The topic of this thesis is detailed design of the supporting structure of a bridge. The final design is chosen out of three variants. It is a single beam structure consisting of 6 spans. The supporting structure is prestressed concrete with post-tensioning technology, the impact of phased construction is considered. the subject of the expertise of the structure is ultimate limit state, as well as service limit state, designed according to the code. The thesis also contains drawings, visualization and Engineering Report of the structure.

Diploma thesis is focused on a design of the road bridge of the category S7,5 in cadastral territory of a municipality Polanka nad Odrou. Three preliminary studies have been proposed. Box girder beam with a slant walls were selected for more detailed processing. Construction of the bridge is going to be build by time-dependent analysis on a solid formwork. The calculation of load is done by using computer software Midas Civil 19 v 2.1. and Scia Engineer 19.1. Selected preliminary was assessed according to the recent Europan standards.

The topic o thlis thesis is design of the structure of a bridge. The beam structure is chosen from three variants of the solution, the structure is formed by a bracket above the pillars and prepared prestressed beams. Various construction procedures have been verified and assessed for the serviceability and load-bearing limit states according to the applicable standards and regulations. Drawing documentation and static calculation are processed.

Diploma thesis deals with reconstruction of old beam bridge in town Ledeč nad Sázavou. Three variants of reconsttruction were done. Detailed structural design report was done to one of them, streithening with post-tensioning. Calculation of load effect was solved with finite elemet method via software on grillage model. Construction was checked on ultimate limit state and serviceability limit state. Necessary drawings were elaborated to chosen method.

The diploma thesis deals with design and comparison of variants of cast-in-place concrete sewage tank made from reinforced concrete and pre-stressed concrete. The layout of sewage tank is rectangular. The tank is in longitudinal way divided into two chambers. The tank is not roofed and is partialy embedded in the ground. The design for ultimate limit state and for service limit state is made for both variants. There is focus on generation and development of cracks in service limit state. For calcuation of internal forces is used model made in software SCIA Engineer, based on finite element method. The reinforced concrete and pre-stressed concrete versions are compared in last part in term of volumes of materials needed. Also there are proposed possible savings.

The subject of this diploma thesis is the design of post-tensioned road bridge over the valley. Two preliminary studies have been proposed and one of them was selected for more detailed processing. The selected variant is a box girder with a constant height 2,5 m. The construction id divided into five span and its total lenght is 240 m Span length of construction is 18,0 m. The construction was assessed for ultimate and serviceability limit state acording to standarts and regulation. Drawings and vizualizations ard parts of the diploma thesis.

This work deals with the analysis of reinforced concrete structures according to the currently valid standard EN 1992-1-1 (EC 2) compared with the analysis according to the American standard ACI 318-08. Static solution includes an assessment of slab in local supports, calculation of columns and footings according to 1st critical state for both standards. The slab is also assessed according to the 2st critical state according to EC 2.

Thesis deals with design of steel structure multi-storey office building. Specifically, it is the eight-storey steel structure of rectangular plan with dimensions of 15.4 x 54.4 m and a height of 29.2 meters. The structure is designed for the site Brno. Static calculation is solved by a combination of manual calculation and calculation using software Scia. It is designed structural arrangement, static action, load analysis, calculation of internal forces, the design of dimensions and connections solutions. Thesis includes drawing documentation. The structure is designed in a variant with a frame joints and in variant with articulated joints. Variant with articulated joints is further processed.

Master´s thesis deals with the design and assessment of the roof construction of the multi-purpose hall in Holice. The other two dimensions of the hall are 28 x 45 m. Height of the hall is 11,28 m. Roofing is done in three variants. The final solution is processed for one presentation. The main supporting element is formed by cross-linking arc beam made of laminated wood. Girders are spaced 5 m and connected purlins. Stability of the construction by three field bracings. The cladding is a rafter, shuttering of OSB particle that carry the roof deck.

The project deals with the lower part of the construction of a residential building. The parking spaces are situated in three underground floors. The five floors occur in the over-ground part of the building. The building is based on the secant walls of Milan around the perimeter. Internal walls and columns are supported with micropiles. In this project are designed base plate, external walls and stairs. Static system and the calculation of the internal forces was carried out in Scia Engineer 2012 Student version.