Thesis (Ph. D.)--Ohio State University, 2005. / Title from first page of PDF file. Includes bibliographical references (p. 152-160).

Made available in DSpace on 2014-10-09T12:53:43Z (GMT). No. of bitstreams: 0 / Made available in DSpace on 2014-10-09T13:58:43Z (GMT). No. of bitstreams: 0 / Dissertação (Mestrado) / IPEN/D / Instituto de Pesquisas Energéticas e Nucleares - IPEN-CNEN/SP

Made available in DSpace on 2014-10-09T12:47:03Z (GMT). No. of bitstreams: 0 / Made available in DSpace on 2014-10-09T14:08:48Z (GMT). No. of bitstreams: 1 07916.pdf: 4553798 bytes, checksum: eb42be1de889c1f95e7ccdc661406a8d (MD5) / Dissertacao (Mestrado) / IPEN/D / Instituto de Pesquisas Energeticas e Nucleares - IPEN/CNEN-SP

Made available in DSpace on 2014-10-09T12:53:43Z (GMT). No. of bitstreams: 0 / Made available in DSpace on 2014-10-09T13:58:43Z (GMT). No. of bitstreams: 0 / Materiais cerâmicos à base de óxidos de manganês, de níquel e de cobalto foram preparados por meio de mistura de óxidos seguida de homogeneização e sinterização controlada em 1250 °C. Os óxidos foram caracterizados por meio das técnicas de difração de raios X, fluorescência de raios X, termogravimetria e determinação de distribuição de tamanho de partículas por espalhamento laser. A caracterização dos corpos sinterizados foi feita por meio de análise por microscopia eletrônica de varredura, difração de raios X e fluorescência de raios X. O comportamento termistor foi estudado por meio de medidas de resistividade elétrica pela técnica dc de duas pontas de prova entre temperatura ambiente e 220 °C. Os principais resultados mostram ser possível a preparação de termistores em ampla faixa de resposta elétrica por meio da variação da composição relativa dos óxidos de manganês, de níquel e de cobalto. / Dissertação (Mestrado) / IPEN/D / Instituto de Pesquisas Energéticas e Nucleares - IPEN-CNEN/SP

Made available in DSpace on 2014-10-09T12:47:03Z (GMT). No. of bitstreams: 0 / Made available in DSpace on 2014-10-09T14:08:48Z (GMT). No. of bitstreams: 1 07916.pdf: 4553798 bytes, checksum: eb42be1de889c1f95e7ccdc661406a8d (MD5) / Dissertacao (Mestrado) / IPEN/D / Instituto de Pesquisas Energeticas e Nucleares - IPEN/CNEN-SP

