The interest towards organic semi-conductors increased due to their tunable band gaps, redox properties, processability and low cost in the field of conducting polymers. Electrochromic materials have the ability to change color by altering their redox state. In the context of low cost flexible display device technology, requirements can be fulfilled with accessible multi-colored electrochromic polymers. In this study, we report the chemical synthesis and electrochromic properties of two spray processable, ambipolar, fluorescent and multi-color to transmissive electrochromic polymers. The electrochromic properties of these polymers were examined by cyclic voltammetry, spectroelectrochemistry, kinetic studies. Polymers, PTBTPh and PTBTTh, have multi-colored oxidation states and easily accessible ndoped states, which allowed us to achieve transmissive films in a low working potential. Electrochemical and spectral results showed that both polymers are potential materials for electrochromic display devices.

In this study, a novel series of conjugated monomers containing furan and fluorene units / 2,7-di(furan-2-yl)-9H-fluoren-9-one (FOF), 2-(2-(furan-2-yl)-9H-fluoren-7-yl)furan (FFF), and 2-(2-(furan-2-yl)-9,9-dihexyl-9H-fluoren-7-yl)furan (FHF) were synthesized and their electrochemical polymerization were achieved via potential cycling. Optical and electrochemical properties of the polymers, poly(2,7-di(furan-2-yl)-9H-fluoren-9-one) (PFOF), poly(2-(2-(furan-2-yl)-9H-fluoren-7-yl)furan (PFFF) and poly(2-(2-(furan-2-yl)-9,9-dihexyl-9H-fluoren-7-yl)furan) (PFHF) were investigated and it was found that polymer films exhibit reversible redox behavior (Epox = 1.083 V for PFOF, Epox= 0.915 V for PFFF and Epox= 0.985 V for PFHF) accompanied with a reversible electrochromic behavior, orange to green for PFOF, yellow to dark blue for PFFF and orange to green for PFHF during oxidation. Their band gap values (Eg) were found to be 2.32, 2.49 and 2.61 eV for PFOF, PFFF and PFHF, respectively.

During last decade, polyurethanes (PUs) which are able to degrade into harmless molecules upon implantation have received a significant level of attention as a biomaterial in tissue engineering applications. Many studies are focused especially on development of PUs based on amino acid derivatives / however, there are only few applications of amino acid based PUs in tissue engineering. In this study, a biocompatible and biodegradable thermoplastic poly(ester-urethane) (PEU) based on L-lysine diisocyanate (LDI) and polycaprolactone diol (PCL) was synthesized and used for the preparation of two dimensional (2D) films and three dimensional (3D) scaffolds. The resulting polymer was casted as 2D films for full characterization purpose and it was found that it is highly elastic with modulus of elasticity ~12 MPa. Surfaces of 2Ds were modified via micropatterning and fibrinogen coating to check the material-cell interaction. The 3D scaffolds were obtained by salt leaching and rapid prototyping (bioplotting) techniques. The 3D scaffolds had various pore size and porosity with different mechanical strength. The bioplotted scaffolds had uniform pore size of ~450 &micro / m and exhibited higher compressive modulus (~4.7 MPa) compared to those obtained by salt leaching (~147 kPa). Salt leached 3D scaffolds had inhomogenous pore size distribution in the range of 5 &micro / m - 350 &micro / m and demonstrated greatest degradation profile compared to 2D films and 3D bioplotted samples under enzymatic condition. Rat bone marrow stem cells (BMSCs) were used to investigate the biocompatibility of the polymer and suitability of fabricated scaffolds for osteogenesis. Presence of micropatterns on 2D matrices did not show any influence on osteoblastic function, but presence of fibrinogen enhanced cell attachment and proliferation. All of the fabricated 3D PEU matrices supported proliferation, osteoblastic differentiation and extracellular matrix (ECM) deposition with highest osteoblastic activity on bioplotted scaffolds which confirmed by von Kossa staining and EDX analysis. The results indicated that the synthesized PEU based scaffolds were able to induce osteoblastic differentiation and mineralization of BMSC and therefore these scaffolds can be good candidates to be used in bone tissue engineering

