The goal of this research was to utilize the morphological control inherently imparted by the electrospinning process to improve the active layer performance in energy conversion devices as well as to better understand the relationship between morphology and performance in energy storage devices. Discrete control of the active layer morphology can promote exciton dissociation in organic photovoltaic cells (OPVs), whereas developing efficient ion diffusion pathways and beneficial polymer-ion interaction in polymer-gel electrolytes is demonstrated to result in enhanced battery performance. We demonstrate the ability to develop unique morphologies in Poly(3-hexafluoro propylene) (P3HT) films with energy storage applications using various electrospinning techniques. Electrospinning in a solvent-saturated atmosphere allows for the design of ribbon architectures with polymer domains on the order of 5-10 um. These ribbon structures form what appear to be bi-continuous films, which could then be filled with an acceptor / fullerene type material to create a bulk heterojucton for OPV devices. Dropping chloroform onto the electrospinning needle during the spinning process results in P3HT fibers with porous surfaces. These fibers have diameters of ~ 2 um. Using a coaxial needle to electrospin a P3HT solution in the core, and a CHCl3 sheath solution created hybrid ribbon-fiber structures. These structures have even smaller domain sizes than the ribbons created using a solvent saturated atmosphere. Cospinning P3HT with sacrificial polymers results in P3HT fiber morphologies upon removal of the sacrificial template polymer. Additionally, introducing P3HT into an established fiber matrix results in fibrous P3HT architectures after the template fibers are removed. Developing hybrid polymer-gel electrolytes using crosslinked PEO electrospun fibers results in membranes with high affinity for liquid electrolyte components. These electrospun PEO fiber mats exhibit excellent ionic conductivities at room temperature (12 mS/cm) exceeding an electrospun PVDF control. Furthermore, the PEO fiber mats can absorb nearly three times as much liquid electrolyte as the PVDF control. PEO has been show to interact with lithium salts to aid in dissociation and diffusion during battery cycling. Although the ionic conductivity data suggest PEO to be a superior electrolyte, pulsed-field-gradient NMR shows that lithium diffusion is faster in PVDF samples. From coin cell discharge experiments, PEO is believed to interact strongly with Li+ ions, inhibiting them from diffusing rapidly during fast charge/discharge rates. However, PEO/PETA fiber electrolytes show nearly 100% theoretical capacity discharge at C/100 and a capacity retention of ~ 35% at a C/5 discharge rate in contrast to a glass fiber separator which shows only a capacity that is approximately 85% of the theoretical value. The unique mechanical properties of PEO/PETA electrospun mats could lead to interesting artificial skin and wound healing applications. Upon crosslinking at elevated temperatures (~40 degrees C), the fiber mats exhibit improved tensile strength and much higher ultimate stress at break. The porous nature of the materials lend to easy oxygen diffusion for wound healing, and the hydrophilicity promotes continued adhesion to existing tissue making these mats possible adhesive-less bandages. / Ph. D.

<p>Proton exchange membrane fuel cells and lithium polymer batteries are important as future power sources in electronic devices, vehicles and stationary applications. The development of these power sources involves finding and characterising materials that are well suited r the application.</p><p>The materials investigated in this thesis are the perfluorosulphonic ionomer Nafion^TM(DuPont) and metal oxides incorporated into the membrane form of this material. The ionomer is used as polymer electrolyte in proton exchange membrane fuel cells (PEMFC) and the metal oxides are used as cathode materials in lithium polymer batters (LPB).</p><p>Crystallinity in cast Nafion films can be introduced by ion beam exposure or aging. Spectroscopic investigations of the crystallinity of the ionomer indicate that the crystalline regions contain less water than amorphous regions and this could in part explain the drying out of the polymer electrolyte membrane in a PEMFC.</p><p>Spectroscopic results on the equilibrated water uptake and the state of water in thin cast ionomer films indicate that there is a full proton transfer from the sulphonic acid group in the ionomer when there is one water molecule per sulphonate group.</p><p>The LPB cathode materials, lithium manganese oxide and lithium cobalt oxide, were incorporated <i>in situ</i> in Nafion membranes. Other manganese oxides and cobalt oxides were incorporated <i>in situ</i> inside the membrane. Ion-exchange experiments from HcoO₂to LiCoO₂within the membrane were also successful.</p><p>Fourier transform infrared spectroscopy, Raman spectroscopy and X-ray diffraction were used for the characterisation of the incorporated species and the Nafion film/membrane.</p>

Proton exchange membrane fuel cells and lithium polymer batteries are important as future power sources in electronic devices, vehicles and stationary applications. The development of these power sources involves finding and characterising materials that are well suited r the application. The materials investigated in this thesis are the perfluorosulphonic ionomer NafionTM (DuPont) and metal oxides incorporated into the membrane form of this material. The ionomer is used as polymer electrolyte in proton exchange membrane fuel cells (PEMFC) and the metal oxides are used as cathode materials in lithium polymer batters (LPB). Crystallinity in cast Nafion films can be introduced by ion beam exposure or aging. Spectroscopic investigations of the crystallinity of the ionomer indicate that the crystalline regions contain less water than amorphous regions and this could in part explain the drying out of the polymer electrolyte membrane in a PEMFC. Spectroscopic results on the equilibrated water uptake and the state of water in thin cast ionomer films indicate that there is a full proton transfer from the sulphonic acid group in the ionomer when there is one water molecule per sulphonate group. The LPB cathode materials, lithium manganese oxide and lithium cobalt oxide, were incorporated in situ in Nafion membranes. Other manganese oxides and cobalt oxides were incorporated in situ inside the membrane. Ion-exchange experiments from HcoO2 to LiCoO2 within the membrane were also successful. Fourier transform infrared spectroscopy, Raman spectroscopy and X-ray diffraction were used for the characterisation of the incorporated species and the Nafion film/membrane.