No description available.

The iron ore mining industry makes use of various processes that result in the release of airborne dust into the surrounding atmosphere where workers are exposed, to produce a final product. The deposition in the lung and toxicological influences of airborne dust can be determined by their physical- and chemical characteristics. The Occupational Health and Safety Act (OHSA) regulations for hazardous chemical substances have no current system of how the physical- and chemical properties of particulates originating from specific areas will influence a worker‘s exposure and health, especially for ultrafine particles (UFP). It is therefore imperative to characterise airborne dust containing micrometer and UFP size particles originating from specific areas to determine if there are physical- and chemical characteristics that may or may not have an influence on the workers‘ health. Aim: This pilot study is aimed at the physical- and chemical characterisation of the airborne iron ore dust generated at the process areas of an opencast iron ore mine. Method: Sampled areas included the Primary-secondary crusher, Tertiary crusher, Quaternary crusher and Sifting house. Gravimetric sampling was conducted through the use of static inhalable- and respirable samplers in conjunction with optical- and condensation particle counters that were placed near airborne dust- emitting sources. Physical- and chemical characterisation was done with the use of scanning electron microscopy (SEM) and energy dispersive X-ray spectroscopy (EDS). Results: The results found in the study indicate high mass concentration levels of inhalable dust at all four process areas, as well as high levels of respirable dust found at the primary- secondary crusher area. Particle size distribution optical particle counter (OPC) results indicate that the majority of particles at all four process areas are in the region of 0.3 μm in size. Condensation particle counter (CPC) results integrated with OPC results indicate that at the primarysecondary and Tertiary crushers the majority of particles are found to be in the size fraction <0.3 μm. SEM analysis indicates that particle agglomeration largely occurs in the airborne iron ore dust. Particle splinters originating from larger particle collisions and breakages are present in the airborne dust. EDS analysis indicates that the elemental majority of the airborne iron ore dust consists of iron, oxygen, carbon, aluminium, silicon, potassium and calcium. The elemental percentages differ from each process area where an increase in iron and decrease in impurities can be seen as the ore moves through the beneficiation process from the Primary-secondary crusher to the Sifting house. Conclusion: The results obtained from the physical- and chemical properties of the airborne iron ore dust indicate high risk of over-exposure to the respiratory system, as well as possible ultrafine particle systemic exposure, that may overwhelm the physiological defense mechanisms of the human body and lead to reactive oxygen species (ROS) formation and the development of pathologies such as siderosis, silicasiderosis and lung cancer. / MSc (Occupational Hygiene), North-West University, Potchefstroom Campus, 2014

Micrometer injection moulding is a type of moulding in which moulds have geometrical design features on a micrometer scale that must be transferred to the geometry of the produced part. The difficulties encountered due to very high shear and rapid heat transfer of these systems has motivated this investigation into the fundamental mathematics behind polymer heat transfer and associated processes. The aim is to derive models for polymer dynamics, especially heat dynamics, that are considerably less approximate than the ones used at present, and to translate this into simulation and optimisation algorithms and strategies, Thereby allowing for greater control of the various polymer processing methods at micrometer scales.

