Tez (Yüksek Lisans) - Süleyman Demirel Üniversitesi, Fen Bilimleri Enstitüsü, İnşaat Mühendisliği Anabilim Dalı, 2009. / Kaynakça var.

Tez (Yüksek Lisans) - Süleyman Demirel Üniversitesi, Fen Bilimleri Enstitüsü, Jeofizik Mühendisliği Anabilim Dalı, 2008. / Kaynakça var.

UAB „Naujasis Nevėžis“ 2012 metais buvo sukurta ekstruduoto baltyminio priedo LAKTOMIL-1 receptūra, šis produktas skirtas melžiamoms karvėms skirtingais produktyvumo tarpsniais. Baltyminio priedo LAKTOMIL – 1 poveikio, karvių produktyvumui ir pieno kokybei, įvertinimui Lukšių žemės ūkio bendrovėje (Lauciškių komplekse) buvo atliktas 90 dienų trukmės bandymas. Bandymui analogų principu atrinkta 30 Lietuvos juodmargių karvių, jos suskirstytos į dvi grupes (kontrolinę ir bandomąją), po 15 gyvulių kiekvienoje. Kontrolinės grupės karvės buvo šeriamos įprastiniu racionu, sudarytu iš kukurūzų siloso, žolių šienainio, kukurūzų grūdainio, rapsų išspaudų, sojų išspaudų ir mineralų. Bandomosios grupės karvės šertos analogišku racionu, tačiau sojų išspaudos pakeistos baltyminiu priedu LAKTOMIL-1. Siekiant nustatyti LAKTOMIL-1 baltymų virškinamumo laipsnį didžiajame prieskrandyje ir plonosiose žarnose, bendradarbiavome su valstybiniu Estijos „Gyvybės Mokslų Universitetu“, Mitybos ir gyvūnų produktų kokybės katedra (Tartu). Baltymų ir sausosios medžiagos virškinamumas didžiajame prieskrandyje buvo nustatytas in sacco metodu. Tyrimui atrinktos trys karvės, kurioms į didįjį prieskrandį įvestos fistulos. Pašarų mėginiai buvo inkubuojami prieskrandyje 2, 4, 8, 16, 24, 48 ir 72 valandas. Darbo tikslas – nustatyti ekstruduoto baltyminio priedo LAKTOMIL-1 virškinamumą in sacco metodu ir įvertinti skirtingo šėrimo poveikį karvių produktyvumui ir pieno sudėčiai. Darbo uždaviniai: 1. in sacco metodu... [toliau žr. visą tekstą] / Object and tasks of work: Investigate extruded protein additive LAKTOMIL-1 ruminal digestibility, determine influence on cow productivity and milk composition. 1. Explore extruded protein additive ruminal digestibility using in sacco method; 2. Set extruded protein additive impact on dairy cows milk production and composition. Research methodology: In 2012 JSC „Naujasis Nevėžis“ specialists developed new extruded protein additive LAKTOMIL-1, for dairy cows in different stages of productivity. To investigate influence of extruded protein additive to cow’s productivity and milk composition, 90 days experiment was carried out in Lukšiai agricultural company (Lauciškiai farm). Analogues of the principle selected thirty Lithuanian Black/white breed cows, they were divided into 2 groups (control and experimental), each group containing 15 animals. The control group was fed a normal cow ration consisting of corn silage, grass silage, maize, rapeseed meal, soybean cake, and minerals. Experimental cows fed a similar diet, but soybean cake was replaced to extruded protein additive LAKTOMIL-1. During the investigation milk yield was determined by the control milking. Milk quality indices have been analyzed in PE “Milk Analysis” (“Pieno tyrimai”). Been studied milk protein, fat, lactose and urea concentration in milk content. Effective degradability of protein and dry matter was determined by the in sacco method using three fistulated cows. The cows were fed the same basal ration... [to full text]

