Spelling suggestions: "subject:"loosened"" "subject:"loosening""
1 |
College students’ memory of the imposed social norm of their Texas high school: a replication of Gelfand’s tightness-looseness studyMerriweather, Katherine Anne 18 September 2014 (has links)
Using Texas undergraduates’ memory of high school social norms (n = 88), I attempt to determine the replicability of Gelfand et al.’s (2011) research on the tightness-looseness scores of 33 nations. Tightness-looseness refers to a complex model in which cultural social norms are explicated. “Tight” cultures indicate strong social norms where members perceive larger pressures for conformity. These pressures result in higher levels of self-monitoring and regulation. Conversely, “loose” cultures signify weaker social norms and a higher tolerance for atypical conduct. My research confirms that the tightness-looseness model can be applied to school environments because my research revealed a tightness-looseness mean score of 4.3, which is near the midpoint of the six-point scale. Gelfand et al.’s (2011) research (n = 6,823) revealed that the United State had a tightness-looseness score, 5.4, which was near the middle of the range of scores for the 33 nation samples, which ranged from 1 to 12.3. However, my research discovered no significant effects of tightness-looseness on demographic variables, or on the Behavior or Situation Measures. These non-significant findings do not necessarily preclude the concepts discussed here from future research. Rather, future research should include comparison groups from different educational environments and a larger sample size reflective of Gelfand et al. (2011). / text
|
2 |
Evaluation of the performance of GFRP dowels in Jointed Plain Concrete Pavement (JPCP) for road/airport under the combined effect of dowel misalignment and cyclic wheel loadAl-Humeidawi, Basim Hassan Shnawa January 2013 (has links)
Dowel bars are provided at the transverse joints of the Jointed Plain Concrete Pavement (JPCP) to transfer the load between adjoining slabs and to allow for expansion and contraction of the pavement due to temperature and moisture changes. The current study involved evaluation of the performance of Glass Fibre Reinforced Polymer (GFRP) dowels in JPCP as an alternative to the conventional epoxy-coated steel dowel bars, especially in the presence of dowel misalignment. This research involved two main sets of experimental tests. The first set focused on the evaluation of load-deflection response of GFRP dowels using a scaled model of pavement slabs. The second set investigated the combined effect of dowel misalignment and cyclic wheel load on the performance of steel and GFRP dowels. The tested slabs (in the second set) were supported on a steel-beam base with stiffness such that the effects of the underlying layers of real pavements are incorporated. In both of these sets of experiment the GFRP dowels were compared with the steel dowels of similar flexural rigidity. The research also involved detailed numerical investigations using ABAQUS for all experimental tests in the current study. The validated numerical model was used to conduct three sets of parametric studies: to propose design considerations for the GFRP dowels; to simulate all important cases of dowel misalignment (111 cases) for steel and GFRP dowels and to give an insight into the damaged volume in the surrounding concrete pavement; and to investigate the effects of diameter, length and type of dowel bar, concrete grade, pavement thickness, and slab-base friction on the joint-opening behaviour. The results from the first set of experiments showed that the 38 mm GFRP dowels perform better in terms of deflection response compared to the 25 mm steel dowels. Also, it was observed that the relative deflection (RD) is more sensitive to the changes in the joint width rather than the concrete strength. The numerical results from the first set showed a good agreement with the experimental results and showed lower magnitude and better distribution of stress in the concrete underneath the GFRP dowels as compared with the steel dowels. Finally, on the basis of a detailed parametric study (70 different cases), design considerations for GFRP dowels in JPCP were suggested. The second set of experimental results showed that the GFRP dowels can withstand a cyclic traffic load and significantly reduce joint lockup and dowel looseness (DL) and can provide sufficient load transfer efficiency (LTE). It was also observed that the dowel misalignment affects DL significantly more than the repeated traffic load. Slab-base separation and the orientation of misaligned dowels have significant effects on the pull-out load required to open the joint. The numerical results from the second set indicated that the pull-out load was small for the vertical misalignment cases compared to the horizontal and combined misalignment cases. The results also indicated the occurrence of concrete spalling and deterioration at smaller joint openings for combined misalignment when compared to other misalignment types. The use of GFRP dowels significantly reduced the pull-out load and joint lockup when dowel misalignment exists. Consequently, the deterioration of the surrounding pavement substantially decreased. The long term performance of the JPCP fitted with GFRP dowels improves because of a reduction in the DL and the RD, and by maintaining a good LTE even for misaligned dowels. The numerical results also showed that the pull-out load increases significantly for an increase in the concrete compressive strength and the dowel bar diameter. Small increase in pull-out load was observed for higher embedded length of the dowel bar, whereas the increase was insignificant for an increase in the pavement thickness and slab-base friction. In general, the study showed the GFRP dowel can be a potential alternative for the conventional steel dowel bars in JPCP.
|
3 |
Quality inspection of leather using novel planar sensor : a thesis submitted in fulfilment of the requirements for the degree of Master of Engineering (Research), School of Engineering and Advanced Technology, Massey University, Turitea campus, Palmerston NorthKasturi, Vishnu Mohan January 2008 (has links)
Value of leather produced from sheep is determined by its quality and looseness is one of the quality attributes that determines the value of the leather. As of now, looseness in sheep skin can be determined only after the tanning process is done and it is a long and expensive process to treat the looseness in skins after the tanning process. An interdigital sensor based sensing system has been developed which works on the principle of sensing technique based on interaction of electric field with the materials under test. Finite element software has been used for analysis and design of sensors. It has been reported that a good correlation was found between the actual looseness values and calculated looseness values.
|
Page generated in 0.0563 seconds