<p>The direct methanol fuel cell or DMFC is emerging as a promising alternative energy source for many applications. Developed and developing countries, through research, are fast seeking a cheap and stable supply of energy for an ever-increasing number of energy-consuming portable devices. The research focus is to have DMFCs meeet this need at an affordable cost is problematic. There are means and ways of making this a reality as the DMFC is found to be complementary to secondary batteries when used as a trickle charger, full charger, or in some other hybrid fuel cell combination. The core functioning component is a catalyst containing MEA, where when pure platinum is used, carbon monoxide is the thermodynamic sink and poisons by preventing further reactions at catalytic sites decreasing the life span of the catalyst if the CO is not removed. Research has shown that the bi-functional mechanism of a platinum-ruthenium catalyst is best because methanol dehydrogenates best on platinumand water dehydrogenation is best facilitated on ruthenium. It is also evident that the addition of other metals to that of PtRu/C can make the catalyst more effective and effective and increase the life span even further. In addition to this, my research has attempted to reduce catalyst cost for DMFCs by developing a low-cost manufacturing technique for catalysts, identify potential non-noblel, less expensive metallic systems to form binary, ternary and quarternary catalysts.</p>

Experimental studies showed the feasibility of adding metallic catalysts and tetralin for the upgrade and increased recovery of heavy oil during the in situ combustion process. Further experimental studies also showed the applicability of in situ combustion as a viable method of upgrading and improving recovery of intermediate oils. Three successful experimental runs were performed with heavy oil from Mexico (10.1 degrees API gravity). The first run was the control run without the addition of tetralin or metallic catalysts; the second run used heavy oil premixed with 3 wt% tetralin and 500ppm nickel catalyst; and the third run was with heavy oil premixed with 3 wt% tetralin and 500ppm iron catalyst. For the three runs, the cell production pressure was kept constant at 300 psig. The combustion cell was placed in a vacuum jacket and set to a temperature of 60 degrees C. For the only successful run with the intermediate Texas oil (22.0 degrees API gravity), the production pressure was also kept constant at 300 psig but the vacuum jacket temperature was set to a reservoir temperature of 40oC. During the runs for both oils, samples of produced oils and combustion flue gases were collected at regular intervals for analysis. These analyses included determination of oil viscosity and density, oil recovery, combustion front velocity, and apparent H/C ratio. Experimental results for the intermediate oil run, the oil gravity increased by 6 points showing the upgrading effects of in situ combustion on intermediate oils. Also, the high average combustion temperatures observed during the run indicated that in situ combustion may be applicable to reservoirs of similar characteristics to the intermediate Texas oil reservoir. Heavy oil experimental run results indicated that the use of tetralin and metallic catalysts increase the average combustion front temperature from 484 degrees C to 501 degrees C for the run with nickel catalysts, and from 484 degrees C to 492 degrees C for the run with iron catalysts. These results also show an increase in produced oil recovery from 83% to 90% of oil initially in place for the nickel catalyst run, and 83% to 86% of oil initially in place for the iron catalyst run.

<p>The direct methanol fuel cell or DMFC is emerging as a promising alternative energy source for many applications. Developed and developing countries, through research, are fast seeking a cheap and stable supply of energy for an ever-increasing number of energy-consuming portable devices. The research focus is to have DMFCs meeet this need at an affordable cost is problematic. There are means and ways of making this a reality as the DMFC is found to be complementary to secondary batteries when used as a trickle charger, full charger, or in some other hybrid fuel cell combination. The core functioning component is a catalyst containing MEA, where when pure platinum is used, carbon monoxide is the thermodynamic sink and poisons by preventing further reactions at catalytic sites decreasing the life span of the catalyst if the CO is not removed. Research has shown that the bi-functional mechanism of a platinum-ruthenium catalyst is best because methanol dehydrogenates best on platinumand water dehydrogenation is best facilitated on ruthenium. It is also evident that the addition of other metals to that of PtRu/C can make the catalyst more effective and effective and increase the life span even further. In addition to this, my research has attempted to reduce catalyst cost for DMFCs by developing a low-cost manufacturing technique for catalysts, identify potential non-noblel, less expensive metallic systems to form binary, ternary and quarternary catalysts.</p>

No description available.

Philosophiae Doctor - PhD / The direct methanol fuel cell or DMFC is emerging as a promising alternative energy source for many applications. Developed and developing countries, through research, are fast seeking a cheap and stable supply of energy for an ever-increasing number of energy-consuming portable devices. The research focus is to have DMFCs meeet this need at an affordable cost is problematic. There are means and ways of making this a reality as the DMFC is found to be complementary to secondary batteries when used as a trickle charger, full charger, or in some other hybrid fuel cell combination. The core functioning component is a catalyst containing MEA, where when pure platinum is used, carbon monoxide is the thermodynamic sink and poisons by preventing further reactions at catalytic sites decreasing the life span of the catalyst if the CO is not removed. Research has shown that the bi-functional mechanism of a platinum-ruthenium catalyst is best because methanol dehydrogenates best on platinumand water dehydrogenation is best facilitated on ruthenium. It is also evident that the addition of other metals to that of PtRu/C can make the catalyst more effective and effective and increase the life span even further. In addition to this, my research has attempted to reduce catalyst cost for DMFCs by developing a low-cost manufacturing technique for catalysts, identify potential non-noblel, less expensive metallic systems to form binary, ternary and quarternary catalysts. / South Africa

