Global ETD Search

1	Ermüdung des Verbundes von Stahlbeton unter Querzug / Bond fatigue in reinforced concrete under transverse tension Lindorf, Alexander 28 February 2012 (has links) (PDF) Im Mittelpunkt der vorliegenden Arbeit steht die gezielte Analyse des Verbundverhaltens zwischen Bewehrungsstahl und Beton unter kombinierter Beanspruchung aus Ermüdung und Querzug. Den Hintergrund bilden Stahlbetonbauteile, wie z. B. Fahrbahnplatten von Verbundbrücken, welche einen zweiaxialen Lastabtrag unter nicht vorwiegend ruhenden Belastungen aufweisen. Die Untersuchungen für normal- und hochfesten Beton erfolgten an Ausziehkörpern mit einem durch Querzugspannungen hervorgerufenen Längsriss entlang des Bewehrungsstabes. Das Versuchsprogramm beinhaltete hochzyklische Schwellversuche mit unterschiedlichen Schwingspielen und variierenden Längsrissbreiten bis zu einer Million Lastwechseln. Anhand der Entwicklung des Schlupfes zwischen Bewehrungsstab und Beton konnte eine deutliche Abhängigkeit des Verbundwiderstandes vom Querzug beobachtet werden. Aufbauend auf der Schlupfentwicklung erfolgt die Ableitung von normierten Wöhlerlinien der Verbundermüdung. Diese Wöhlerlinien können direkt in Beziehung zu den Wöhlerlinien der Betonstahlermüdung gesetzt werden und vereinfachen die Erstellung von Dauerfestigkeitsdiagrammen für Bemessungszwecke. Es wird deutlich, dass die Ermüdungsfestigkeit des Verbundes durch das Vorhandensein eines Längsrisses gegenüber der Betonstahlermüdung verstärkt an Bedeutung gewinnt. / The main focus of the present work is the specific analysis of the bond behaviour between reinforcement and concrete under combined loading due to fatigue and transverse tension. The background is formed by reinforced concrete elements such as bridge decks of steel-concrete composite bridges, which show a biaxial load bearing behaviour under not predominantly monotonic loading. The investigations for both normal strength and high performance concrete were conducted on pull-out specimens with a longitudinal crack along the reinforcing bar caused by transverse tensile stresses. The experimental program included high cyclic tests with different stress ranges and varying longitudinal crack widths up to one million load cycles. By means of the slip development, a definite dependency of the bond strength on the transverse tension could be observed. Based on the slip development, normalised S-N curves for bond fatigue have been deduced. These S-N curves can be set in direct relation to the S-N curves for steel fatigue and simplify creating constant life diagrams for design purposes. It becomes clear that the bond fatigue strength, due to an existing longitudinal crack, gains in importance in comparison to the fatigue strength of the reinforcing steel. Verbundverhalten Ausziehversuch Querzug Ermüdung des Verbundes hochzyklische Belastung Längsrissbildung Wöhlerlinien Schwellbelastung Schlupfentwicklung Bond behaviour Pull-out test Transverse tension Fatigue of bond High cyclic loading Longitudinal cracking S-N curves Repeated loading Slip development ddc:690 rvk:ZI 7130
2	Ermüdung des Verbundes von Stahlbeton unter Querzug Lindorf, Alexander 01 December 2011 (has links) Im Mittelpunkt der vorliegenden Arbeit steht die gezielte Analyse des Verbundverhaltens zwischen Bewehrungsstahl und Beton unter kombinierter Beanspruchung aus Ermüdung und Querzug. Den Hintergrund bilden Stahlbetonbauteile, wie z. B. Fahrbahnplatten von Verbundbrücken, welche einen zweiaxialen Lastabtrag unter nicht vorwiegend ruhenden Belastungen aufweisen. Die Untersuchungen für normal- und hochfesten Beton erfolgten an Ausziehkörpern mit einem durch Querzugspannungen hervorgerufenen Längsriss entlang des Bewehrungsstabes. Das Versuchsprogramm beinhaltete hochzyklische Schwellversuche mit unterschiedlichen Schwingspielen und variierenden Längsrissbreiten bis zu einer Million Lastwechseln. Anhand der Entwicklung des Schlupfes zwischen Bewehrungsstab und Beton konnte eine deutliche Abhängigkeit des Verbundwiderstandes vom Querzug beobachtet werden. Aufbauend auf der Schlupfentwicklung erfolgt die Ableitung von normierten Wöhlerlinien der Verbundermüdung. Diese Wöhlerlinien können direkt in Beziehung zu den Wöhlerlinien der Betonstahlermüdung gesetzt werden und vereinfachen die Erstellung von Dauerfestigkeitsdiagrammen für Bemessungszwecke. Es wird deutlich, dass die Ermüdungsfestigkeit des Verbundes durch das Vorhandensein eines Längsrisses gegenüber der Betonstahlermüdung verstärkt an Bedeutung gewinnt. / The main focus of the present work is the specific analysis of the bond behaviour between reinforcement and concrete under combined loading due to fatigue and transverse tension. The background is formed by reinforced concrete elements such as bridge decks of steel-concrete composite bridges, which show a biaxial load bearing behaviour under not predominantly monotonic loading. The investigations for both normal strength and high performance concrete were conducted on pull-out specimens with a longitudinal crack along the reinforcing bar caused by transverse tensile stresses. The experimental program included high cyclic tests with different stress ranges and varying longitudinal crack widths up to one million load cycles. By means of the slip development, a definite dependency of the bond strength on the transverse tension could be observed. Based on the slip development, normalised S-N curves for bond fatigue have been deduced. These S-N curves can be set in direct relation to the S-N curves for steel fatigue and simplify creating constant life diagrams for design purposes. It becomes clear that the bond fatigue strength, due to an existing longitudinal crack, gains in importance in comparison to the fatigue strength of the reinforcing steel. info:eu-repo/classification/ddc/690 ddc:690