Controlled drug delivery systems are becoming increasingly interesting with the contribution of nanotechnology. In the case of transdermal applications the greatest limitation is the highly impermeable outermost layer of the skin, the stratum corneum. One promising method of controlled transdermal drug delivery of the skin therapeutics is the use of nanoparticles as carriers. Encapsulation of the drug, as opposed to classical topical application of creams or emulsions, allows the drug to diffuse into hair follicles where drug release can occur in the deeper layers of the skin. The aim of this study was to develop micro and nano sized carriers as drug delivery systems to achieve treatment for skin conditions like psoriasis, aging or UV damage, caused by radiation or health problems. Two different types of bioactive agents, retinyl palmitate (RP) and Dead Sea Water (DSW), were used by encapsulating in poly(3-hydroxybutyrate-co-3-hydroxyvalerate) carriers. In some tests MgCl2 was used as a substitute for DSW when quantification was needed. Bioactive agent loaded nanospheres and nanocapsules were prepared with o/w and w/o/w methods in low micron (1.9 &micro / m), mid nano (426 nm) and nano (166 nm) sizes. Loading, encapsulation efficiency and release kinetics were studied. The encapsulation efficiency and loading values are low especially for the water soluble agents, DSW and MgCl2. It was observed that the capsules loaded with hydrophilic agents released their content in the first 24 h in aqueous media. The encapsulation efficiency and loading values for RP were higher because of the insolubility of the agent in water. In the in vitro studies carried out with L929 mouse fibroblast cells, the nano sized PHBV capsules were detected in the cytoplasm of the cells. Cell viability assay (MTT) for L929 cells showed a growth trend indicating that the particles were not cytotoxic and the values were close to the controls. Hemolytic activity was examined using human erythrocytes and micro/nanoparticles of PHBV were found to be non hemolytic. In vivo testing with BALB/c mice, nanocapsule penetration revealed that a small amount of nano sized particles penetrated the mice skin, despite the highly impermeable outer skin layer. As a result, PHBV micro/nanoparticles have a significant potential for use as topical drug delivery systems in the treatment of skin diseases.

Donor-acceptor-donor approach is one of the effective ways to synthesize low band gap polymers. The monomers that will be designed with respect to donor-acceptor-donor approach have low band gap achieved by the coupling of a strong donor with high HOMO level to a strong acceptor with low LUMO level. Thus, the new donor-acceptor material will have a reduced bandgap (Eg) relative to either of its parent components. Due to this point of view, in this study, new electroactive benzothiadiazole and 2,3-bis(4-(tert-butyl)phenyl)quinoxaline monomers substituted with different donor groups (3,4-ethylenedioxythiophene and thiophene) were synthesized to explain the effect of different donor groups on the electronic and optical properties of DAD type polymers. The characterizations of the monomers were performed by 1H and 13C NMR techniques. Electrochemical behavior of both monomers and polymers were studied by cyclic voltammetry. The electrochromic properties of the synthesized conducting polymers were investigated by several methods like spectroelectrochemistry, kinetic and colorimetry studies. The polymers have two different donor units may behave as a copolymer of the symmetric monomer having the same donor groups. Hence, the properties of copolymers were investigated with the co-monomers having either thiophene or 3,4-ethylenedioxythiophene as the donor group.

In the present study the effects of addition of organically functionalized boehmite nano-particles on the mechanical properties of epoxy polymers were analyzed. Nanosize platelets of boehmite powders were produced via a hydrothermal process from the raw material aluminum trihydroxide Al(OH)3 provided by a a chemical supplier, but which in future studies can be replaced by local resources of aluminum trihydroxide available in Seydisehir, Turkey. The ground aluminum trihydroxide particles were submitted to a two-step preliminary ageing procedure in different pH media. Particles were then converted to boehmite nanoparticles via hydrothermal ageing at high pressure and temperature. The product&lsquo / s chemical identity, size, structure and morphology were characterized with XRD, FT-IR, SEM and PSA analyses. By controlling the pH and the ageing time as parameters, hexagonal shaped nanoplatelets were obtained with dimensions ranging from 100 to 500 nm. Aiming at using these nanoparticles into surface coating polymers, the most favorable shape is the plate-like morphology, leading to adopting the last hydrothermal condition in the rest of the study. v The boehmite crystal surfaces are furnished with hydroxyls which can potentially be reacted with epoxy monomers of bisphenol A diglycidyl ether with the help of tin (II) chloride as catalyst through ring-opening reactions. The FT-IR and quantitative analyses indicated that this surface functionalization is possible under a temperature 80 oC and a weight ratio of 5:1 epoxy monomer to boehmite powder These novel inorganic/organic hybrid materials were then mixed with epoxy/hardener resin mixture to obtain nanocomposites. The properties of the composites were characterized accordingly with tensile, impact, micro hardness, micro-scratch tests, DMA analysis and observed with SEM analysis. A deterioration of the tensile strength from the neat polymer was observed, with a distinct trend between the functionalized and non-functionalized boehmite-epoxy polymers. The functionalized polymers showed a less deteriorative character. The tensile modulus instead showed a little improvement of (4%) in 5wt% loaded polymers. DMA analysis results revealed an improved glass transition temperature in the nanocomposites as well as in storage and loss modulus. As aimed in this work, the functionalized boehmite-epoxy polymers displayed a clear improvement in comparison to both non-functionalized and neat polymers in surface coating properties in hardness and scratch resistance.

