Spelling suggestions: "subject:"mixed oxide full"" "subject:"mixed oxide fue""
1 |
Analysis of Transuranic Mixed Oxide Fuel in a CANDU Nuclear ReactorMorreale, Andrew C. 04 1900 (has links)
<p>The reprocessing of spent fuel is a key component in reducing the end waste from nuclear power plant operations and creating a sustainable closed fuel cycle. Central to this effort is the extraction and reprocessing of actinide materials to be recycled into fast or thermal reactors. Reprocessed actinides can contribute additional energy and may be partially transmuted in current thermal systems using mixed oxide fuels before being sent to fast reactors. The use of current thermal reactors as an intermediary step significantly reduces the fast reactor infrastructure needed to handle the spent fuel inventory in the long term, and also provides a source of additional energy from existing mined resources in the short term. An optimization of the fast and thermal systems in a closed fuel cycle reduces the end cycle waste to primarily fission products which have little residual value and manageable disposal and monitoring demands. The dissertation explores the design and analysis of an actinide transmutation solution utilizing a current thermal reactor design. The TRUMOX-30 CANDU-900 system defined herein uses a mixed oxide fuel containing 3.1% transuranic actinides extracted from 30 year cooled spent fuel from a prototypical Pressurized Water Reactor (PWR) and mixed with natural uranium. A significant constraint imposed on the design is that the actinide burning is to occur in an existing CANDU design without major changes or infrastructure replacement. Hence the standard CANDU design and analysis methodology was employed to produce and evaluate the system. The phased approach includes extensive neutron transport modeling of the lattice and control device super-cell configurations, which feed forward in to a detailed full core diffusion model of the TRUMOX-30 CANDU-900 design. Suitable fuel burnup and significant actinide conversion was achieved while remaining within the prescribed operational envelope of the CANDU reactor. The design was evaluated against existing operational constraints and limits, performing well and achieving the goal of actinide transmutation with no changes to the reactor design. This effort demonstrated the adaptation of a current CANDU-900 reactor as a platform for intermediary actinide transmutation which may form part of a sustainable and efficient fuel cycle.</p> / Doctor of Philosophy (PhD)
|
2 |
Atomic scale structural modifications in irradiated nuclear fuelsMieszczynski, Cyprian 11 April 2014 (has links) (PDF)
This thesis work reports in depth analyses of measured µ-XRD and µ-XAS data from standard UO2, chromia (Cr2O3) doped UO2 and MOX fuels, and interpretation of the results considering the role of chromium as a dopant as well as several fission product elements. The lattice parameters of UO2 in fresh and irradiated samples and elastic strain energy densities in the irradiated UO2 samples have been measured and quantified. The µ-XRD patterns have further allowed the evaluation of the crystalline domain size and sub-grain formation at different locations of the irradiated fuel pellets. Attempts have been made to determine lattice parameter and next neighbor atomic environment in chromia-precipitates found in fresh chromia-doped fuel pellets. The local structure around Cr in as-fabricated chromia-doped UO2 matrix and the influence of irradiation on the state of chromium in irradiated fuel matrix have been addressed. Finally, for a comparative understanding of fission gases behavior and irradiation induced re-solution phenomenon in standard and chromia-doped UO2, the last part of the present work tries to clarify the fission gas Kr atomic environment in these irradiated fuels. The work performed on Kr, by micro-beam XAS, comprises the determination of Kr next neighbor distances, an estimation of gas atom densities in the aggregates, and apparent internal pressures in the gas bubbles.
