The diploma thesis is elaborated within frame of masters study programme 2303T010. The work is submitting design of technology production of the drawn part – the holder. The work is based on the study of problems of the deep drawing process and related calculation was designed drawing in instrument with holder according to drawing documentation 2-5M68-12/00. The lower ejector is using for extrusion component. The drawing instrument make use of standardised components and it is solving forms of customary stool close-set on the crank drawing inclinable press LESP 63 A (producer ŠMERAL Brno, plant Trnava), with nominal tensile force 1000 kN. Drawing punch and drawing die are produced from alloyed instrumental steel 19 573, heat-worked according to drawing documentation.

The thesis deals with the design of a suitable technology for serial production of a pin. The component material is structural steel 11,320 5R. Due to the series production and material savings, the molding technology was chosen to be cold. For production, the CM 4-5 ECO HATEBUR process press was designed with a nominal force of 1 700 kN. Progressive tool and drawing documentation of tools for the final operation were also designed. The tool load was verified by manual calculation, and the finite element method was calculated to heat the formed blank due to molding.

This diploma thesis deals with design of roof structure of the church in Brno Lesná. It is arched shell, which is symmetrical only by one axis. The roof is clamped by bond beam at supports of roof structure, which sits on a reinforced concrete walls, which transfers load to foundations. This structure is checked for the Ultimate Limit State and Service Limit State. Text part of design contains report, where is described structural system and technological proces. The structural design report contains assessment proces of designed structure.

Diploma thesis is focused on the design of prestressed concrete membrane from the lightweight concrete. The concrete membrane is in the interaction with the bearing steel structure, which one is supported. I did only one variant of the solution, which was optimized. The goal of the design was determined the initial state of a membrane and ensure to in the end of design working life was the membrane in the compression state and the cracks couldn’t appear. The structure is modelled in the main (longitudinal) direction as a spatial frame in program ANSYS 17.2. This tool enables to perform analysis of the construction stages. The rheology is calculated manually and supplied to the model as relative strain. The whole structure is checked for ultimate limit state and serviceability limit state according to valid Eurocodes. Transverse direction is modelled by shell elements in program RFEM 5.12. Construction stages and global behaviour of the structure were analysed. The checks have been calculated manually and control in program IDEA StatiCa. The attachments of the thesis are drawings, visualisation and schemes of construction stages.

The diploma thesis deals with structural solution of the reinforced structures of the polyfunctional building. The structure is designed and assessed for for ultimate limit state in accordance with ČSN EN 1992-1-1: Design of concrete structures – Part 1-1: General rules and rules for buildings.

The thesis deals with design of suitable methods to determine space relations of the particular crane tracks. These methods are investigated within the accuracy analysis. Test measurements using the designed methods are described and their results are analysed and compared with the applicable standards.

The purpose of the master’s thesis is about a concept of a pedestrian bridge´s bearing construction for pedestrian endorsed wires above a highway R35. The work includes a statical construction calculation of the suspended foot bridge of six spans, which has been chosen from three options. The chosen option is built of a monolithic, pre-stressed concrete board supported by suspenders, which is made by segmental elements above the fast highway. Calculation of a longitudinal direction has been made in an ANSYS application. Assembling status and cross direction of the construction has been modelled at SCIA Engineer. The construction´s recognition has been made manually expect of several towers cross-section, where the judgement has been made at IDEA StatiCa.

Main goal of thesis entitled "Landslide remediation design" is - based on acquired knowledge and submitted documents about the problematic of landslides - to determine the causes of the landslides on II. class road between villages Koryčany and Jestřabice and to propose optimal redevelopment.

THE OBJECT OF THE MASTER THESIS IS TO DESIGN OF SUPPORTING STRUCTURE OF PEDESTRIAN BRIDGE SITUATED OVER THE RIVER OF BEROUNKA. THE THESIS CONTAINS STATIC ANALYSIS OF THE CABLE-STAYED BRIDGE WITH TWO FIELDS, WHICH WAS CALCULATED IN THREE VERSIONS .THE CHOSEN VERSION OF THE BRIDGE CONSIST OF MONOLITIC AND PRECAST CONCRETE BRIDGE DECK, WHICH IS CONSTRAINED USING PRESTRESSED CABELS AND SUPPORTED BY HANGINGS.THE CALCULATIONS OF THE LONGITUDINAL WAS PERFORMED BY COMPUTATIONAL SOFTWARE OF SCIA ENGINEERING 15.1

The aim of this thesis is design of the loadbearing structure of a bridge. Out of two proposed variants was chosen prestressed girder deck of 5 spans. The bridge is built span-by-span in a formwork supported by launching girders. Calculation of load cases is made in software Midas Civil 2021 and Scia Engineer 18.1. The construction is evaluated considering the ultimate limit state and serviceability limit state. The design and evaluation were made according to valid standards.