Submitted work engages in suggestion of frequency-selection filters with usage of more active elements of the MCMI (Multi-Output Current Mirror and inverter). The preamble of thesis is applied to theory of frequency-selection filters and possible usage of them. The projected circuit layouts with the active elements are discussed in terms of the impact of parasitic properties of the real models. The part of thesis is numerical suggestion of found solutions, their simulation in suitable program.

The master thesis deals with design of the fully differential frequency filters working in the current mode and is focused on possibilities of the natural frequency and the quality factor adjustment. At the beginning, there is a brief description of frequency filters and active elements (MO-CF, FD-CF and DACA), which are used in the thesis. Furthermore, simplified signal flow graphs design method and transformation of passive and active elements to the differential structures are described. The designs of four differential circuitries which provide possibility of tuning the natural frequency or quality factor by the gain of the DACA element are shown in the thesis. Simulation results made in OrCAD program with help of third-order models are included. The practical implementation of the differential frequency filter for tuning of the natural frequency by the DACA elements is shown in the last chapter.

The aim of the master’s thesis, is to get acquainted with the dynamic focusing in conventional ultrasound systems, to modify this method for ultrasound computer tomography and to realize and interpret this modification on simulated and real data in a transparent graphic interface. The modification of the dynamic focusing was executed for the 3D ultrasound computer tomograph developed in Karlsruhe. Simulated data, that are necessary for focusing, were generated by existing program, which was adjusted. The new created program of the dynamic focusing was tested and evaluated with those simulated and real data.

This master’s thesis deals with problems of analog differential converters, which are used in measuring circuits working in the current mode. The aim of this thesis is to propose a new voltage to current and current to voltage converter, that should influence measured frequency properties as little as possible. Commercial active elements are use to design converters. Active components are compared on the basis of properties as bandwidth and slew rate. Designed converters are simulated in Orcad PSpice program. Converters, of the best behavior are practically implemented and measured. Measured and simulated values are compared.

In the range of linear elastic fracture mechanics, the conditions for critical loading assessment of structures made of two dissimilar materials are usually based on the assumptions of prevailing normal mode of loading. The same assumption is usually applied to the stability criterion of bi-material notches. However, in engineering practice there are cases of loading and failure closed to the shear mode. The aim of the work is the assumption of the stability criterion of bi-material notches subjected to combination of normal and shear loading. The FEM model of the bi-material notch under combination of normal and shear loading mode is created and solved and evaluated as well.

The presented dissertation thesis deals with modular design of analog circuits in CMOS technology. The goal of the work is to design a set of modular microelectronic building blocks and realize the selected modern active circuits, working primarily in current mode. Nevertheless, the modular approach can be used for design of generally known classical elements, e.g. opamps, as well. As a part of the work, the development of the totally new highly versatile active circuit CCTA has been done, including detailed analysis of utilization and introduction of the most interesting applications. This circuit CCTA, together with relative, already theoretically treated circuit CDTA, has been realized here for the first time, in two different topologies. Final circuits were tested. On the basis of measurement results the library of behavioral models for PSpice was created, including exemplary simulations of the selected applications. Based on the obtained knowledge the brief comparison of voltage mode circuits and current mode circuits was done.

Semestral thesis deals with fractional-order frequency filters. There is descripe proposal of the filter, their simulations and practical realizations. The first part is focused at the introduction to a frequency filters. The following is chapter which explore various proposals fractional-order frequency filters. The next chapter describes used activ elements in this thesis. Then there is briefly described a method of the signal flow graphs. The following is a description of the theoretical design of lowpass and highpass frequency filter, where order of the filter is between the first and second. Another part deal with the design and simulation of the four circuits. There are two curcuits consists of transconductance amplifiers (BOTA) and two curcuist consists of current followers. The last part of the thesis deals with practical realization of the two fractional-order filters.

This thesis deals with the fractional (1+)-order filters. The proposed filters operate in the current-mode. The derivation of the filters has been achieved using a third-order aproximation of the coresponding fractional-order transfer functions. It also describes active elements such as universal current conveyor, current follower and operational transconductance amplifier. In the end of this thesis some new circuit solutions of the fractional-order filter are proposed. Then the proposed filters are realized and experimentally measured.

Title: Photon strength functions in Gd isotopes studied from resonance neutron capture Author: RNDr. Jiří Kroll Department: Intitute of particle and nuclear physics Supervisor: doc. Mgr. Milan Krtička, Ph.D., Intitute of particle and nuclear physics Abstract: Photon strength functions have been studied for more than sixty years. A number of theoretical models was proposed to describe experimental data during that time. However, the correctness of these models is still very questionable and its verification is the subject of very intensive experimental and theoretical activity at present time. In this thesis the analysis of spectra of γ rays following the radiative capture of neutrons on isolated neutron resonances of 152,154−158 Gd nuclei is used to study photon strength functions. Experimental data were measured using segmented DANCE calorimeter that is installed at Los Alamos Neutron Scattering Center in New Mexico, USA. Experimental spectra are then compared with the outputs of Monte Carlo simulation of nuclear elec- tromagnetic decay, performed by DICEBOX code, that is based on the validity of the so-called Extreme Statistical Model. The response of the detector system to generated γ cascades was subsequently calculated using the Geant4 code. An analysis of the data clearly indicates that magnetic...

The γ decay of highly excited nuclear levels can be described within the statistical model of nucleus in terms of the level density and a set of photon strength functions. The knowledge of these quantities enables more accurate calculations of reaction rates in many different reactions which are important especially in nuclear astrophysics and in the development of advanced nuclear reactors. Despite the fact that the photon strength functi- ons have been studied for decades, there are still contradicting experimental results regarding the low energy behavior of dipole strength. One of these ca- ses is the shape of electric dipole photon strength function and the strength of the scissors mode in well-deformed rare-earth nuclei. In this thesis the ana- lyses of γ-ray spectra measured by two different experimental setups are pre- sented. The two-step γ cascades measurements with odd gadolinium targets were performed at the research reactor LVR-15 at the Research Centre Řež. In the multi-step γ cascades experiments the γ rays following resonance ne- utron capture on 161−163 Dy targets were measured with the highly-segmented γ-ray calorimeter Detector for Advanced Neutron Capture Experiments in the Los Alamos Neutron Science Center at Los Alamos National Labora- tory. Experimental spectra were compared...