Práce se zabývá návrhem jednoúčelového plně automatického zařízení pro automobilový průmysl, které dávkuje silikonovou směs do pouzdra snímače. V první části práce je řešen návrh mechanické části zařízení, zejména manipulátoru pro polohování dávkovací hlavy. K pohonu manipulátoru je využito pneumatických prvků, které jsou řízeny elektrickými signály. Druhá část práce se zabývá řízením stroje, které je realizováno pomocí PLC systému. Obsluha může ovládat zařízení nebo sledovat aktuální stav na dotykovém panelu. V závěru práce je prezentováno skutečné provedení zařízení a propojení s výrobní linkou.

The aim of my thesis is the suggestion of options; further the choice of the optimal one and finally, the constructional solution of manipulator designed for the paper transfer into the laminating or varnishing machines from the production of KOMFI LLC The basic conception, main dimensions and basic functional mechanisms of manipulator are solved. All of the calculations and procedures are in accordance with valid norms.

This master’s thesis deals with design of manipulator which manipulate the types of shift forks 1/5, 2/4, 3/7 and 6/R. The machine takes parts from the belt, which transports them from mark station. Parts are moved to the straightening machine by manipulator. Straightened parts are transported on the storage place, from which are sorted into the boxes and palletized by robot. As a part of work is the proposal of alternativ solutions, selecting the best solution, the design of the chosen variant and technical calculations of the main parts of the manipulator. The work includes the accompanying drawings, assembly drawings and 3D model.

This thesis deals with design and use of manipuilator with three degrees of freedom. The main objective is to develop appropriate educational platform. Firstly, it deals with definition of the goals and design method based on kinematic and dynamic models. Another section is dedicated to the design and implementation of the electronics needed for the safe and reliable operation of the manipulator as a educational platform. The last part deals with the use of manipulator together with additional sensors as well as vision system. The result is a demonstration of tasks use of manipulator. Example of use of this educational platform is implemented in a few demonstration tasks.

This thesis deals with extending the functionality of robotic manipulator. The main objective is the implementation of control algorithms into microcontroller dsPIC. In the first part, realizable modifications on the manipulator are described. Touch end sensors are replaced by touch less Hall sensors. End effector, which is used for writing, is replaced by gripper for moving items. Another section deals with design PCB with microcontroller and it describes the final program. The last part deals with connection intelligent touch display, which is used for controlling the manipulator. Demonstration application is created to show the use of the display and new end effector.

In these days, on over the world, we ca find a huge CNC centres which are more and more often completely automatized. There is no necessity of human intervention to change or stock the machining tools. All these operations are made thanks of robots and manipulators to economize time and money. Target of this these is conception of the mobile storage stacker which can be made and then transported to the place of usage in a 40ft sea container. After transportation the stacker is completelly reade to use. Thanks of this concept, we gain universal storage stacker for differents conditions without necessity of new concepts and and solutions for each CNC centre.

This diploma thesis is dealing with the concepts behind the Stewart platform based flight simulation phenomena along with the method of inverse kinematics computation. Further, a washout algorithm to provide appropriate vestibular sensing to the pilot and ensuring that platform will not reach its limits is presented. Digital filters designed to be used in the implementation of the washout algorithm and their characteristics are also covered. The last part describes the architecture of the whole system and the implementation of individual parts.

The topic of this master’s thesis is the design of automation assembly station for the completion of part of KC88 compressor in Valeo company. The thesis contains the study of the existing conditions of the old station with operator, measure times and process flow. Based on the findings, the aim is to propose the best solution of workplace arrangement and to design construction solution of the main parts of the automatic assembly station. The result of this thesis is the design of the automatic station with a robot, transport systems, evaluation in terms of return investment and saving process time. The thesis also includes partial drawings and 3D documentation.

This thesis deals with the design of module for control of biaxial cartesian manipulator. Control module recieves signals STEP and DIR from PLC - these signals can have frequency up to 100 kHz. They are processed by the module and send to inputs of drivers, which control motors of biaxial manipulator. Both axis of manipulator are driven simultaneously. PLC is not able to manage this process without this module. Adjusted parameters are displayed on LCD display. Control module is disturbance-resistant. All signals are isolated by fast optocouplers, which guarantee minimum distortion of signals. Data are processed by microprocessor ATXMEGA. Program of microprocessor is written in the C language. It is possible to switch module to NPN or PNP logic and it is also possible to select output voltage 5 or 24 V according to the type and adjustment of used driver for motor control.

The aim of this thesis is design of automatic system for the exchange of milling heads. The diploma thesis was awarded in cooperation with company TRIMILL, a.s. The first part is devoted to a brief analysis of the problems of automation and includes a survey of the current market system of automatic exchange of milling head competing manufacturers. The second part deals with the choice of possible options exchange itself milling heads, the choice of propulsion, guidance etc. Afterwards there is an engineering design of chosen system, the engineering of leading and driving systems, safety features such as detection heads, sensors moving parts of the system and covers the entire system , then analysis of carrier system and covers are made .