The desirable properties of polyurethanes (PUs) such as mechanical flexibility associated with chemical versatility make these polymers attractive in the development of biomedical devices. In this study, various segmented polyurethanes were synthesized through polymerization reactions between polycaprolactone (PCL) diol or triol and excess hexamethylene diisocyanate (HDI) with varying NCO/OH ratios and the effect of composition on the properties of the resultant polyurethane films were examined. Initially, isocyanate terminated prepolymers were synthesized through one-shot polymerization, and then these prepolymers were cured by introducing crosslinkages into the structure and thus PUs were obtained. In order to enhance biocompatibility and hydrophilicity of the resulting polymers, heparin was added into the prepolymer before the curing process. The influence of excess HDI as a crosslinker on the degree of H-bond formation between hard-hard segments or hard-soft segments was examined by using Fourier transform infrared-Attenuated total reflectance spectroscopy (FTIR-ATR). Also the effects of HDI content on the chemical, physical and mechanical properties of the polyurethanes were examined with differential scanning calorimetry (DSC), X-Ray diffraction spectroscopy (XRD), dynamic mechanical analyzer (DMA), mechanical tester and goniometer. FTIR- ATR, DSC and DMA analyses showed that use of triol resulted in better network formation and homogenous distribution of hard segments within soft segment matrix. Incorporation of heparin into the polymer matrix produced more hydrophilic films (water contact angle reduced from 80 to 60). Polyurethanes from PCL and HDI in the absence of any solvent, initiator, catalyst or chain extender were successfully synthesized and this kind of synthesis enhanced biocompatibility and increased the potential of polymers for use in biomedical applications.

The synthesis of ion-exchange resin which can be used in various separation and chemical purposes, such as diffusion dialysis, electro dialysis, electrolysis and fuel cells has of considerable interest. For all these applications, the interactions of the ionic groups and the resulted morphologies are critical for establishing the unique properties. Considerable researches have been continued to understand the microstructure of these materials. The aim of this study is to synthesize polypropylene (PP) based ion exchange resins and to investigate their ion-exchange properties. In the first part of this study polypropylene was functionalized by grafting maleic anhydride onto the polypropylene and the product was characterized by ATR. The effect of maleic anhydride introduced to the grafting medium and the effect of the radical initiator on the maleic anhydride content of the MA-g-PP samples were investigated. In the second part, neutralization of the MA-g-PP samples with Na+, K+, Mg2+ and Ca2+ ions and peroxide cross-linking of neutralized MA-g-PP samples were performed. Characterization of the neutralized MA-g-PP samples were performed by ATR and SEM-EDX. In the last part of the study, ion exchange properties of MA-g-PP resins towards Cu2+, Co2+, Cd2+, Pb2+ and Fe3+ ions at different pHs were investigated by batch equilibrium method. Rate of metal uptake, concentration effect on the metal uptake and regeneration of the MA-g-PP samples were also examined.

