In this work, I ´ve been monitoring occurrence of Juniperus communis in south part of {\clqq}CHKO Třeboňsko``, which is protected area. At first I´ve been studying literature specialized in focusing on problems of occurence Juniperus communis in the world and in this concrete area. Than I was systematically creating a net of all the exemplars in proper area, I ´ve been noting their characteristics and taking a photos. I was statistically analyzing the data and compare with other works, which are engaged in this issue.

6 ABSTRAKT Kardiovaskulární onemocnění představují celosvětově nejčastější příčinu úmrtí. Arytmie neboli poruchy srdečního rytmu k této mortalitě přispívají nemalou měrou. Výzkum v oblasti morfologie převodního systému srdečního má více jak stoletou historii, ale oblast ontogeneze není ani v dnešní době dostatečně prozkoumána. Přitom pochopení mechanismů indukce pracovního myokardu ve specializovanou tkáň by mohl být jeden z klíčů k otevření dveří nových možností diagnostiky a terapie onemocnění v této oblasti. Cílem této práce je pochopení vlivu mechanické zátěže na vznik a vývoj převodního systému srdečního. Chci prokázat, že mechanické zatížení srdce krevním oběhem hraje v embryonálním vývoji nezastupitelnou roli v diferenciaci převodního systému srdečního (PSS). Jako model pozorování jsem si vybral kuřecí srdce. Při porovnání dat získaných na srdci ptáků a savců můžeme najít drobné odlišnosti v detailech, nicméně hlavní principy a mechanismy se zdají být stejné. Kuřecí embryo se vyvíjí 21 dní, přičemž toto časové údobí lze podle Hamburgera a Hamiltona rozdělit do 46 stádií. Zpočátku představuje srdce pouze primitivní trubici, která se stáčí v srdeční kličku. Posléze je přeměněna na zralý čtyřoddílový orgán charakteristický pro vyšší obratlovce. Tyto morfologické změny korelují i se změnami šíření...

This thesis is focused on topic of mapping and optimization of processes with particular focus on logistic processes. The work consists of three interconnected parts. The first part contains definitions of important concepts and approaches in three separate areas. The areas are organization processes, logistic processes and Lean management. The second part revolves around suitable methodology, it contains used methods and tools suitable for mapping and analysis of various process as well as principles and tools recommended for optimization of logistic processes. The last part of thesis maps key processes of internal logistics inside of manufacturing factory and analyses logistic system used in organization. The thesis also proposes various recommendations how to make analysed processes better. Analysis and optimization of processes is in the end enriched by recommendations, which should lead to better organization logistics system in the future.

This Master's Thesis focuses on the analysis of the production process of fireplace insert -- chosen product of the company FLAMEN. The goal of this thesis is to analyze the production process of fireplace insert and give recommendations for improvement using Lean Tools. The company FLAMEN is new on the market and has no experience with Lean Manufacturing principles or techniques. The thesis focuses on initial implementation of Lean Manufacturing philosophy into the company. The theoretical basis of Lean Manufacturing, Process mapping and particular Lean Tools are described in the thesis. Further the production process of fireplace insert is analyzed and possible improvements are suggested. These suggestions should lead to initial implementation of Lean Production philosophy in the company FLAMEN.

The thesis deals with integration of claim system (APH) into DWH of Česká pojišťovna. Aim of the thesis is characteristic and introduction of all the activities that need to be done to make the claim system integrated. Main goal is to analyze source data, to propose logical model of individual DWH layers, to analyze and to design specific mappings and to test defined transformations. The thesis is divided into three logical parts. In the first part there is the general theoretical definition of BI/DWH. The second part presents methods, principles, tools and techniques used in BI/DWH department of Česká pojišťovna, there is also realized characteristic of claim system, and finally this part is about presentation of the basic characteristics of the project Integration of claim system into DWH of Česká pojišťovna. The last part of the thesis is devoted to integration of the claims into all layers of company´s DWH, this means that there is done an analysis of the source data, design of logical model, analysis and design of specific mappings and testing. Author of the thesis was personally involved in the project, because of the fact that he cooperated on the analytical part of the project. Author´s contribution consists in comprehensive elaboration of the subject of the thesis, but mainly in the presentation of analytical and other activities, which the author implemented by himself, or participated in them.

The purpose of this diploma thesis is to describe the basic principles of Business Intelligence, its meaning in business reporting with focus on ensuring relevant information for stakeholders and consequently to identify the major risk factors in complex data mapping process of a project carried out for an insurance company Solvency II regulatory reporting. The identification of risks is based on a detailed analysis of the mapping process and its weak points. The main benefit of the thesis will then be the proposed methods by which the risks are mitigated or entirely eliminated. The diploma thesis is focused on specific project, which delivers complex Business Intelligence solution in compliance with Solvency II European insurance regulatory reform. Therefore the flawless mapping of data and mitigation of risks are key to meet the Solvency II requirements on reporting in high quality. The introductory section of the thesis is devoted to definition of Business intelligence and its purpose in organizations. This part also includes the definition of key aspects of successful business reporting and its role in effective decision-making. The other part of the introductory section shortly represents the BI architecture and components of specific Solvency II BI solution. The second main section of the work defines the Solvency II project and describes the specificities of its implementation on a specific project for unnamed organization. Based on the experience of this project is then further described the mapping process of complex data sources. The result is a list of risks arising at each stage of mapping activities. As a completion of the main objective of the thesis there are suggested ways of mitigation for each risk. The benefit of this thesis is that identified risks and the recommendations for their mitigation might lead to more effective project management, increase the quality of its outcomes and satisfaction of company clients.

The aim of the thesis is to suggest recommendation to optimize and increase efficiency in a process of catering ordering in a company Express Deli by using methods of lean six sigma. The work is built as real project od lean six sigma using some methods of the methodology lean six sigma. In the theoretical part of the thesis, methods of lean six sigma used in the practical part, are described. These methods are mainly methods of process mapping. Each chapter is a step of DMAIC methodology. Core part of the thesis is process mapping at a customer side, so in the other part there are all recommendations directly focused on customers requirements. The results of the work are suggested proposals for process improvement. Some of them were implemented during the project.

The diploma thesis is concerned with the implementation of lean components in the production process of selected company. Through the Value Stream Mapping method an analysis of the current state is performed that resulted several shortcomings of the current production process. Based on the outcomes of the analysis, proposal of new production line is made that contributes to increased customer value within a shorter production time, reduce waste and thus to streamlining the production process.

This diploma thesis deals with surveying traverse in the main corridor of the cave Býčí skála in the Moravian karst. Specifically, in the area called Proplavaná skála. The results of the thesis are permanently stabilized points in the state coordinate system S - JTSK and vertical datum Bpv, which will further serve speleologists to conduct documentation of this part of the cave system. Traverse is subsequently displayed in the maps compared to the surface.

The diploma thesis is focused on the implementation of lean production con-ditions into the production process of the selected company, analyze and find bottleneck. Aim of thesis is to eliminate the downtime of the production pro-cess to provide lean conditions for the selected section when introducing a new product and new facilities at the worplace. First part of thesis is devoted to literature review and dealingwith teheoteri-calpreparation, understanding principles and methods of lean production. Second part is dealing with analyzing production processes of product and in-dividual production operations, application of lean production methods and proposals for a new organization of the workplace.