This diploma thesis deals with design of welding power supply for MIG / MAG and MMA technique with continuous output current 120 A. The first, theoretical part is devoted to welding process technology, physical characteristics of electric arc and description of individual welding methods. The thesis also deals with the concept of power converter. The design of the switched-mode power supply is based on a full bridge topology. In order to implement advanced controls of welding power supply, the ARM Cortex M4 microprocessor was selected. Due to the large power consumption of the stepper motor for drive the welding wire, an auxiliary switched-mode power supply was also implemented. The documentation describing the realization of the welding power supply and the results of the measurements are in the last part of the thesis. The welding power supply was successfully revived and reached nominal parameters. Inert gas welding has not been tested yet, due to lack of time caused by extensive work in order to complete mechanical realization.

In this diploma thesis, universal inverter was manufactured and successfully tested with DC, BLDC and AC motor. Inverter is composed of the power board for driving extralow voltage supplied electric motors (from +12V to +24V) and control board with microcontroller MC56F8257. There is also explained the principle of driving DC, BLDC and AC motor as well as description of the most frequently used peripherals and inverter. components

The master´s thesis deals with a design and layout of wireless doorbell with digital voice transmission. It also includes the nRF9E5 circuit analysis. In the beginning of the document there is characterization of the problem in general. Next part describes a layout example for the application schematic, a layout of printed circuit board and a layout of software. nRF9E5 is a true single chip system with fully integrated RF transceiver, 8051 compatible microcontroller and a four input 10 bit AD converter. Despite of all studies of available literature I have found only very little particular information related to this matter. In general, the main aim of this work is to make the wireless doorbell with digital voice transmission. Further, ilustrated schematics are enclosed as a attachement of this thesis.

This project deals with the design of an autonomous microprocessor controlled testing unit for automatic controlling the output of the tested device, depending on the excitation of its inputs. There are possible realizations of testing unit hardware functional blocks described. Possible options are objectively analyzed in accord with the project specification and with regard to the mutual compatibility of individual blocks, availability, price and desired functionality. The most appropriate selected solution is implemented using the specific circuit elements. The output of the project is realized functional testing unit and elaborated product documentation. There was control software for the microprocessor of the unit written. The software implements an interpreter for the test algorithm execution, carries out the test evaluation and stores a record of the test process to the file. There was also the utility for a PC, which allows uploading tests to the testing unit via USB created.

This thesis is focused on design and prototyping of solar panel position control system for an obtaining of the maxima renewable energy from sun. In this thesis, various ways of solar panel positioning are considered and analyzed. Consequently, a construction arrangement of the positioner is presented. It is mechanically adapted to obtain the maximum efficiency in typical environment corresponding with the Central European geographical latitude. Different methods of sun monitoring are considered and analyzed. On the basis of this analysis, a proper prototype of sun monitor for exact positioning with disturbance filtering has been constructed. Following part of work is devoted to stable, fully automated, control subsystem for reliable functionality of solar system. A suitable microprocessor with a robust firmware has been implemented to this control unit. Finally, system parameters measurement and closing analysis of gained renewable energy and backflow computation is presented in the end of this diploma thesis.

This master´s thesis is dealing with the theory of Li-ion accumulators and theirs charching. In this thesis has been designed accumulator tester for automatic charging and discharging of Li-ion accumulator. This tester is controlled by microprocessor.

This thesis deals with a design and implementation of a microprocessing control unit which can be used e.g. for controlling a hydraulic loading crane. This multi-purpose control device contains commonly available computer peripheral components such as a serial line, a USB connection or Bluetooth. When specific sensors are added to this device it can be used for measurements as well as for adjustments. This device also enables to store measured data on an SD/MMC card.

The main purpose of this project is to design and implement a system for controlling targets on a shooting range. This consists of the main control unit and some motor-turning targets. Both control unit and targets are battery powered and use wireless data transfer. This work describes the selection of the proper platform for wireless communication and design of the hardware and software part of the system in relation to low price and high reliability of the equipment. The conclusion of this work should be the system for practical use.

This diploma thesis deals with a basic description of dynamic and condenser microphone, its performance regarding polar patterns and a type of mechanical construction. It also describes a principle of operation of a triode. The thesis deals with selecting of a suitable type of microprocessor to control microphone preamplifier functions. Last part contains a power supply and microphone preamplifier circuits design using a semiconductor and vacuum tube technology.

Master‘s thesis deals with analysis solutions and construction of the devices for data collection. At the beginning, they describe the basic types of devices for data collection. In other parts of the work is compared few commercial devices for data collection, under which the requirements will be selected on the proposed device for data collection. In other chapters of the work devoted to the design of schemes and selecting components for their manufacture. The last chapters are devoted to describing the design of device for data collection.