Spelling suggestions: "subject:"microsupercapacitors"" "subject:"supercapacitor""
1 |
Engineering of Pseudocapacitive Materials and Device Architecture for On-Chip Energy StorageJiang, Qiu 05 March 2019 (has links)
The emergence of micropower-type applications such as self-powered sensors and miniaturized electronic systems has increased interest in on-chip electrochemical energy storage such as microsupercapacitors. Microsupercapacitors (MSCs) are high rate and high power yet miniaturized versions of macroscopic supercapacitors. MSCs with planar configuration have higher power density at potentially comparable energy density to thin-film batteries, while possessing essentially infinite cycle life. They could also offer compatible integration with smart electronic devices on an integrated chip (IC). In this dissertation, state-of-the-art microsupercapacitors based on Ti3C2Tx MXene and other pseudocapacitive electrode materials are proposed. The proposed strategies involve engineering both intrinsic properties of materials, fabrication methods and device architecture.
|
2 |
Graphene-based Materials for Electrochemical Energy StorageYang, Hao January 2017 (has links)
No description available.
|
3 |
Study of Novel Graphene Structures for Energy Storage ApplicationsZhang, Lu January 2016 (has links)
No description available.
|
4 |
Scalable fabrication of High-Rate On-Paper Microsupercapacitors through full inkjet printing / Skalbar tillverkning av höghastighetsmikrosuperkondensatorer på papper genom full bläckstråleutskrift.Li, Zheng January 2022 (has links)
storage devices in micro sizes are receiving more and more attention. One of them, on-paper Microsupercapacitors (MSCs), has become a key energy storage device because of its good mechanical flexibility and high power density. In this project, a triphase system with electrochemically exfoliated graphene and graphene quantum dots to synergistically stabilize PEDOT:PSS in ethylene glycol/water solvent was developed for scalable and reliable inkjet printing. Without any post-treatment, the printed patterns with a large thickness (up to 9 μm, about 0.4 μm per layer) attain a sheet resistance of as low as 4 Ω2−1 and high resolution at a small drop spacing of 10 μm. Thanks to these feature, the areal capacitance of the on-paper MSCs can reach >2 mF cm−2 at a high scan rate of 1000 mV s−1. The device also exhibits excellent mechanical flexibility, long cycle life (>95% capacitance retention after 10000 cycles CV test) and long service time (retain 84% capacitance after 4 months in air without any encapsulation). Moreover, we can directly print the interconnect to connect 4 devices on paper substrate in series or in parallel and thus get rid of metal current collector. / Med den snabba utvecklingen av flexibel och bärbar elektronik får energilagringsenheter i mikrostorlek allt mer uppmärksamhet. En av dem, mikrosuperkondensatorer (MSC) på papper, har blivit en viktig energilagringsenhet på grund av sin goda mekaniska flexibilitet och höga effekttäthet. I det här projektet utvecklades ett trefasigt system med elektrokemiskt exfolierad grafen och grafenkvantprickar för att synergistiskt stabilisera PEDOT:PSS i etylenglykol/vattenlösningsmedel för skalbar och tillförlitlig bläckstråleutskrift. Utan någon efterbehandling uppnår de tryckta mönstren med stor tjocklek (upp till 9 μm, ca 0,4 μmper lager) ett arkmotstånd på så lågt som 4 Ω2−1 och hög upplösning vid ett litet droppavstånd på 10 μm. Tack vare dessa egenskaper kan den ytliga kapacitansen hos MSC på papper nå >2 mF cm−2 vid en hög skanningshastighet på 1000 mV s−1. Anordningen uppvisar också utmärkt mekanisk flexibilitet, lång livslängd (>95% kapacitansbehållning efter 10000 cykler i CV-test) och lång livslängd (behåller 84% kapacitans efter 4 månader i luft utan inkapsling). Dessutom kan vi direkt skriva ut kopplingen för att ansluta fyra enheter på papperssubstratet i serie eller parallellt och på så sätt bli av med metallströmkollektorn.
|
Page generated in 0.1709 seconds