Water pollution represents one of the major concerns of the modern world, after scientific and industrial development that generates hazardous organic and inorganic contaminants. Biochar (BC) has gained tremendous attention in the past decade as a cheap and efficient adsorbent for organic and inorganic contaminants from aqueous solutions. BC is considered to be a low-cost alternative to activated carbon, however, BC typically suffer performance reductions due to their low surface areas and poor mechanical properties. The main objective of this work is to develop novel biochar materials by modifying the biochar surface for the removal of organic and inorganic contaminants from water. In recent years, biochar modifications involving various methods such as, acid/base treatment, impregnation of mineral sorbents, functional groups incorporation, steam activation and magnetic modification have been widely studied. Chapter I summarizes these biochar modification methods. In Chapter II, Chitosan-Modified fast pyrolysis BioChar (CMBC) was used to remove Pb2+ from water. CMBC was made by mixing pine wood biochar with a 2% aqueous acetic acid chitosan (85% deacylated chitin) solution followed by treatment with NaOH. CMBC removed more Pb2+ than non-modified biochar suggesting that modification with chitosan generates amine groups on the biochar surface which enhance Pb2+ adsorption. Chapter III describes the fast nitrate and fluoride adsorption and magnetic separation from water on iron oxide particles dispersed on Douglas Fir biochar. Nitrate and fluoride adsorption occurred by electrostatic attraction over the wide 2 to 10 pH range. In the chapter IV, aniline and nitrobenzene removal from water was studied using magnetized and nonmagnetized Douglas Fir biochar. The adsorption of aniline and nitrobenzene occurred mainly through pi-pi electron interactions over the wide 2 to 12 pH range and H-bonding. The surface morphology, chemistry, and composition of the modified biochars were examined by SEM, SEM-EDX, TEM, PZC, XPS, XRD, FTIR, TGA, DSC, elemental analysis, and surface area measurements.

Molybdenum (Mo) is a naturally occurring trace element that is present in drinking water mostly in the molybdate (MoO42-) form in well water. Recently, the EPA deemed Mo as a potential contaminant because exposure can lead to health effects such as gout, hyperuricemia, and lung cancer. In this work, we have assessed the sorptive removal of Mo using Douglas fir biochar (DFBC) and its chemically-coprecipitated iron oxide analogue (DFMBC). Adsorption was studied varying the batch sorption conditions; pH, equilibrium time (5 min-24 h), initial Mo concentrations (2.5-1000 mg/L), temperatures (5, 25, and 40 °C) and equilibrium method. Langmuir capacities for DFBC and DFMBC (at pH 3, 2 h equilibrium) were in 359.3-487.9 mg/g and 288.3-571.9 mg/g range, respectively. Adsorbents and Mo-laden adsorbents were characterized by elemental analysis, BET, PZC, SEM, TEM, EDS, XRD, and XPS. These data suggest that DFBC and DFMBC can be potential candidates for Mo sorption.

The main aim of this research is to provide a low cost and sustainable biochar for the removal of organic pollutants from aqueous solution. Wastewater pollution by organic contaminants of emerging concern has become a subject of intense discussion. Removing these contaminants from aqueous solution is paramount to improve water quality for both humans and animal consumption. Traditional adsorption techniques using activated carbon are universal and fast, however, they are very costly. This dissertation therefore seeks to find an alternative low cost adsorbent which can be used to adsorb contaminants from aqueous solution. In chapter one, an overview of some of the selected organic contaminants of emerging concern is given. Pharmaceutical and pesticide entry into the environment, their fate and ecotoxicity are highlighted. Available techniques for the removal of contaminants from aqueous solution are also given. Chapter two is a study on the adsorption of some selected pharmaceuticals using a fast pyrolysis low cost biochar produced from pinewood feedstocks. The pinewood biochar used as the adsorbent in this study was made by fast pyrolysis in an augered reactor at a temperature of 425 oC and a residence time of 20-30 s during bio-oil production. In chapter three, switchgrass biochar has been tested for its potential for remediating water that is contaminated with two phenoxy herbicides, 2,4-dichlorophenoxyacetic (2,4-D) acid and 2-methyl-4-chloro-phenoxyacetic acid (MCPA). The adsorption capacity was remarkable when compared to commercial activated carbon per unit of measured surface area. Furthermore, in chapter four, magnetic and non-magnetic low cost biochars have been tested for the removal of the herbicide metribuzin from aqueous solution under different experimental conditions. The magnetic biochar synthesized from raw switchgrass biochar does not show a detrimental effect on the adsorption capacity. Additional value of this magnetic biochar is the ease of separation from contaminated solution following adsorption.