Šiame darbe nagrinėjama standžių sujungimo mazgų įrengimo įtaka iš anksto įtemptų surenkamų gelžbetoninių sijų laikomajai galiai ir įlinkiams. Laikomosios galios analizės metu nagrinėjama sijų ribinės apkrovos ir tempiamos zonos armatūros kiekio priklausomybė nuo standžiai jungčiai įrengti naudojamos jungiamosios armatūros skerspjūvio ploto ir betono klasės. Sijų įlinkių analizės metu nagrinėjama, kiek galima sumažinti sijų įlinkius, skerspjūvio aukštį ar padidinti tarpatramio ilgį įrengus standžias jungtis. Taip pat atliekama standaus mazgo apspaudimo įtakos sijų įlinkiams analizė. Remiantis moksliniais straipsniais ir mokomosiomis knygomis nagrinėjami įvairūs standaus mazgo įrengimo konstrukciniai sprendiniai bei kontinualių sijų įrąžų ir įlinkių skaičiavimo metodai. Standžios jungties įtempių ir deformacijų būvis tiriamas baigtinių elementų metodu naudojant kompiuterinę statybinių konstrukcijų skaičiavimo programą LUSAS Analyst. Atlikus iš anksto įtemptų surenkamųjų gelžbetoninių sijų, sujungtų tarpusavyje standžiu mazgu, darbo analizę pateikiamos baigiamojo magistro darbo išvados ir pasiūlymai. Darbą sudaro 8 dalys: įvadas, standžių mazgų įrengimo ypatumai ir konstrukcinai sprendiniai, kontinualių sijų įrąžų ir įlinkių skaičiavimo metodai, standžių mazgų įrengimo įtakos sijų laikomajai galiai analizė, standžių mazgų įrengimo įtakos sijų įlinkiams analizė, standaus mazgo analizė baigtinių elementų metodu, išvados ir pasiūlymai, literatūros sąrašas. Darbo apimtis –... [toliau žr. visą tekstą] / The paper investigates precast prestressed beams and increase of their carrying capacity and decrease of deflections by providing rigid connections between adjascent spans. The analysis of carrying capacity includes relations between load capacity (herewith the sectional area of tensile reinforcement) and material properties of rigid connection, such as sectional area of continuity reinforcement and concrete grade. The analaysis of deflections investigates the reduction of beam height and increase of span length by providing moment continuity between adjascent spans. The effects of prestressing rigid connection is also discussed. Various moment continuity provision methods are reviewed. The stress-strain state of rigid connection is analysed by using finite element method. The conclutions and suggestions are made at the end of the thesis. The master thesis includes these parts: introduction, analysis of moment continuity provision methods, review of moment redistribution and deflection calculation methods, analysis of increased load carrying capacity after provision of moment continuity, analysis of decreased deflections after provision of moment continuity, rigid connection analysis using finite element method, conclusions and suggestions, references. Master thesis consists of – 77 p. text without appendixes, 24 pictures, 16 tables, 15 bibliographical entries.

This thesis is devoted to the problem of finding a suitable geometrical de- scription of the domain for the Finite Element Method (FEM). We present the most important methods used in generation and improvement of unstructured triangular meshes (grids) for two dimensional FEM. Possible measures of mesh quality are discussed with respect to their usage in linear Lagrange FEM. The relationship between mesh geometry (especially angles of particular triangles), discretization error and stiffness matrix condition number is examined. Two methods of mesh improvement, based on Centroidal Voronoi Tessellations (CVT) and Optimal Delaunay Triangulations (ODT), are discussed in detail and some results on convergence of CVT based methods are reviewed. Some aspects of these methods, e.g. the relation between density of boundary points and interior mesh vertices and the treatment of the boundary triangles is reconsidered in a new way. We have implemented these two methods and we discuss possible im- provements and new algorithms. A geometrically very interesting idea of recent alternative to FEM, Isogeometric Analysis (IGA), is outlined and demonstrated on a simple example. Several numerical tests are made in order to the compare the accuracy of solutions of isotropic PDEs obtained by FEM on bad mesh, mesh improved...

Diplomová práce Spor o pozitivismus v německé sociologii. Renáta Vondráková. 2012. Abstract The main theme of the work is the issue of positivism dispute, which is commonly referred to discussions that occurred in German sociology in the sixties. It was a debate between advocates of critical theory, which were Theodor W. Adorno and Jürgen Habermas, and the concept of critical rationalism of Karl R. Popper and Hans Albert. The discussion initially was confined to issues related to the logic of the social sciences, for many reasons, but rather applied to differences between the concepts and challenges of science from the perspective of both the above approaches. Also the description and discovery purposes and contexts that led to the overturning topic discussion are devoted to this work. The aim is to describe the external influences as widely as possible and how it affected the final understanding of the dispute, but also how well the positivism dispute turned the concepts of science in the following period. The first part is concerned with social and historical situation in which the dispute arose. Followed by an outline of key terms that in connection with a dispute likely occur, in fact it is the analysis of major issues. Emphasis is placed on a thorough description of the first two contributions to the...

The aim of this thesis was to study RWCT methods used at the beginning of a school attendance and to study appropriate conditions for applying RWCT methods. The thesis deals with searching for the best method of the very initial pupils reading and also appropriate teaching materials with regard to RWCT. There is described a three-phase model of E-U-R education and selected method of critical thinking. The practical part of the thesis contains preparation for lessons processed using RWCT methods and summarizes results of pedagogical action research. The outcomes of the thesis confirm that if pupils have suitable conditions at the beginning of a school attendance, they are able to use RWCT methods in practise.