. The study was undertaken in order to establish the causes of deaths in police cells and the factors which contribute thereto, as well as to determine the best international practices to prevent deaths in police cells. The literature was reviewed in order to establish the extent to which this phenomenon has been researched in South Africa and in other countries and to determine the regulatory framework related thereto. The researcher had collected data from the dockets relating to deaths in police cells which were kept at the IPID provincial offices in Gauteng and Limpopo. The data were collected by using the docket analysis schedule and were categorised into themes during the analysis process. Four cause of deaths in police cells were identified, namely, suicide, natural causes, assault by fellow detainees and injuries which were sustained prior to detention. Suicide is the leading cause of deaths. The second leading causes of deaths in police cells are natural causes and assault by fellow detainees. Deaths as a result of injuries sustained prior to detention came third. The most common ligatures which were used to commit suicide are shoe-laces, belts and strips torn from clothing and bedding items. The preferred ligature points are the burglar proof bars on cell windows. Booted feet and hands were the most common instruments used to inflict fatal injuries on the detainees. It was also found that police officials are generally not complying fully with the standing orders which regulate the management of people who are detained in police cells. The failure of police officials to comply fully with the standing orders on custody in police cells contributed to the deaths of detainees in police cells. Recommendations are made to prevent the deaths of detainees in police cells. / Police Practice / M. Tech. (Policing)

No description available.

The research question of this study is to determine what circumstances and conditions contribute to deaths in police cells. The study was undertaken in order to establish the causes of deaths in police cells and the factors which contribute thereto, as well as to determine the best international practices to prevent deaths in police cells. The literature was reviewed in order to establish the extent to which this phenomenon has been researched in South Africa and in other countries and to determine the regulatory framework related thereto. The researcher had collected data from the dockets relating to deaths in police cells which were kept at the IPID provincial offices in Gauteng and Limpopo. The data were collected by using the docket analysis schedule and were categorised into themes during the analysis process. Four cause of deaths in police cells were identified, namely, suicide, natural causes, assault by fellow detainees and injuries which were sustained prior to detention. Suicide is the leading cause of deaths. The second leading causes of deaths in police cells are natural causes and assault by fellow detainees. Deaths as a result of injuries sustained prior to detention came third. The most common ligatures which were used to commit suicide are shoe-laces, belts and strips torn from clothing and bedding items. The preferred ligature points are the burglar proof bars on cell windows. Booted feet and hands were the most common instruments used to inflict fatal injuries on the detainees. It was also found that police officials are generally not complying fully with the standing orders which regulate the management of people who are detained in police cells. The failure of police officials to comply fully with the standing orders on custody in police cells contributed to the deaths of detainees in police cells. Recommendations are made to prevent the deaths of detainees in police cells. / Police Practice / M. Tech. (Policing)