A reação de redução de oxigênio (RRO) e a reação de oxidação do borohidreto (ROB) foram estudadas em eletrólito alcalino em eletrodos formados por diversos tipos de óxidos de manganês dopados com Ni (II) dispersos sobre carbonos Monarch 1000, MM225 e E350. As técnicas de caracterização físico-química foram difração de raios X (DRX), microscopia eletrônica de transmissão de alta resolução (HR-TEM) equipado com espectrômetro de energia dispersiva de raios X (EDX). Já os estudos eletroquímicos compreenderam voltametria cíclica, curvas de polarização de estado quase estacionário além das técnicas de Espectroscopia de massas diferencial on line (DEMS) e Infravermelho com transformada de Fourier in situ (FTIR). Foi observada pequena inserção dos átomos de Ni na estrutura dos MnOx. A fase correspondente a NiMnOx/C está presente na forma de aglomerados nanocristalinos ou em forma de agulhas com tamanhos da ordem de 1,5 a 6,7 nm dependendo do tipo de carbono utilizado como substrato. Manganita (MnOOH) apresentou-se como fase preponderante para óxido de manganês disperso sobre carbono Monarch 1000 enquanto que para materiais dispersos sobre carbono MM225 e E350G a fase MnO2 esta presente em maior quantidade. Estudos eletroquímicos em camada fina utilizando eletrodo disco rotatório revelaram melhores atividade para a RRO e estabilidade para MnOx dopados com níquel. A RRO procede segundo o mecanismo peróxido, seguida pela reação de desproporcionação do íon HO2- formado. A extensão da reação de desproporcionação do íon HO2- aumenta com o aumento da quantidade de Ni. Sobre eletrocatalisadores suportados em carbonos MM225 e E350 a reação de desproporcionação é mais rápida e envolve um total de 4 e- por oxigênio molecular. As curvas de polarização para RRO obtidas na presença do íon BH4- mostraram que todos os materiais são tolerantes à presença do borohidreto. Resultados de DEMS on line e FTIR in situ mostraram que óxidos de manganês dopados com Ni além de serem ativos para RRO são também ativos para a ROB, porém há uma grande influência da composição e da morfologia dos materiais uma vez que, quando fases segregadas de Ni estão presentes nas amostras, a reação compete com a hidrólise heterogênea do BH4- levando a uma diminuição da eficiência faradaica. / The oxygen reduction reaction (ORR) and the borohydride oxidation reaction (BOR) were studied in alkaline medium on Ni (II) doped MnOx catalysts supported on different carbon powder substrates. Characterizations of physico chemical properties were made by X ray diffraction (XRD), high resolution transmition electronic microscopy (HR-TEM) equipped with X ray dispersive energy spectroscopy (EDS). Electrochemical studies involved cyclic voltammetry and oxygen reduction voltammograms. Also it was used Differential Electrochemical Mass Spectrometry on line (DEMS) and Fourier Transform Infra Red Spectrometry (FTIR) in situ. A small insertion of Ni atoms in the MnOx lattice was observed, this consisting of a true doping of the manganese oxide phase. The corresponding NiMnOx phase is present in the form of needles or agglomerates, with crystallite sizes in the order of 1.5-6.7 nm. Layered manganite (MnOOH) phase has been detected for the Monarch1000 supported NiMnOx material, while different species of MnOx phases are present at the E350G and MM225 carbons. Electrochemical studies in thin porous coating active layers in the rotating ring-disk electrode setup revealed that the MnOx catalysts present better ORR kinetics and electrochemical stability upon Ni doping. The ORR follows the so-called peroxide mechanism on MnOx/C catalysts, with the occurrence of minority HO2- disproportionation reaction. The HO2- disproportionation reaction progressively increases with the Ni content in NiMnOx materials. The catalysts supported on the MM225 and E350G carbons promote faster disproportionation reaction, thus leading to an overall four-electron ORR pathway. The results towards ORR in presence of sodium borohydride showed that all materials are tolerant to the presence of BH4- ion into some extent. DEMS on line and FTIR in situ showed that NiMnOx/C are also active toward the BOR, but there is a strong influence of the nature of the electrocatalysts with respect to the morphology, composition, the nature of the carbon substrate and the Ni load. Results indicate that the electrocatalysts containing segregate Ni phases, the bohohydride oxidation occurs together with the heterogeneous hydrolysis of the BH4- ion resulting in a decrease of the faradaic efficiency.