This thesis is aimed to understand the role of nanofiller type, nanofiller dispersion, nanofiller geometry, and, presence of reinforcing fibers in flame retardancy of polymer nanocomposites. For this purpose, montmorillonite nanoclays, multi-walled carbon nanotubes, halloysite clay nanotubes and silica nanoparticles were used as nanofillers in polymeric matrices of poly (methyl methacrylate) (PMMA), high-impact polystyrene (HIPS), polylactide (PLA) and polyamide-6 (PA6) containing certain conventional flame retardant additives. Furthermore, the influence of nanofiller and flame retardant additives on fiber/matrix interfacial interactions was studied. Materials were prepared by twin-screw extrusion melt-mixing and ultrasound-assisted solution-mixing techniques. Characterization of nanocomposite morphology was done by X-ray diffraction and transmission electron microscopy. Flame retardancy was investigated by mass loss cone calorimetry, limiting oxygen index measurements and UL94 standard tests. Flame retardancy mechanisms were revealed by characterization of solid fire residues by scanning electron microscopy, transmission electron microscopy, infrared spectroscopy and X-ray diffraction. Thermal degradation and stability was studied using thermogravimetric analysis. Mechanical properties were determined by tension tests and fracture surfaces were observed under scanning electron microscope. Influence of nanofiller type was investigated comparing the behavior of montmorillonite nanoclay and multi-walled carbon nanotube reinforced PMMA nanocomposites containing phosphorous/nitrogenous intumescent flame retardant. Carbon nanotubes hindered the formation of intumescent inorganic phosphate barrier which caused the samples to be exposed to larger effective heat fluxes during combustion. Contrarily, nanoclays physically reinforced the protective barrier without disrupting the intumescent character, thereby allowing for lower heat release and mass loss rates, and increased amounts of residue upon combustion. Influence of nanofiller dispersion was studied comparing nanocomposite and microcomposite morphologies in montmorillonite nanoclay reinforced HIPS containing aluminum hydroxide flame retardant. Relative to microcomposite morphology, reductions in peak heat release rates were doubled along with higher limiting oxygen index and lower burning rates with nanocomposite formation. Improved flame retardancy was attributed to increased amounts of char residue and lower mass loss rates. Nanocomposite formation allowed for the recovery of tensile strength reductions caused by high loading level of the conventional flame retardant additive in polymer matrix. Influence of nanofiller geometry was investigated for phosphorus based intumescent flame-retarded PLA nanocomposites. Fire performance was increased in the order of rod-like (1-D) &lt / spherical (0-D) &lt / &lt / plate-like (2-D) geometries which matched qualitatively with the effective surface area of nanoparticles in the nanocomposite. Well-dispersed plate-like nanoparticles rapidly migrated and accumulated on exposed sample surface resulting in the formation of strong aluminum phosphate/montmorillonite nanocomposite residue. Mechanical properties were increased in the order of 0-D &lt / 1-D &lt / 2-D nanofillers corresponding to the order of their effective aspect ratios in the nanocomposite. Influence of fiber reinforcement was studied for montmorillonite nanoclay containing short-glass fiber-reinforced, phosphorus/nitrogen based flame-retarded PA6 composites. Substitution of a certain fraction of conventional additive with nanofiller significantly reduced peak heat release rate, delayed ignition and improved limiting oxygen index along with maintained UL94 ratings. Improved flame retardancy was ascribed to the formation of a nanostructured carbonaceous boron/aluminum phosphate barrier reinforced by well-dispersed montmorillonite nanolayers. Fiber/matrix interfacial interactions in flame-retarded PA6 and HIPS containing nanoclays were investigated using a micromechanical approach, and it was found that the influence of nanoclay on the interface depends on crystallinity of polymer matrix. While the fiber/matrix interfacial strength is reduced with nanoclay incorporation into amorphous matrix composites, significant interfacial strengthening was imparted by large surface area, well-dispersed clay nanolayers acting as heterogeneous nucleation sites for the semi-crystalline matrix.

Three new azobenzene containing conjugated monomers were designed and synthesized. Resulting monomers were characterized by means of 1H NMR and 13C NMR techniques. Monomers (E)-1,2-bis(4-(thiophen-2-yl)phenyl)diazene (M1), (E)-1,2-bis(4-(4-hexylthiophen-2-yl) phenyl) diazene (M2) and (E)-1,2-bis(2-fluoro-4-(4-hexylthiophen-2-yl)phenyl) diazene (M3) were electrochemically polymerized using cyclic voltammetry to give polymers P1, P2 and P3. The polymers were subjected to spectroelectrochemical and kinetic studies in order to obtain information about their elecrochromic characteristics. P1 and P2 were pale-yellow in their neutral states and blue in oxidized states while P3 showed multichromic property due to having polaron bands in visible region of the spectrum. Addition of fluorine atoms to the backbone of P3, lowered the LUMO level of P3 thus gained the polymer n-doping property. In the second part of this thesis poly((9,9-dioctylfluorene)-2,7-diyl-(4,7-bis(thien-2-yl) 2-dodecyl-benzo[1,2,3]triazole)) (PFTBT) polymer was mixed with common electron acceptor Phenyl-C61-butyric acid methyl ester (PCBM) and used in organic solar cell applications. Active layers containing PFTBT and PCBM were spin casted on ITO coated substrates at varying rotational speeds to obtain active layer thicknesses having different values. Thickness of the active layer was optimized so was the efficiency of organic solar cells. As a result of this optimization study, efficiency of PFTBT containing organic solar cells were increased to 1.06% which is a higher value than previosly reported literature results.