Biomass valorization is an interesting alternative to fossil resources, which is frequently performed via heterogeneous catalysis. Designing new catalysts is a challenging task that can be significantly accelerated in silico. However, biomass molecules are often complex and highly oxygenated, hence rendering calculations more difficult and time consuming. Among these compounds, polyols are particularly important. We developed linear relations of the Brønsted-Evans-Polanyi (BEP) type from the DFT study of C-H or O-H bond dissociation elementary steps for a family of monoalcohol molecules on metallic catalysts (Co, Ni, Ru, Rh, Pd, Ir, Pt). Such relations aim at predicting activation energies from reaction energies. The accuracy of the obtained linear energy models is better than 0.10 eV on the sampling set. Then, the relations were applied for the prediction of the dehydrogenation elementary steps of glycerol, chosen as a prototype of polyalcohols, with an accuracy better than 0.10 eV and with a systematic error around ±0.10 eV for Rh. Keeping in mind that the main difference between glycerol and monoalcohols comes from intramolecular H-bonds present in the former, we designed linear relations for water-assisted dehydrogenation of monoalcohols. These new relations allowed us to improve the prediction on glycerol and to eliminate the systematic deviation in the case of OH bond breaking. Even if in this study we focused on glycerol dehydrogenation, similar methods may be applied to other polyols with other chemical reactions, and considerably speed up the computational design of solid catalysts. This work paves the way for the development of novel numerical techniques to address the issue of biomass conversion.

La valorisation de la biomasse est une alternative intéressante aux ressources fossiles, et s'effectue fréquemment en catalyse hétérogène. L'élaboration de nouveaux catalyseurs est une tâche ardue qui peut être considérablement accélérée in silico. Cependant les molécules de la biomasse sont souvent complexes et hautement oxygénées, rendant ainsi les calculs plus difficiles et couteux en temps. Parmi ces composés, les polyols sont particulièrement importants. Nous avons développé des relations du type Brønsted-Evans-Polanyi (BEP) à partir d'une étude DFT menée sur une famille de monoalcools concernant les dissociations des liaisons C-H et O-H sur des catalyseurs métalliques (Co, Ni, Ru, Rh, Pd, Ir, Pt). Ces relations ont pour but de prédire l’énergie d’activation d’une étape élémentaire à partir de son énergie de réaction. La précision obtenue par ces modèles linéaires est supérieure à 0.10 eV pour l'échantillon considéré. Ces relations ont ensuite étaient appliquées aux étapes élémentaires de la déshydrogénation du glycérol, choisi comme polyol prototype. On observe une erreur moyenne inférieure à 0.10 eV et une erreur systématique de l'ordre de ± 0.10 eV sur Rh. Etant donné que la principale différence entre les monoalcools et le glycérol, vient des liaisons H intramoléculaires présentes dans celui-ci, nous avons mis en place des relations linéaires pour prédire la déshydrogénation des monoalcools assistée par l'eau. Ces nouvelles relations nous ont permis d'améliorer la prédiction sur le glycérol et même d'éliminer la déviation systématique dans le cas de la rupture de la liaison OH. Même si dans cette étude nous nous sommes focalisés sur la déshydrogénation du glycérol, des méthodes similaires pourraient être appliquées à d'autres polyols avec d'autres réactions chimiques, accélérant ainsi considérablement la recherche in silico de catalyseurs solides. Ce travail pave la route pour le développement de nouvelles techniques numériques pour aborder la question de la conversion de la biomasse. / Biomass valorization is an interesting alternative to fossil resources, which is frequently performed via heterogeneous catalysis. Designing new catalysts is a challenging task that can be significantly accelerated in silico. However, biomass molecules are often complex and highly oxygenated, hence rendering calculations more difficult and time consuming. Among these compounds, polyols are particularly important. We developed linear relations of the Brønsted-Evans-Polanyi (BEP) type from the DFT study of C-H or O-H bond dissociation elementary steps for a family of monoalcohol molecules on metallic catalysts (Co, Ni, Ru, Rh, Pd, Ir, Pt). Such relations aim at predicting activation energies from reaction energies. The accuracy of the obtained linear energy models is better than 0.10 eV on the sampling set. Then, the relations were applied for the prediction of the dehydrogenation elementary steps of glycerol, chosen as a prototype of polyalcohols, with an accuracy better than 0.10 eV and with a systematic error around ±0.10 eV for Rh. Keeping in mind that the main difference between glycerol and monoalcohols comes from intramolecular H-bonds present in the former, we designed linear relations for water-assisted dehydrogenation of monoalcohols. These new relations allowed us to improve the prediction on glycerol and to eliminate the systematic deviation in the case of OH bond breaking. Even if in this study we focused on glycerol dehydrogenation, similar methods may be applied to other polyols with other chemical reactions, and considerably speed up the computational design of solid catalysts. This work paves the way for the development of novel numerical techniques to address the issue of biomass conversion.