The iron ore mining industry makes use of various processes that result in the release of airborne dust into the surrounding atmosphere where workers are exposed, to produce a final product. The deposition in the lung and toxicological influences of airborne dust can be determined by their physical- and chemical characteristics. The Occupational Health and Safety Act (OHSA) regulations for hazardous chemical substances have no current system of how the physical- and chemical properties of particulates originating from specific areas will influence a worker‘s exposure and health, especially for ultrafine particles (UFP). It is therefore imperative to characterise airborne dust containing micrometer and UFP size particles originating from specific areas to determine if there are physical- and chemical characteristics that may or may not have an influence on the workers‘ health. Aim: This pilot study is aimed at the physical- and chemical characterisation of the airborne iron ore dust generated at the process areas of an opencast iron ore mine. Method: Sampled areas included the Primary-secondary crusher, Tertiary crusher, Quaternary crusher and Sifting house. Gravimetric sampling was conducted through the use of static inhalable- and respirable samplers in conjunction with optical- and condensation particle counters that were placed near airborne dust- emitting sources. Physical- and chemical characterisation was done with the use of scanning electron microscopy (SEM) and energy dispersive X-ray spectroscopy (EDS). Results: The results found in the study indicate high mass concentration levels of inhalable dust at all four process areas, as well as high levels of respirable dust found at the primary- secondary crusher area. Particle size distribution optical particle counter (OPC) results indicate that the majority of particles at all four process areas are in the region of 0.3 μm in size. Condensation particle counter (CPC) results integrated with OPC results indicate that at the primarysecondary and Tertiary crushers the majority of particles are found to be in the size fraction <0.3 μm. SEM analysis indicates that particle agglomeration largely occurs in the airborne iron ore dust. Particle splinters originating from larger particle collisions and breakages are present in the airborne dust. EDS analysis indicates that the elemental majority of the airborne iron ore dust consists of iron, oxygen, carbon, aluminium, silicon, potassium and calcium. The elemental percentages differ from each process area where an increase in iron and decrease in impurities can be seen as the ore moves through the beneficiation process from the Primary-secondary crusher to the Sifting house. Conclusion: The results obtained from the physical- and chemical properties of the airborne iron ore dust indicate high risk of over-exposure to the respiratory system, as well as possible ultrafine particle systemic exposure, that may overwhelm the physiological defense mechanisms of the human body and lead to reactive oxygen species (ROS) formation and the development of pathologies such as siderosis, silicasiderosis and lung cancer. / MSc (Occupational Hygiene), North-West University, Potchefstroom Campus, 2014

Micrometer injection moulding is a type of moulding in which moulds have geometrical design features on a micrometer scale that must be transferred to the geometry of the produced part. The difficulties encountered due to very high shear and rapid heat transfer of these systems has motivated this investigation into the fundamental mathematics behind polymer heat transfer and associated processes. The aim is to derive models for polymer dynamics, especially heat dynamics, that are considerably less approximate than the ones used at present, and to translate this into simulation and optimisation algorithms and strategies, Thereby allowing for greater control of the various polymer processing methods at micrometer scales.

No description available.

The global increase in internet usage requires an upgrade of the existing infrastruc- ture. Lasers are a key proponent to improving existing systems, and engineering better gain materials aids in this effort. (InGa)As is the leading material in this field for 1.55 μm communication wavelengths, but can be improved on by changing the substrate from InP to GaAs. Another improvement would be reducing the losses due to Auger recombination. (InGa)(BiAs) is suggested to alleviate many of these issues, as it can be grown on a GaAs substrate and is capable of decreased Auger recombination. By analyzing prospective alloys (and existing ones) using spatial electron localization, a superior candidate for industrial use can be suggested. The localization captures the disorder introduced by alloying and can be associated with material properties such as the gain characteristics and photoluminescence linewidths. These properties are important factors in determining a successor. The subject of two-dimensional materials is another topic which has shown promise in various applica- tions. Examples include flexible, transparent, and miniaturized electronics. Recent research done by Al Balushi et al. suggests that GaN may be stabilized in a two-dimensional sys- tem. By extending the material modelling approach from the telecommunication application to this system, we were able to show which III-V isoelectronic elements can be substituted into GaN. This two-dimensional system may be the only candidate capable of spanning the visible spectrum. We found Phosphorus to be the strongest candidate for decreasing the band gap. / Thesis / Master of Applied Science (MASc)

Crankcase ventilation contributes significantly to diesel engine particulate emissions. Future regulations will not only limit the mass of particulate matter, but also the number of particles. Controlling the source of crankcase emissions is critical to meeting the perennial legislation. Deficiency in the understanding of crankcase emissions generation and the contribution of lubricating oil has been addressed in detail by the experimental study presented in this thesis. A plethora of high speed laser optical diagnostics techniques have been employed to deduce the main mechanisms of crankcase oil aerosol generation. Novel images have captured oil atomisation and passive oil distribution around the crankcase of an optically accessed, motored, four cylinder, off highway, heavy duty, diesel engine. Rayleigh type ligament breakup of oil films present on the surface of dynamic components, most notably the crankshaft, camshaft and valve rockers generated oil drops below 10 micrometers. Data illustrated not only crankcase oil aerosol generation at source, but it has provided valuable information on methods to control oil aerosol generation and improve oil circuit efficiency. The feasibility of utilising computational fluid dynamics to predict crankcase oil aerosol generation has been successfully assessed using the experimental data. Particle sampling has characterised the crankcase emissions from both a fired and motored diesel engine crankcase. The evolution of submicron crankcase particles down to 5 nm has been recorded from both engines, including the isolated contribution of engine oil, at a wide range of engine test points. Results have provided constructive insight into the generation and control of this complex emission. The main mechanism of crankcase oil aerosol generation was found to be crankshaft oil atomisation. This atomisation process has been analysed in detail, involving high speed imaging of primary and satellite drop generation and high speed digital particle image velocity of the crankshaft air flow. A promising mechanism of regulating and controlling crankcase oil aerosol emissions at source has been studied experimentally.

