京都大学 / 新制・課程博士 / 博士(工学) / 甲第23504号 / 工博第4916号 / 新制||工||1768(附属図書館) / 京都大学大学院工学研究科機械理工学専攻 / (主査)教授 松野 文俊, 教授 泉田 啓, 教授 藤本 健治 / 学位規則第4条第1項該当 / Doctor of Philosophy (Engineering) / Kyoto University / DGAM

The diploma thesis dealswith a design of a robotic cell for depalletization and the establishment of a rail into a production station. Pieces are weighed into the depalletizing unit in a shape-adapted crates otherwise known as blisters. Each blister contains five to eight pieces(depending on the type of a rail) and anti-corrosion paper. After removing the paper and the piece from the blister, an identification code is stamped on the piece. Then the finished piece travels to the next station. The aim of this thesis is to design arobotic cell that can handle all operations in a given cycle time and to create a simulation model in Siemens Process Simulate program to verify the cell functionality.

This Master´s thesis deals with the design of a robotic cell for manipulation operations. By two robots are performed manipulation operations with a product between turntable, station with a pulsed fiber laser, label printer with applicator and conveyor belt. Further, the thesis describes the selection process of each device of the robotic cell, the design of an end effector and a fixture. The robotic cell is designed in compliance with the safety standards. The aim of this thesis is to design the robotic cell, which meets the requirement for a given cycle time. The cycle time is determined using a simulation model of the robotic cell created in PLM software Siemens Process Simulate.