This master thesis deals with development and construction of ultrasound diagnostical system with USB interface. The main task is to study current usage of A mode ultrasound systems and methods of their construction. Following with own design of A mode ultrasound system with usage of assigned Olympus ultrasound transducer.

This master´s thesis deals about a measuring structures of elements working at a current mode. There were outlined structures for measuring input and output impedance. These structures were simulated for DACA element. It deals with a voltage to current and current to voltage converters. All structures and converters were simulated at computer program PSpice. Selected variant were practically verified and control measuring was realized.

The aim of the diploma thesis Philosophy of Erich Fromm and Its Impact on the Present was to place the legacy of Erich Fromm into a philosophical context. The diploma thesis contains 4 main sections. The keywords needed to draw the philosophical background are defined in the first section, namely Privation; Hedonism; Eudemonia; and Virtues. The life and work of Erich Fromm are presented in the second section. Biography is followed by the third and most important section: the distinction of two life orientations. Fromm's existential modes of having and being are presented at the subchapters Speech; Authority and its application; Self-knowledge and personal development; Conversation; and Fear of Death. I focus on the vision of a new society according to Fromm's concept in the fourth section. In the last chapter, I offer a critical evaluation of the presented theses.

The main topic of this thesis is the implementation and subsequent optimization of high performance applications on a cluster of Intel Xeon Phi coprocessors. Using two approaches to solve the N-Body problem, the possibilities of the program execution on a cluster of processors, coprocessors or both device types have been demonstrated. Two particular versions of the N-Body problem have been chosen - the naive and Barnes-hut. Both problems have been implemented and optimized. For better comparison of the achieved results, we only considered achieved acceleration against single node runs using processors only. In the case of the naive version a 15-fold increase has been achieved when using combination of processors and coprocessors on 8 computational nodes. The performance in this case was 9 TFLOP/s. Based on the obtained results we concluded the advantages and disadvantages of the program execution in the distributed environments using processors, coprocessors or both.

Master´s thesis deals about design of symmetrical converters voltage on current and current on voltage. These converters will be used for measuring frequency characteristics of differential frequency filters. Current feedback amplifier was used as active element. Some circuits useful for this function were chosen. Various integrated circuits were put into these circuits. All variations were simulated in computer program Orcad. In terms of computer simulations the best variation was chosen. Selected variants were practically verified and control measuring were realized.

The master thesis focuses on design of fully-differential frequency filters with modern active components in current mode. First part informs about problems concerning analogue frequency filters and creating differential structures. Second part deals with methods of create filters and used active components - DACA (Digital Adjustable Current Amplifier) and MO-CF (Multiple Output Current Follower). Own design of differential filters is divided on two parts. In the first part of design results there are filters created with synthetic higher-order elements. There are presented circuit structures implementing the third order low pass filter and high pass filter. In the second part are designed filters with signal flow graphs. The first circuit implementing low pass, high pass, band pass, band rejection and all-pass filter. The second circuit is with help of the same set of current amplification by DACA components tuning of the natural frequency. For this circuit was make sensitivity analysis. In the final part is practical implementation of the differential frequency filter for tuning of the natural frequency and summarises the thesis.

This master´s thesis deals with the differential filters working in the current mode. It is dealt with the design methodologies of these filters and conversion circuits from voltage to current mode. Own work deals with 4 types of differential participation of structures. In this work there has been used programs SNAP and OrCAD. These programs were used for simulations of filters to proposed proper design. Results from this thesis is showed by graphs.

The main topic of my diploma thesis is dedicated to the issue of wireless networks mostly aimed at IEEE 802.11 standard. Theoretical part of the thesis is divided into three main chapters. It deals with basic overview of standards, architecture, utilization of radio spectrum and modulating techniques in signal processing. Further, it describes basic security measures and quality of service requirements in WLAN networks. The thesis is complemented by two separate laboratory assignments focused on procedure related to the chosen problematic. The first assignment handles common steps to break ciphered protocols WEP and WPA in WLAN’s. Linux software called Back Track 5 was used to provide complete package of tools for WLAN security tests. The second one is aimed at practical options on video streaming in converged wireless networks and also at remote access of mobile users to wireless IP camera video stream.

This project is focused on construction of source of modulation signal for microwave beacon. The output signal is the same as signal, which is generated by PC software WSJT (Weak Signal by Joe Taylor) on PC sound card output. Signal on device output is modulated using by WSJT modulation and its specific JT4 mode. The device output has I and Q components of signal.

The thesis deals with definitions of new current- or mixed-mode circuit elements and their implementations and applications. Based on the analysis of the state-of-the-art, novel application circuits employing the above circuit elements are designed. For the purpose of the experimental verification, the active elements are implemented via commercial integrated circuits, and their applications are simulated via PSpice. The application circuits are focused on frequency filters, rectifiers, oscillators, and current-copy circuits. Selected applications are analyzed with respect on real influences, and measurements on circuit prototypes are also performed.