3	Evaluation and Structural Behavior of Deteriorated Precast, Prestressed Concrete Box Beams Ryan T Whelchel (7874897) 22 November 2019 (has links) Adjacent precast, prestressed box beam bridges have a history of poor performance and have been observed to exhibit common types of deterioration including longitudinal cracking, concrete spalling, and deterioration of the concrete top flange. The nature of these types of deterioration leads to uncertainty of the extent and effect of deterioration on structural behavior. Due to limitations in previous research and understanding of the strength of deteriorated box beam bridges, conservative assumptions are being made for the assessment and load rating of these bridges. Furthermore, the design of new box beam bridges, which can offer an efficient and economical solution, is often discouraged due to poor past performance. Therefore, the objective of this research is to develop improved recommendations for the inspection, load rating, and design of adjacent box beam bridges. Through a series of bridge inspections, deteriorated box beams were identified and acquired for experimental testing. The extent of corrosion was determined through visual inspection, non-destructive evaluation, and destructive evaluation. Non-destructive tests (NDT) included the use of connectionless electrical pulse response analysis (CEPRA), ground penetrating radar (GPR), and half-cell potentials. The deteriorated capacity was determined through structural testing, and an analysis procedure was developed to estimate deteriorated behavior. A rehabilitation procedure was also developed to restore load transfer of adjacent beams in cases where shear key failures are suspected. Based on the understanding of deterioration developed through study of deteriorated adjacent box beam bridges, improved inspection and load rating procedure are provided along with design recommendations for the next generation of box beam bridges. Structural Engineering deteriorated prestressed concrete adjacent concrete box beams strand corrosion bridge inspection longitudinal cracking non-destructive testing ground penetrating radar half-cell potentials visual inspection concrete deterioration destructive evaluation structural testing live-load distribution adjacent box beam bridge rehabilitation concrete deck load rating structural capacity
4	Response of concrete pavements under moving vehicular loads and environmental effects Darestani, Mostafa Yousefi January 2007 (has links) The need for modern transportation systems together with the high demand for sustainable pavements under applied loads have led to a great deal of research on concrete pavements worldwide. Development of finite element techniques enabled researchers to analyse the concrete pavement under a combination of axle group loadings and environmental effects. Consequently, mechanistic approaches for designing of concrete pavements were developed based on results of finite element analyses. However, unpredictable failure modes of concrete pavements associated with expensive maintenance and rehabilitation costs have led to the use of empiricalmechanistic approach in concrete pavement design. Despite progressive knowledge of concrete pavement behaviour under applied loads, concrete pavements still suffer from deterioration due to crack initiation and propagation, indicating the need for further research. Cracks can be related to fatigue of the concrete and/or erosion of materials in sub-layers. Although longitudinal, midedge and corner cracks are the most common damage modes in concrete pavements, Austroads method for concrete pavement design was developed based on traditional mid-edge bottom-up transverse cracking introduced by Packard and Tayabji (1985). Research presented in this thesis aims to address the most common fatigue related distresses in concrete pavements. It uses comprehensive finite element models and analyses to determine the structural behaviour of concrete pavements under vehicular loads and environmental effects. Results of this research are supported by laboratory tests and an experimental field test. Results of this research indicate that the induced tensile stresses within the concrete pavement are significantly affected by vehicle speed, differential temperature gradient and loss of moisture content. Subsequently, the interaction between the above mentioned factors and concrete damage modes are discussed. Typical dynamic amplifications of different axle groups are presented. A new fatigue test setup is also developed to take into consideration effects of pavement curvature on fatigue life of the concrete. Ultimately, results of the research presented in this thesis are employed to develop a new guide for designing concrete pavements with zero maintenance of fatigue damage. dynamic analysis dynamic amplification finite element analysis finite element model static analysis axle group loads critical axle group configuration critical position of axle groups tyre pavement interaction stress distribution fatigue failure concrete pavement distresses corner cracking longitudinal cracking transverse cracking top-down cracking bottom-up cracking boundary conditions debonding layer temperature effects loss of moisture contents shrinkage effects curling induced stress warping stress pavement curvature field test laboratory text experimental study truck load JPCP JRCP CRCP SAST SADT TAST TADT TRDT QADT

1

Page generated in 0.0786 seconds