Microbes exert extensive control on redox element cycles. They participate directly orindirectly in the concentration and fractionation of elements by influencing the partitioningbetween soluble and insoluble species. Putative microbially mediated manganese (Mn) oxidesof the birnessite-type, enriched in rare earth elements (REE) + yttrium (Y) were recentlyfound in the Ytterby mine, Sweden. A poorly crystalline birnessite-type phyllomanganate isregarded as the predominant initial phase formed during microbial Mn oxidation. Owing to ahigher specific surface area, this biomineral also enhances the known sorption property of Mnoxides with respect to heavy metals (e.g. REE) and therefore has considerable environmentalimpact.The concentration of REE + Y (2±0.5% of total mass, excluding oxygen, carbon and silicon)in the Ytterby Mn oxide deposit is among the highest ever observed in secondary precipitateswith Mn and/or iron. Sequential extraction provides evidence of a mineral structure where theREE+Y are firmly included, even at pH as low as 1.5. Concentration ratios of Mn oxideprecipitates to fracture water indicate a strong preference for the trivalent REE+Y overdivalent and monovalent metals. A culture independent molecular phylogenetic approach wasadopted as a first step to analyze the processes that microbes mediate in this environment andspecifically how the microbial communities interact with the Mn oxides. Plausible players inthe formation of the investigated birnessite-type Mn oxides are mainly found within theferromanganese genera Hyphomicrobium and Pedomicrobium and a newly identified YtterbyBacteroidetes cluster most closely related to the Terrimonas. Data also indicate that thedetected microorganisms are related to the environmental constraints of the site including lowconstant temperature (8°C), absence of light, high metal content and possibly proximity to theformer storage of petroleum products.

The processes that control the reductive dissolution of Mn0₂ by Fe(II) under conditions simulating the effects of acid mine drainage on subsurface environments and the subsequent precipitation of Fe(III) has been investigated. Results from real-time, in situ X-ray absorption spectroscopy (XAS) flow-through reaction cell studies indicate that a mixed Fe/Mn solid phase with the local structure of the spinel mineral jacobsite (MnFe₂O₄) is formed after the Mn0₂ surfaces are coated with ferric precipitates. In the absence of previously precipitated Fe(III), no reduced manganese solid is formed. The ferric precipitates do not incorporate significant quantities of Mn(II) down gradient from the reactive Fe(II) front. The maximum amount of the original Mn0₂ incorporated into this jacobsite-like solid is 5%. Results from batch experiments showed similar results compared to the flow-through experiments, with an initially fast rate of Mn(II) release, followed by a much slower release after 5-10 min had elapsed. The reaction products, Fe(III)(aq) and Fe(III)(s) were found to decrease the initial reaction rate. A simple model was developed to describe the temporal concentrations of Mn(II)(aq), Fe(II)(aq), and Fe(III)(aq) that include a Langmurian blocking function to describe the effects of the ferric reaction products on the reaction rate. The model also allowed for a second order process to occur at long time that was dependent solely on the aqueous concentrations of Fe(II) and Mn02. The formation of the ferric reaction products were found to transform from aqueous sulfate complexes to (presumable) ternary surface complexes with sulfate. Within 10 h, these precipitates may have formed chains of edge-sharing octahedra on the order of 60 Å. The precipitates have large amount of sulfate associated with them, which may preclude the formation of ferrihydrite, and may indicate the formation of schwertmannite. The average Fe:SO₄ ratio was 4.4 ± 1.0, a value similar to that reported for schwertmannite. The presence of goethite was identified by X-ray diffraction as early as 50 d, indicating that sulfate is being excluded from the precipitates. The release of Mn(II), FeT, and sulfate was controlled by diffusion, which may also be the process that controls the rate of transformation.

Made available in DSpace on 2014-10-09T12:48:47Z (GMT). No. of bitstreams: 0 / Made available in DSpace on 2014-10-09T13:57:54Z (GMT). No. of bitstreams: 1 09602.pdf: 7986999 bytes, checksum: 3925b141ff3cb5747e1bfa4d230c6dbf (MD5) / Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP) / Tese (Doutoramento) / IPEN/T / Instituto de Pesquisas Energeticas e Nucleares - IPEN/CNEN-SP / FAPESP:99/06641-9

Made available in DSpace on 2014-10-09T12:48:47Z (GMT). No. of bitstreams: 0 / Made available in DSpace on 2014-10-09T13:57:54Z (GMT). No. of bitstreams: 1 09602.pdf: 7986999 bytes, checksum: 3925b141ff3cb5747e1bfa4d230c6dbf (MD5) / Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP) / Tese (Doutoramento) / IPEN/T / Instituto de Pesquisas Energeticas e Nucleares - IPEN/CNEN-SP / FAPESP:99/06641-9