Thin film copper, indium, gallium, selenide (CIGS) solar cells are promising in the field of photovoltaic technology. To reduce material and fabrication cost, as well as increasing electrical properties of the cell, research is ongoing towards ultra-thin film solar cells (absorption layer thickness less than 500 nm). Ultra-thin CIGS solar cells has shown a decrease in interface recombination and improved optical properties when adding a rear contact passivation layer of aluminium oxide. In this work, the process of creating sub-micrometer features of a passivation layer using conventional optical lithography is investigated. To specify, the objective was to optimize the development conditions in the optical lithography process when fabricating equidistant line contacts in aluminium oxide with 800 nm feature size. It was found that line contacts with smaller feature sizes require longer development time, than line contacts with larger feature sizes. The experiments conducted showed that the pre-set development and exposure conditions used by the NOA group are not optimized for 800 nm or smaller line contacts. Further, for the optical lithography process, silicon substrates are not comparable with substrates of soda lime glass coated with molybdenum. Slight underdevelopment of a sample, showed line contacts smaller than the resolution of the laser used in the exposure – suggesting an alternative method of processing small line contacts with optical lithography.

Estados Unidos es el lugar de origen del jazz, se puede decir que esto es geográficamente cierto, mas no culturalmente, ya que se debe tener en cuenta que dicho género se formó con músicos negros en un contexto de segregación racial bien radical, agregando también a los migrantes latinos que aportaron parte de su cultura para la música de la época. El objetivo de este estudio es darle el valor que se merece a las verdaderas raíces del jazz, la influencia afrocaribeña. Con este fin, la pregunta de investigación es la siguiente: ¿Cuáles y cómo fueron las influencias afrocaribeñas en las propuesta musicales de jazz de 1940 a 1965? La pregunta de investigación se responde a través del análisis cultural, histórico y musical de diversos géneros musicales que serían las bases para crear el jazz, además, también se tendrá en cuenta el latin jazz, el cual vendría a ser la fusión de ritmos afrocaribeños con el jazz, pasando también por el auge del rock, el cual también está ligado a esta cuestión, para pasar finalmente a la salsa. Teniendo esto en cuenta, se llega a la conclusión que gran parte de la música occidental tuvo influencia afrocaribeña para el desarrollo de sus géneros musicales, tales como el jazz, el bugalú, el rock & roll, y el rock. Ya que lo afrocaribeño se ha apoyado bastante en la tradición oral, se podrían realizar investigaciones adicionales en los que incluyan testimonios de las personas involucradas en los desarrollos de dichos géneros. / The United States is the place of origin of jazz, it can be said that this is geographically true, but not culturally, since it must be taken into account that this genre was formed with black musicians in a context of very radical racial segregation, also adding to Latino migrants who contributed part of their culture to the music of the time. The objective of this study is to give the value it deserves to the true roots of jazz, the Afro-Caribbean influence. To this end, the research question is the following: What and how were the Afro-Caribbean influences on jazz musical proposals from 1940 to 1965? The research question is answered through the cultural, historical and musical analysis of various musical genres that would be the basis for creating jazz, in addition, Latin jazz will also be taken into account, which would come to be the fusion of Afro-Caribbean rhythms with jazz, also going through the rise of rock, which is also linked to this issue, to finally move on to salsa. Taking this into account, it is concluded that much of Western music had Afro-Caribbean influence for the development of its musical genres, such as jazz, boogaloo, rock & roll, and rock. Since Afro-Caribbean has relied heavily on oral tradition, additional research could be carried out that includes testimonies from the people involved in the development of these genres. / Trabajo de investigación