Polystyrene block polyethyleneimine (PS-b-PEI) copolymer prepared by combining PS and poly(2-methyl-2-oxazoline) (PMeOx) segments together through two strategies. Furthermore, PMeOx block was hydrolysis to produce PEI block which linked with PS block. Macroinitiator route is one of these two ways to prepare PS-b-PEI copolymer. Polystyrene macroinitiator or poly(2-methyl-2-oxazoline) macroinitiator prepared through Nitroxide Mediate Radical Polymerization (NMRP) or Cationic Ring Opening Polymerization (CROP) respectively. Each macroinitiator has active initiated terminal group toward another block monomer. Second strategy based on coupling of PS segment with PMeOx block through “click” coupling chemistry. Polystyrene modified with terminal azide moiety are combined with PMeOx functionalized with alkyne group via 1,3 dipolar cycloaddition reaction “click reaction”. PS-b-PMeOx was hydrolysis in alkaline medium to produce amphiphilic PS-b-PEI copolymer. A set of block copolymer with different block ratios was prepared and investigated to select suitable block copolymer for further applications. Stichiometric PS-b-PEI copolymer selected to stabilize gold nanoparticle (Au NPs) in polymer matrix. PEI segment work as reducing and stabilizing agent of gold precursor in aqueous solution. Various concentrations of gold precursor were loaded and its effect on UVVIS absorbance, particle size and particle distribution studied. In addition, reduction efficiency of PEI block was determined from XPS measurements. The thickness of Au NPs/PS-b-PEI thin film was determined with a novel model for composite system. On the other hand, Gallium nitride quantum dots (GaN QDs) stabilized in PS-b-PEI copolymer after annealing. Our amphiphilic block copolymer exhibit nice thermal stability under annealing conditions. GaN QDs prepared in narrow nano-size with fine particle distribution. Blue ray was observed as an indication to emission activity of GaN crystal. Over all, PS-b-PEI copolymer synthesized through macroinitiator and click coupling methods. It was successfully stabilized Au NPs and GaN QDs in polymer matrix with controlled particle size which can be post applied in tremendous industrial and researcher fields.

Polystyrene block polyethyleneimine (PS-b-PEI) copolymer prepared by combining PS and poly(2-methyl-2-oxazoline) (PMeOx) segments together through two strategies. Furthermore, PMeOx block was hydrolysis to produce PEI block which linked with PS block. Macroinitiator route is one of these two ways to prepare PS-b-PEI copolymer. Polystyrene macroinitiator or poly(2-methyl-2-oxazoline) macroinitiator prepared through Nitroxide Mediate Radical Polymerization (NMRP) or Cationic Ring Opening Polymerization (CROP) respectively. Each macroinitiator has active initiated terminal group toward another block monomer. Second strategy based on coupling of PS segment with PMeOx block through “click” coupling chemistry. Polystyrene modified with terminal azide moiety are combined with PMeOx functionalized with alkyne group via 1,3 dipolar cycloaddition reaction “click reaction”. PS-b-PMeOx was hydrolysis in alkaline medium to produce amphiphilic PS-b-PEI copolymer. A set of block copolymer with different block ratios was prepared and investigated to select suitable block copolymer for further applications. Stichiometric PS-b-PEI copolymer selected to stabilize gold nanoparticle (Au NPs) in polymer matrix. PEI segment work as reducing and stabilizing agent of gold precursor in aqueous solution. Various concentrations of gold precursor were loaded and its effect on UVVIS absorbance, particle size and particle distribution studied. In addition, reduction efficiency of PEI block was determined from XPS measurements. The thickness of Au NPs/PS-b-PEI thin film was determined with a novel model for composite system. On the other hand, Gallium nitride quantum dots (GaN QDs) stabilized in PS-b-PEI copolymer after annealing. Our amphiphilic block copolymer exhibit nice thermal stability under annealing conditions. GaN QDs prepared in narrow nano-size with fine particle distribution. Blue ray was observed as an indication to emission activity of GaN crystal. Over all, PS-b-PEI copolymer synthesized through macroinitiator and click coupling methods. It was successfully stabilized Au NPs and GaN QDs in polymer matrix with controlled particle size which can be post applied in tremendous industrial and researcher fields.

New water soluble, attainable to ATRP polymerization Cl-terminated poly(glycidol) macroinitiators were prepared by modification of (Omega)-hydroxyl group of poly(glycidol acetal) using 2-chloropropionyl chloride fallowed by selective acidic deprotection of acetal groups. The obtained macroinitiators of different molar masses were successfully employed in ATRP of NIPAM and 4VP to give well-defined stimuli sensitive block copolymers of targeted molar ratio of blocks. The results obtained from light scattering methods showed formation of stable aggregates upon stimuli (pH or temperature) by all the obtained polymers. Additionally, photocrosslinkable block copolymers of glycidol and NIPAM having incorporated moieties of chromophore (2-(dimethyl maleinimido)-N-ethyl-acryl amide) were prepared using macroinitiator technique and used to synthesis of temperature sensitive microgels. Conjunction points have been successfully formed by UV irradiation of polymer water solution above cloud point. The influence of such parameters like block ratio, block length, amount of chromophore, concentration, irradiation time, temperature and heating rate on the properties of obtained microgels was investigated. The obtained core-shell structures were stable under critical conditions and showed continuous volume phase separation process upon increase of temperature, fully reversible and reproducible (no hysteresis effect). Thus, the proposed method not only gave the opportunity to control size or swelling degree of microgels, but also diminished gradient in crosslinking density (random chromophore distribution in polymer backbone), improved colloid stability (poly(glycidol) shell) and completely eliminated additives (surfactants, initiators, stabilizers).

New water soluble, attainable to ATRP polymerization Cl-terminated poly(glycidol) macroinitiators were prepared by modification of (Omega)-hydroxyl group of poly(glycidol acetal) using 2-chloropropionyl chloride fallowed by selective acidic deprotection of acetal groups. The obtained macroinitiators of different molar masses were successfully employed in ATRP of NIPAM and 4VP to give well-defined stimuli sensitive block copolymers of targeted molar ratio of blocks. The results obtained from light scattering methods showed formation of stable aggregates upon stimuli (pH or temperature) by all the obtained polymers. Additionally, photocrosslinkable block copolymers of glycidol and NIPAM having incorporated moieties of chromophore (2-(dimethyl maleinimido)-N-ethyl-acryl amide) were prepared using macroinitiator technique and used to synthesis of temperature sensitive microgels. Conjunction points have been successfully formed by UV irradiation of polymer water solution above cloud point. The influence of such parameters like block ratio, block length, amount of chromophore, concentration, irradiation time, temperature and heating rate on the properties of obtained microgels was investigated. The obtained core-shell structures were stable under critical conditions and showed continuous volume phase separation process upon increase of temperature, fully reversible and reproducible (no hysteresis effect). Thus, the proposed method not only gave the opportunity to control size or swelling degree of microgels, but also diminished gradient in crosslinking density (random chromophore distribution in polymer backbone), improved colloid stability (poly(glycidol) shell) and completely eliminated additives (surfactants, initiators, stabilizers).