Metal artifacts from the pirate Blackbeard's flagship, Queen Anne's Revenge (1718), were studied and a preliminary assessment of the corrosion products that have formed on them is presented. Artifacts made of iron, lead, tin, copper, mercury, gold, and silver were recovered from the site with only those made of precious metals displaying no corrosion products. Detailed analysis was conducted of the surfaces of pewter artifacts, made from a tin-rich alloy, revealing corrosion products composed of romarchite (SnO), hydroromarchite (5SnO.2H2O), and abhurite (Sn3O(OH)2Cl2). For comparison, corroded pewter artifacts originating from five other archaeological sites submerged in seawater, dating to between ~1550 and 1733, were analyzed. All of these samples also exhibit abhurite, romarchite, and hydroromarchite, however, some of the artifacts also display cassiterite (SnO2). Textural analysis indicates that abhurite is the first alteration product to arise, followed by romarchite and hydroromarchite and, in some cases, ending with the formation of cassiterite. The absence of cassiterite on many samples demonstrates that, while appearing to be stable under the conditions that were present, the phase has not yet had time to form. Because of the very limited stability field for romarchite, its presence on these artifacts seems to be the result of a kinetic effect, while its universal appearance suggests that it is a required step in the oxidation of pure tin to the final most stable phase of cassiterite. Knowledge of the stability of pewter corrosion products and their effectiveness as agents of passivation can provide insight into the processes of tin corrosion. / Master of Science

This thesis paper examines the feasibility of using external-beam PIXE to study the surface enrichment effect in metal artifacts. By varying the energy of the incident proton beam, we penetrated the artifact's surface to different levels and were able to produce a depth profile of the elemental composition of the sample. In this study, the sample set we chose to examine consisted of ancient and modern coins. This paper first describes the surface enrichment effect and theoretically how PIXE can be used to study it. It then details the construction of the components of the external-beam setup. Many of the refinements of the hardware and experimental methods are discussed. It recounts the means of calibration of the detector and analytical tools. Finally, an accounting of the research performed on several coins is set forth, along with data showing the effectiveness of PIXE in complementing other methods of elemental analysis. We found that PIXE revealed statistically significant differences in concentrations of modern coins at the two beam energies we used. Ancient coins did not have similarly significant discrepancies between the two beam energies. The modern coin data suggested depletion in copper in copper-silver and copper-gold alloys, which is consistent with predictions of the theory of the surface enrichment effect. We suggest that the ancient coins are so deeply corroded that the PIXE beam is unable to penetrate adequately to observe surface enrichment. Comparison of our PIXE data to XRF and SEM data suggest that the trends we observed in modern coins are verified by the other methods. We therefore assert that external-beam PIXE is an effective tool for studying the surface enrichment effect, though with the beam energies available at Brigham Young University, the study must be limited to fairly modern coins.

Dual energy X-ray absorptiometry (DXA) has been well established in both clinical and research settings for measurement of bone mineral density (BMD), and is becoming more widely utilized for assessment of body composition. Reliability and validity are essential factors in both applications of this technique; however, neither have been confirmed for the QDR-4500A DXA at Virginia Tech. Therefore, measurements of the whole body (WB), lumbar spine (LS), total proximal femur (TPF) and total forearm (TF) were made in a group of young-adult males and females at two time-points, 5-7 days apart. Significant differences were not found in BMD (g/cm2) at these body sites with repeated measurements by DXA. Furthermore, measures of percent body fat (%BF), lean body mass (LBM), and fat mass (FM) by DXA were reliable. Validity of %BF by DXA was assessed from comparison to single-frequency bioelectrical impedance analysis (BIA). Significant differences were not found in measures of %BF by DXA and BIA. A second study investigated the reliability and validity of the QDR-4500A DXA in measurements of distal tibia (DT) BMD. Significant differences were not found between repeated measurements. Validity was established by a significant correlation between WB BMD and DT BMD. A third study examined the influence of navel jewelry on the accuracy of LS DXA measurements. Repeated measurements with a spine phantom revealed that both a navel ring and a barbell produced significantly greater measures of LS BMD compared to the spine phantom alone. Manual correction of navel jewelry did not eliminate BMD inaccuracies. Data from these studies confirmed that the QDR-4500A DXA at Virginia Tech was a reliable and valid device in measurement of WB, LS, TPF, TF and DT BMD, as well as %BF, LBM, and FM. In addition, effects of navel jewelry on LS BMD have been recognized. Further studies investigating the reliability and validity of DT BMD measures as well as effects of different types, gauges, and shapes of body jewelry on BMD measures in human subjects are warranted. / Master of Science

This diploma thesis deals with reduction of metal artifacts in CT data with submicron resolution. The first part of this thesis briefly describes x-ray computed tomography followed by the description of artifacts of tomographic images and existing approaches of the reduction of metal artifacts. In the second part proposed methods of reduction of metal artifacts and their implementation in Matlab programming environment are described. Finally functionality of algorithms is tested on a newly created database and the results are compared, evaluated and discussed.