Diploma thesis focuses on the processing of detailed documentation for newly-built mixed-use building in Frýdek-Místek. The building has three above ground floors. On the first floor there is a restaurant with facilities. On the second and third floor there are office spaces. The building has combined support system, which is a reinforced concrete slab carried by masonry wall system of sand-lime blocks and reinforced concrete columns. The entire building is insulated using external contact thermal insulation system outside the first floor, which is designed ventilated facade with thermal insulation of mineral wool. The roof of the building is designed as a non-walkable flat single roof.

The final thesis is focused on the annex of complex of mixed-use buildings toward the church in Brno-Lisen. A pair of buildings consists of a one-storey Building a community of Salesians and two-storey building with parish office. The group of buildings is located on the southern slope in the housing estate of a block of flats from the 80s. Objects vertically copy a curve of the slope and is increasing to the dominant church building. Block of buildings are adjacent by shorter side to the church building and form a small enclosed courtyard inside. The buildings are designed at brick ceramic blocks, buildings are withnout cellar, with flat green roof. Living rooms are located on the southern facade, the north is reserved for corridors. The entrance to the courtyard is connected to the existing service road. Pedestrian approach builds on the existing surrounding landscaping.

Subject of this final thesis is to develop project documents of a new mixed-use building in Havířov. The building has three floors and basement car park. On the first floor there is a café and shops. On the second and third floor there are office spaces. Structural sytem of building is cast-in-place concrete frame. Exterior building envelope is made of sand-lime bricks with ventilated facade with thermal insulation of mineral wool insulation. The roof of the building is designed as a non-walkable warm flat roof.

Mixed-use building in Prostějov The aim of this master´s thesis is to elaborate the project documentation of a mixed-use building in Prostějov. The thesis consists of three parts: architectural-construction part, building services and elective part. The building has two above-ground floors. On the first floor there are storerooms, utility room, sanitary facilities and restaurant with kitchen and storerooms. The second floor is an office floor for one company which includes offices, dayroom, copyroom, meeting room and sanitary facilities. The building is founded on reinforced concrete foundation. The horizontal load-bearing and non-load-bearing structures are designed from ceramics blocks. The building is insulated by ETICS. The vertical load-bearing structures are designed from Spiroll slabs. The building has a green flat roof. There are parking spaces on the grounds. The building will be heated and cooled with a heat pump. It will also have an air condition. Part of electricity demand is covered by photovoltaics. In the third part of thesis, I replace frequently used materials with environmental ones in my project and compare them in terms of thermal engineering, acoustics and price. I used DEKSOFT, Hluk+, Autocad and Revit software. All structures comply with the valid standards and regulations.

The master thesis designs a mixed-use building in Ledeč nad Sázavou. The thesis consists of three parts. First part presents the project documentation of architectural-construction. Second part proposes the technical equipment of the building. Third part is assessment of the designed building by methodology for multicriteria evaluation of buildings SBToolCZ. The building is located in undeveloped and slightly sloping land. The building has three above-ground floors. There are three different operations in the building, which are a café and an electrical shop and an office part. There is a café, an electrical shop, technical and storage facilities on the first floor. The second and third floor is an office part and company apartment. Structurally, the building is solved by a two-wax load bearing system. The building is founded on footing and foundation slab. Load bearing vertical elements are walls, columns and posts. Externall wall is designed from ceramics block with and mineral insulation. Horizontal load-bearing structures are designed as cast-in-place reinforced slabs. The building has a flat roof. In the building is air condition and cooling system and heating. Part of electricity demand is covered by photovoltaics on the roof. All drawings and visualization are designes in software ArchiCAD.

The subject of the diploma thesis is a project documentation of a multifunctional building within the scope of the implementing documentation. The main goal of the thesis is the design of the layout, construction and material solution, completed by design of the fire safety solutions and assessment in terms of building physics. The multifunctional building has one underground floor and nine above-ground floors. In the basement there are technical facilities of the building and a parking area, in the 1st floor there are business premises, in one part of the 2nd floor there is a gym and the remaining areas are used for administrative purposes as well as the entire 3rd to 9th floor. The construction system is designed as a reinforced concrete monolithic skeleton, completed by a reinforced concrete core. Ceiling structures are monolithic reinforced concrete locally supported slabs. The building is founded on the concrete slab placed on drilled shafts. The main element of the outer wall is curtain walling, which is made from a mullion-transom system.

The subject of this diploma thesis is a project of a new town hall for the district of Brno - sever. Current town hall is situated in the inconvenient building on the Bratislavská street and few decentralised offices are located in separate places. The project should solve current problems as well as to follow current trends in contemporary town hall design. Town halls of these days must cover many functions, not only the accommodation of local government, but also to be the actual centre of the town - the centre of culture, economy and services. The new town hall building is located on corner plot of land in the compound of old Brno Černá Pole barracks. The building provides leasable commercial units as well as office space for the municipal government.

Brno has been considering moving the Main railway station for several decades. Countless urban plans have been done through several competitions, the new South District, which will be located north direction of today's Dolní nádraží station in the future. The architectural study, which was the subject of this diploma thesis, designs multifunctional object called Platform. The building could become part of the emerging South District. The base for the architectural study of the Platform was urban concept of South District designed by me as a pre-diploma thesis. The significance of the South District is comparable to the new Main Railway Station in Vienna surrounded by new district. Those opportunities were the foundation for designing compact urban structure with great variability of public spaces and buildings themselves. The new building is located on the Route of experiences, which is an alternative lane to the main boulevard from the Main Station to the centre of Brno. That starts at the railway station, leads through South District and its main square, the waterfront, through the islands of Svratka, to the park next to the river. Lane continues to the rediscovered railway viaduct and further to today's Main railway station. The viaduct was an inspiration for the architectural design, in the sense of material and shape. The mass of the building itself is divided horizontally into two parts. The lower, heavy masonry brick part of the market is visually separated from the upper objects that seem to levitate above the market. These three upper masses grow from the green roof of the market. Their function is already evident due to their facades. Upper part belongs to the two apartment buildings with a regular grid of south-west orientated windows and one coworking facility located in the northern corner of the Platform. The location of the building is significant. The views from the Platform are amazing - one side there is the Svratka River with island

The object of this master’s thesis is a newly-built mixed-use building in the town of Uherské Hradiště. It includes parking and office spaces, retail shops, and a coffee shop. The building is situated in a mildly sloping terrain near the town centre. It is a three-storey detached building with partial basement. The floor plan was created by joining several different-sized rectangles together. The mixed-use building is based on foundation pads and slabs. It is roofed with a warm flat roof and, above the first floor, with a green roof. The building consists of a cast-in-place reinforced concrete frame with columns and beams. The floor structure is composed of prestressed hollow core slabs. The external wall of the above-ground floors is made of hollow clay blocks and the basement external wall is made of permanent formwork. The wall of the lift shaft is built from reinforced concrete and the staircase is composed of precast reinforced concrete slabs. The external walls are insulated with contact thermal insulation system and in some parts there is timber cladding – ventilated façade with thermal insulation from glass wool. The thermal insulation of the basement and of the plinth is made of extruded polystyrene. The object is divided into several functional zones. On the ground floor there is a coffee shop, a copy shop, a stationery shop, and a bakery. On the first and second floors there are office spaces. In the basement there are technical facilities only. The main entrance of the object is from the northwest part of the plot. There the entrance to the car park is also located, situated to the northwest and southwest side of the plot. Bicycle stands and a place for recycling is also located there. Around the object there is a pavement from which there is wheelchair access to all of the functional zones.