Spelling suggestions: "subject:"messgerät""
1 |
Comparison of wind measurements between a Mini-SODAR PA0, a METEK-SODAR and a 99 m towerLouca, K., Stadler, A., Raabe, A., Ziemann, A. 27 September 2017 (has links)
Doppler-SODAR measurements are commonly used to derive the vertical wind profile. One main advantage of the Mini-SODAR (from the company Remtech) is its small size and weight and therefore it is easy to handle and set up in short time. Two long-term measurements were operated in September and October 2009. A statistical comparison was made between the Mini-SODAR, the tower and the DWD-SODAR (from the company METEK) for the two measurement periods. It is presented here that the Mini-SODAR overestimates the tower measurements and also the
measurements of the DWD-SODAR. It is also shown, that the Mini-SODAR is able to determine the mean flow conditions in the lower boundary layer (up to 200 m).
|
2 |
Design and performance of a nano-Newton torsion balanceKößling, M., Tajmar, M. 06 June 2024 (has links)
Here, we present a novel torsion balance with a torsional spring that can reach a resolution in the nano-Newton range while allowing for a total experimental weight of 2 kg. The balance uses an off-the-shelf electromagnetic actuator, which was calibrated. The oscillation of the balance is damped using an adaptable eddy-current brake to fine-tune the damping factor. Experiments and electronics are controlled and powered through four coaxial liquid contacts. The balance is shown to be highly linear between 0.01 and 300 μN. After an automated post-processing, the noise of a measurement was 1.0 nN, and an applied force of 10 nN had a calculated error of 11.9%.
|
Page generated in 0.0387 seconds