This master´s thesis is concerning the problem of manufacturing technology of the metal shim, which is a part of automobile brake mechanism. Shim will be made of the S460MC steel and the expected production series is 800 000 pieces per year. This quantity, demanded quality and accuracy of blank are the main reasons for application of fineblanking technology process with pressure edge. The blank will be making by triple–action press produced by Feintool, marked HFAplus4500LT. This press produces two blanks per one action.

The thesis is focused on studying deformation of the circular holes in the limit bending space, depending on the material type, distance from bend, the thickness of material and diameter of hole. After analyzing all necessary technological parameters was bending technology on press brake selected. An experiment for which the tools and press brake Trumpf TruBend 5170 were selected was designed and performed. Samples for the study were designed, bent and measured. The charts have been prepared for practical use in the company from measuring. In addition, simulations were processed in Ansys program and graphs were compiled to compare the main effect of the hole deformations. Two methods were chosen to prevent deformation in limit bending space. Under-cutting method by laser and method of using special Rollbend tool. In the end, economic studies for the Rollbend tool were developed instead of under-cutting hole with grinding.

This thesis presents a tool design for production of embossments into the bottom part of the agricultural silo made of Dx51D material. The research analysis all technologies used for embossing, that is cutting and shallow drawing. This is followed by a chapter on simulation. The tool design itself is described. Its principle is based on tools for punching machines. The upper half of the tool is composed of a weldment to be clamped into pressing machine, into which are mounted functional parts in the form of inserts. The lower tool consists of several bolted plates, punches and a holding plate, which is located on the springs. In order to achieve correct design, necessary calculations were carried out and it was all confirmed by simulation in ANSYS. The two tool halfs are guided by pins attached at the edges of the lower tool. The technical - economical evaluation compares the work of the proposed tool with other possibilities of embossing.

This thesis deals with the design and implementation of the ISA-95 standard on a newly created production line. The standard and its models are described in the theoretical part, following with the individual selected software solutions, which were used for the standard’s application. Subsequently, a description of the construction and program tools of both devices, which by physical arrangement and their connection create the production line, is provided. The next part of the thesis deals with the design and application of a batch control process. This is the basis for an ISA-95 standard implementation, which uses specific software resources for data acquisition and visualization. A functional verification of the production line and realized design was done within the last part. The conclusion presents an evaluation of production based on analyzed data from the test production.

The diploma thesis deals with suggestion of low alloy 14220.0, produced by solid forming. This suggestion is based on the size of series that contain 100 000 pieces a year. The essay contains knowledge refering to drop forging technology and comparison with existing technologies. Two suitable variants of production were assessed, these variants are drop forging with hammers and vertical forging press. Both theories were theoretically analised in order to describe given technology. The analysis also contains calculation and suitable machine choice. Drop filling on vertical forging presses was chosen because of forging type. Furthemore forging proposition was treated including production technique. The chosen variant contains calculation, suggestion of a die, machine that was used and suggestion of flash trimming. For suggested technology was chosen vertical press LZK 3150 B. Its producer is Šmeral a.s. Brno. This project also contains technical drawings of the given component, forge, dies and phase of forging.

The disertation is focused to the technology of fineblanking. It is concerned to a production of part, which will be used as a mechanism for changing the position of seats in cars. The expected production series is 800.000 pieces per year. With reference to the quantity and demanded quality and also accuracy of blank is choosed precisely technology of fineblanking process with pressure edge. The part will be produced on triple-action press produced by Feintool AG Lyss. It is press GKP – F 160 with mechanical-hydraulic drive. This press and specialy create blanking tool produces two blanks per one action.

PFEIFER František: Production of support by solid forming. A Graduation Thesis of Master´s Studies, the 5th Year of Study, the School-year 2008/2009, FSI VUT Brno, Department of Machining, May 2009, Pages No. 94, Pictures No. 37, Tables No. 3, Appendixes No. 13. The Graduation Thesis, elaborated in the framework of engineering studies, presents the production technology of support component from steel ČSN 12 010. A material is a rod of the 130 – 251 ČSN 42 5510. A yearly production is 95 000 pieces. Based on the studies of possible production technologies was proposed the technology of production by the vertical forging press LMZ 6500B (Šmeral Brno a. s.) with a nominal forming power of 65 MN, flash and pellicle trimming on a trimming press with a nominal power of 8 MN. For this option, the required technological calculations, the design of the die, the specification of production machines and a simulation forming process which is made in the software QFORM have been carried out.

This master´s thesis submit a project of technology of production of gear wheel the way of drop forging. A part is made of steel 14 220.0 (16MnCr5). A semi-product is a stick of parametres o75 - 211 ČSN EN 10060, with a production of 130 000 pieces a year. Technological process of drop forging are worked up based on a study presented in technical literature. A forging will be working up on a vertical forging press LMZ 1600 A made in Šmeral Brno, Inc. For this option, the required technological calculation, drawing documentation and forming process simulation which is implemented by way of the software FormFEM have been carried out. Technical and economical evaluation of the component technology producing is brought in as a conclusion of the thesis.

This diploma thesis deals with project of shaft manufacturing using drop forging technology. This technology is manufacturing using cubic forming on vertical forging press. Work includes detail data for working out technical drawings of suggested component. Thanks to modification of parameters and forging a whole we reduce material waste which is compared to turning technology. Production process is adapted to established production process in company Kovarna ZETOR Brno. Further the work includes cost price of one forging from the set of 30 000 products a year. The work also contains background research of drop forging technology, technical drawings, production process list and simulation outcome for drop forging of the suggested komponent by software FormFEM.

Propose of this thesis is designing production technology of reducing part of tube. The production of requested part is designed on the base of calculations and simulation in one operation. This operation contains widening and squeezing. There is designed on the base of calculations a tool fixed in hydraulic press ZHW 40 for the production. To prepare a semi-product is used cutting by slitting saw.