|
3 |
Atomic scale structural modifications in irradiated nuclear fuels / Modifications structurales à l’échelle atomique dans les combustibles nucléaires irradiésMieszczynski, Cyprian 11 April 2014 (has links)
Cette thèse présente une analyse approfondie et comparative des résultats de mesures µ-XRD et µ-XAS sur des combustibles UO2 standard, dopé au sesquioxyde de chrome (Cr2O3) et MOX, irradiés ou non. Elle présente également l'interprétation des résultats en regard des effets induits par le chrome en tant que dopant ainsi que par la présence de plusieurs produits de fission. Les paramètres de maille de l’UO2 et les paramètres de densité d'énergie de déformation élastique dans les matériaux irradiés ou non ont été mesurés et quantifiés. Les données de µ-XRD ont en outre permis l'évaluation de la taille des domaines cristallins, ainsi que l’étude de la formation de sous-grains à différentes positions au sein des pastilles de combustibles irradiés. Le paramètre de maille et l'environnement atomique local du chrome dans des précipités d’oxyde de chrome présents dans les pastilles de combustible non-irradié ont également été déterminés. La structure locale du Cr dans la matrice du combustible dopé et l'influence de l'irradiation sur l'état du chrome dans la matrice de combustible ont été étudiées. Enfin, pour une comparaison du comportement des gaz de fission et du phénomène de re-solution induite par l'irradiation dans l’UO2 standard ou dopé, la dernière partie de ce travail propose une tentative d'analyse de l’environnement atomique du Kr dans ces deux combustibles irradiés. Le travail effectué par micro-faisceau XAS sur ce gaz de fission a permis la détermination des distances du Kr avec ses proches voisins, une estimation des densités atomiques des gaz de fission dans les agrégats et des pressions internes apparentes dans ces nano-phases de gaz inertes. / This thesis work reports in depth analyses of measured µ-XRD and µ-XAS data from standard UO2, chromia (Cr2O3) doped UO2 and MOX fuels, and interpretation of the results considering the role of chromium as a dopant as well as several fission product elements. The lattice parameters of UO2 in fresh and irradiated samples and elastic strain energy densities in the irradiated UO2 samples have been measured and quantified. The µ-XRD patterns have further allowed the evaluation of the crystalline domain size and sub-grain formation at different locations of the irradiated fuel pellets. Attempts have been made to determine lattice parameter and next neighbor atomic environment in chromia-precipitates found in fresh chromia-doped fuel pellets. The local structure around Cr in as-fabricated chromia-doped UO2 matrix and the influence of irradiation on the state of chromium in irradiated fuel matrix have been addressed. Finally, for a comparative understanding of fission gases behavior and irradiation induced re-solution phenomenon in standard and chromia-doped UO2, the last part of the present work tries to clarify the fission gas Kr atomic environment in these irradiated fuels. The work performed on Kr, by micro-beam XAS, comprises the determination of Kr next neighbor distances, an estimation of gas atom densities in the aggregates, and apparent internal pressures in the gas bubbles.
|
4 |
Caractérisation et modélisation du comportement thermodynamique du combustible RNR-Na sous irradiation / Characterization and modelling of the thermodynamic behavior of SFR fuel under irradiationPham thi, Tam ngoc 15 October 2014 (has links)
Au-dessus d'un taux de combustion seuil ≥ 7 at %, les produits de fission volatils Cs, I, et Te ou métalliques (Mo) sont partiellement relâchés hors du combustible et finissent par constituer une couche de composés de PF qui remplit progressivement le jeu existant entre la périphérie de la pastille et la surface interne de la gaine en acier inoxydable. Nous appelons cette couche JOG pour Joint Oxyde-Gaine. Mon sujet de thèse est axé sur l'étude thermodynamique du système (Cs, I, Te, Mo, O) + (U, Pu) ainsi que sur l'étude de la diffusion de ces produits de fission à travers le combustible vers le jeu combustible-gaine pour former le JOG.L'étude thermodynamique constitue la première étape de mon travail. Sur la base d'une analyse critique des données expérimentales issues de la littérature, les systèmes Cs-Te, Cs-I, Cs-Mo-O ont été modélisés par la méthode CALPHAD. En parallèle, une étude expérimentale a été entreprise pour valider la modélisation CALPHAD du système binaire Cs-Te. Dans une deuxième étape, les données thermodynamiques résultant de la modélisation CALPHAD ont été introduites dans la base de données du code de calcul thermodynamique ANGE (code interne au CEA dérivé du logiciel SOLGASMIX) dont la finalité est le calcul de la composition chimique du combustible irradié. Dans une troisième étape, le code de calcul thermodynamique ANGE (Advanced Numeric Gibbs Energy minimiser) a été couplé avec le code de simulation du comportement thermomécanique du combustible des RNR-Na GERMINAL V2. / For a burn-up higher than 7 at%, the volatile FP like Cs, I and Te or metallic (Mo) are partially released from the fuel pellet in order to form a layer of compounds between the outer surface of the fuel and the inner surface of the stainless cladding. This layer is called the JOG, french acronym for Joint-Oxyde-Gaine.My subject is focused on two topics: the thermodynamic study of the (Cs-I-Te-Mo-O) system and the migration of those FP towards the gap to form the JOG.The thermodynamic study was the first step of my work. On the basis of critical literature survey, the following systems have been optimized by the CALPHAD method: Cs-Te, Cs-I and Cs-Mo-O. In parallel, an experimental study is undertaken in order to validate our CALPHAD modelling of the Cs-Te system. In a second step, the thermodynamic data coming from the CALPHAD modelling have been introduced into the database that we use with the thermochemical computation code ANGE (CEA code derived from the SOLGASMIX software) in order to calculate the chemical composition of the irradiated fuel versus burn-up and temperature. In a third and last step, the thermochemical computation code ANGE (Advanced Numeric Gibbs Energy minimizer) has been coupled with the fuel performance code GERMINAL V2, which simulates the thermo-mechanical behavior of SFR fuel.
|
Page generated in 0.0437 seconds