The subject of this diploma thesis is to design space heating system for building with five floors, where the first above ground floor is used as commercial space. Designed building have one underground floor and four above ground floors. Diploma thesis is designed as project of Building Service, specifically that of Heating. This diploma thesis contains calculations of the design heat load, design of radiators and others heating surfaces, hydraulic balancing, generation of domestic hot water, design of heat source, calculations of safety devices and pumps design. Part of this diploma thesis is also conceptual design of regulation.

The aim of my thesis was to create a project documentation for a new mixed-use building. The building is situated in the land register of Brno. It is a four storey building without basement, designed into the shape of rectangle. The first floor will be located several shops. Between the second and the fourth floor will be dwelling units. The object is based on the concrete prefabricated beams. It is covered by flat roof with Attica. I designed the project with emphasis on disposal orientation according to the cardinal points and constructed arrangements of the building. During the process I tried to use modern methods, common materials and I tried to separate space for living and space for public.

The subject of the this thesis is newly built mixed-use building in gap site in the Brno on the Křenová street. The object will have four aboveground floors and one underground floor. First floor there are officers, specifically hairdresser, pharmacy and establishement of small office. The whole second floor consists of smaller and bigger offices (if it be necessary, it can be connected in one large office divided into two parts). On the third and fourth aboveground floor there are individually flats. There are two flats 4+kitchen, two flats 2+kitchen, four single flats with kitchen and two barrier-free flats. For these flats, there are basement cellar floor. In the underground floor, there are single cellars in the basement for single-room flats, basement for the operation of the building, a cubicle, a drying room, a bicycle room and office storage. There is an overground parking on the northern side of the object. Thanks to the passage of the building from the north to the south side saves your steps.

The project deals with design of a multifunctional house. The object is situated in the city called Hořice in Hradec Králové region. Terrain of the land is flat. The building consists of a basement and four floors and it has a rectangular plan. There are four shops and ten dwelling units in the house. Layout of the units is three rooms plus one room. Above one part of thrid floor is a flat roof which is made of concrete tiles and vegetation. It serves for relaxing.

This diploma thesis addresses the processing of project documentation for construction of four storey mixed-use bouilding with partial basement in Velké Opatovice. The building is designed on flat terrain. In the basement are located technical utilities of the building and three cellar cubicles. On the first floor there is a beer-shop, textile shop and design office. On the second floor there is an office space for local company. The thrid floor is designed as two large-area apartments with terraces. The fourth floor is designed as one large-area apartment with terraces.

The subject of this diploma thesis is the project documentation of mixed-use building construction, located on Milady Horákové street in the city of Brno, a borough of Černá Pole. Five above-ground floors and one underground floor with an adjacent parking garage are designed. On the first above-ground floor, there are a café, snack bar and main entrances to the building. On the second floor, there are office spaces. On the third to fifth floors, there will be residential units. Above the garage, there is a green roof designed for recreation. The roof above the main building is green also, but it's accessible only for maintenance workers. Entrances for both people and cars are located on the south side of the house. The whole building has a basement. where walls and foundation slab are made of water-impermeable monolithic concrete. Bearing internal masonry is made of monolithic concrete. Both bearing and non-bearing masonry of above-ground floors are made of ceramic blocks. The front and shaft walls are made of plasterboard. The southern facade is designed as ventilated, the northern facade is designed by ETICS. The ceiling structures are of reinforced concrete monolithic slabs. Roofs are green and flat.

The purpose of the thesis is the processing of project documentation fot the construction design of the Mixed-use building in the city of Brno, a borough of Židenice. Underground and first floor are made of cast-in-place concrete. The vertical load-bearing structures of the second, third and fourth floor are designed from ceramic bricks of 300 mm thickness. Floor slabs in the whole building are made of cast-in-place concrete. The last floor has warm flat green roof. The building is designed so that the underground floor is largely made up of underground garages, oriented to the west. Basement of the building is used for technical background of the building too. The first and second above-ground floors are intended primarily fot trade and services, where the all kinds of the offices of the first two above-ground floors makes up to 75% of the floor area. The third and fourth floors are used for housing. The building is oriented from east to west.

The subject of the final thesis is creation of project documentation for construction of a mixed-use building. The main services of this building are housing, offices and small markets. The building is four-storey with a partial basement. The building is founded on strip foundations, load-bearing structures are made of concrete system Velox. The mixed-use building has roofing made like a flat green roof. The building is situated on parcel number 366/1 in city Letovice, cadastre unit Letovice (680711).

The diploma thesis focuses on a mixed-use building with a rectangle-shaped ground plan in Žilina city. The object is four-storey and with no basement. It is split into two sections. The first one provides a space for three operations in northeastern part of the first floor with an attached parking lot. These operations are not further described in this project and depending on investor´s requirements some changes may apply. The second part is an apartment housing section. The first floor contains utility rooms such as storage and buggy room. The housing sections are accessible with two entrances. The apartments are located from the second up to the fourth storey and are designed 1+KK, 2+KK,3+KK and 4+KK respectively. The apartments are assigned with parking spaces isolated from operations parking lot. Vertical bearing walls are made of clay blocks POROTHERM 30 AKU P+D, which are used also as internal bearing party. Internal bearing walls placed in apartments are made POROTHERM 25 AKU P+D and completed by POROTHERM 14 PROFI P+D. Walls will be placed on conrete and reinforced concrete strip foundation. Building has external thermal insulation made by EPS gray 200mm thick. Horizontal load-bearing structures are made by reinforced concrete. Object has flat roof with minimum slope 3%. Damp proof is made by PVC-P membrane. As thermal insulation is used mineral wool.

The topic of this diploma thesis is an elaboration of technical documentation for project of newly-built mixed-use building in Hlučín. Object is located on a quiet suburban area. The building has four floors and is designed from materials typical for our area. On the ground floor is shop and restaurant, on the floors are housing units. The house is covered with a hipped roof.